HIK VISION DS-3WF Series User manual

Wireless Bridge
Quick Start Guide

Legal Informaon
©2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and
all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision website ( hps://
www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of
Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH
ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
Wireless Bridge Quick Start Guide
i

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Wireless Bridge Quick Start Guide
ii

Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference in a residenal installaon. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instrucons, may cause harmful interference to radio communicaons. However, there is
no guarantee that interference will not occur in a parcular installaon. If this equipment does
cause harmful interference to radio or television recepon, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separaon between the equipment and receiver.
●Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
●Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
●This device may not cause harmful interference.
●This device must accept any interference received, including interference that may cause
undesired operaon.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked
with "CE" and comply therefore with the applicable harmonized European
standards listed under the RE Direcve 2014/53/EU, the EMC Direcve
2014/30/EU, LVD Direcve 2014/35/EU, the RoHS Direcve 2011/65/EU.
For the RED Direcve 2014/53/EU, the frequency, mode and the maximum
transmied power are listed below:
EU:
Wireless Bridge Quick Start Guide
iii

Model Received
frequency
Transmied
frequency
Bandwidth Frequency
power
DS-3WF
Series
5180 to 5240
MHz
5260 to 5320
MHz
5500 to 5700
MHz
5180 to 5240
MHz
5260 to 5320
MHz
5500 to 5700
MHz
20 MHz, 40
MHz and 80
MHz
802.11ac: 23
dBm
802.11ac: 23
dBm
802.11ac: 30
dBm
US:
Model Received
frequency
Transmied
frequency
Bandwidth Frequency
power
DS-3WF
Series
5180 to 5240
MHz
5260 to 5320
MHz
5500 to 5700
MHz
5745 to 5825
MHz
5180 to 5240
MHz
5260 to 5320
MHz
5500 to 5700
MHz
5745 to 5825
MHz
20 MHz, 40
MHz and 80
MHz
802.11ac: 17
dBm
802.11ac: 24
dBm
802.11ac: 24
dBm
802.11ac: 30
dBm
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For
proper recycling, return this product to your local supplier upon the
purchase of equivalent new equipment, or dispose of it at designated
collecon points. For more informaon see: hp://www.recyclethis.info .
2006/66/EC (baery direcve): This product contains a baery that cannot
be disposed of as unsorted municipal waste in the European Union. See
the product documentaon for specic baery informaon. The baery is
marked with this symbol, which may include leering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the baery to
your supplier or to a designated collecon point. For more informaon
see: hp://www.recyclethis.info .
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operaon is subject to
the following two condions:
Wireless Bridge Quick Start Guide
iv

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired
operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitaon est autorisée aux deux condions suivantes :
1. l'appareil ne doit pas produire de brouillage, et
2. l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est suscepble d'en compromere le fonconnement.
Under Industry Canada regulaons, this radio transmier may only operate using an antenna of a
type and maximum (or lesser) gain approved for the transmier by Industry Canada. To reduce
potenal radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communicaon.
Conformément à la réglementaon d'Industrie Canada, le présent émeeur radio peut fonconner
avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émeeur par
Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intenon des
autres ulisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une
communicaon sasfaisante.
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
Cet équipement doit être installé et ulisé à une distance minimale de 20 cm entre le radiateur et
votre corps.
Wireless Bridge Quick Start Guide
v

Preface
Applicable Models
This manual is applicable to the DS-3WF Series wireless bridge.
Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger
Indicates a hazardous situaon which, if not avoided, will or could
result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if not avoided, could
result in equipment damage, data loss, performance degradaon, or
unexpected results.
Note Provides addional informaon to emphasize or supplement
important points of the main text.
Safety Instrucons
Cauon
●This is a class A product and may cause radio interference in which case the user may be
required to take adequate measures.
●No naked ame sources, such as lighted candles, should be placed on the equipment.
●The serial port of the equipment is used for debugging only.
●Install the equipment according to the instrucons in this manual.
●To prevent injury, this equipment must be securely aached to the oor/wall in accordance with
the installaon instrucons.
●Keep vercal downward when moving or using the equipment.
Warning
●In the use of the product, you must be in strict compliance with the electrical safety regulaons
of the naon and region.
●The socket-outlet shall be installed near the equipment and shall be easily accessible.
Wireless Bridge Quick Start Guide
vi

●Do not connect several devices to one power adapter as adapter overload may cause over-
heang or a re hazard.
●Please make sure that the plug is rmly connected to the power socket.
Wireless Bridge Quick Start Guide
vii

Contents
Chapter 1 Introducon ............................................................................................................... 1
1.1 Interface/Buon .................................................................................................................... 1
1.2 SSID ........................................................................................................................................ 2
1.3 Indicator ................................................................................................................................. 2
1.4 Packing List ............................................................................................................................. 3
Chapter 2 Installaon ................................................................................................................. 5
2.1 Preparaons for Installaon .................................................................................................. 5
2.2 Pole Mounng ....................................................................................................................... 5
2.3 Wall Mounng ....................................................................................................................... 7
2.4 Connecon and Power On ..................................................................................................... 8
2.4.1 AP Connecon ............................................................................................................... 9
2.4.2 CPE Connecon ............................................................................................................. 9
Chapter 3 Acvaon and Login ................................................................................................. 11
3.1 Acvaon Using Web Browser ............................................................................................. 11
3.2 Acvaon Using iVMS 4200 ................................................................................................. 11
Chapter 4 Get More Informaon .............................................................................................. 12
Wireless Bridge Quick Start Guide
viii

Chapter 1 Introducon
The 5 GHz gigabit wireless bridge (hereinaer referred to as the device) is used for long-distance
wireless connecon, which is suited for outdoor video security and transmission between sites in a
LAN. The device supports 16 SSIDs, point-to-point as well as point-to-mulpoint transmission.
1.1 Interface/Buon
Figure 1-1 Interface/Buon of Wireless Bridge
Table 1-1 Interface/Buon Descripon
Interface/Buon Descripon
CPE/AP DIP Switch Switch up or down to set the device as AP or CPE.
SSID 4-character SSID to realize 16 kinds of matching ways by switching up
or down. The CPE will connect to the AP when its SSID matches the
AP's.
Note
The AP's SSID should be unique.
PoE/LAN 1 The 10/100/1000 Mbps adapve RJ45 port, also can be used as a PoE
port.
LAN 2 The 10/100/1000 Mbps adapve RJ45 port.
Reset Long press for 4 sec to restore to factory sengs.
DC 12V If the PoE injector is not used for powering on the device, you can use
the aached power adapter to connect the device to socket.
Wireless Bridge Quick Start Guide
1