HIK VISION DS-3WF02C-5N/O User manual

DS-3WF02C-5N/O Quick Start Guide
i
DS-3WF02C-5N/O
Quick Start Guide

DS-3WF02C-5N/O Quick Start Guide
i
Quick Start Guide
COPYRIGHT © 2019 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to DS-3WF02C-5N/O (Product Series).
The Manual includes instructions for using and managing the product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version in the company website
(http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE
USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.

DS-3WF02C-5N/O Quick Start Guide
ii
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at
his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the
EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of
as unsorted municipal waste in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed
of as unsorted municipal waste in the European Union. See the product documentation
for specific battery information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

DS-3WF02C-5N/O Quick Start Guide
iii
Applicable Models
This manual is applicable to switches below: DS-3WF02C-5N/O (product series).
Symbol Conventions
The symbols that may be found in this document are defined as follows.
During the installation and utilization of the device, please strictly conform to electrical safety
rules in different nations and regions.
You shall acknowledge that the use of the device with Internet access might be under network
security risks, please strengthen protection for your personal information and data security. If
you find the device might be under network security risks, please contact with us.
Symbol
Description
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.

DS-3WF02C-5N/O Quick Start Guide
iv
Catalog
Chapter 1 Introduction ...............................................................................................................5
1.1 Overview ..................................................................................................................................5
1.2 Packing List...............................................................................................................................5
1.3 Appearance ..............................................................................................................................5
1.3.1 Front Panel ......................................................................................................................5
Chapter 2 Installation .................................................................................................................8
Chapter 3 Prepare ....................................................................................................................10
Chapter 4 Configuration ...........................................................................................................12

DS-3WF02C-5N/O Quick Start Guide
5
Chapter 1 Introduction
1.1 Overview
DS-3WF02C-5N/O wireless bridge can be applied in industries, such as wireless video surveillance,
railway, transportation, power and other industries, wireless video/data transmission, wireless
coverage, carrier wireless backbone network construction, Wi-Fi wireless coverage, rural
information construction, and wireless network coverage. The long-distance transmission of the
device can guarantee multi-channel HD video transmission.
1.2 Packing List
The packing list is shown as below. If any accessories are damaged or lost, keep the package intact
and contact your dealer for replacement.
Table 1-1 Packing List of DS-3WF02C-5N/O
1.3 Appearance
1.3.1 Front Panel
Front panel of DS-3WF02C-5N/O is shown as below.
Name
Item
Quantity
Device
DS-3WF02C-5N/O
1
PoE Adapter
24 V, 0.5 A
1
Power Cord
Power Cord
1
Hoop
Hoop for mounting device
1
Quick Start Guide
Instruction manual
1

DS-3WF02C-5N/O Quick Start Guide
6
Front Panel of DS-3WF02C-5N/O
Figure 1-1 DS-3WF02C-5N/O Front Panel
Indicator
Indicators are used to monitor the status of the DS-3WF02C-5N/O. See the following table for the
description of the indicators.
Figure 1-2 Indicators

DS-3WF02C-5N/O Quick Start Guide
7
Table 1-2 Indicator Description
Indicator
Description
Power indicator.
If the green light is steady on, it indicates that the power is on.
LAN
Network connection light.
The light indicates there is one IPC or other network device
connects to the LAN port of PoE adapter.
Blinking means sending data.
WLAN
Wireless indicator light.
The light indicates that the wireless is enabled.
Blinking means sending data.
Signal strength indicator light.
Red light on, indicating that the signal is weak or no signal.
Yellow and red lights on, indicating signal level is medium.
Green, yellow and red lights on, indicating the wireless signal
level is strong
Physical Interface
The hardware interfaces of the DS-3WF02C-5N/O are as follows.
Figure 1-3 Physical Interface
Table 1-3 Physical Interface
Physical Interface
Description
LAN
The reserved network port can be connected to front-end
network devices such as IPC.
Reset
Used to restore the default factory settings.
POE
The network cable is connected to the “POE” on the PoE
power module to provide power and data transmission to the
device.

DS-3WF02C-5N/O Quick Start Guide
8
Chapter 2 Installation
Step 1 Select the unobstructed high point around the device to ensure that the devices are aligned
and there is no obstruction in the middle. Fix the device as shown in the figure below. Attach the
back of the device to the pole, use the hoop to pass through the hoop hole on the back of the
device, tighten the hoop, and fix the device on the pole.
Figure 2-1 Install host
Step 2 Connect the PoE interface of the device to the PoE interface of the PoE power supply
through the network cable. The LAN interface of the device and the LAN interface of the PoE
power supply can be connected to the front-end network devices such as IPC through the network
cable, as shown in the following figure.
Figure 2-2 Power on the device

DS-3WF02C-5N/O Quick Start Guide
9
Step 3 The schematic diagram of the installation of the device is as follows.
Figure 2-3 Finish installation

DS-3WF02C-5N/O Quick Start Guide
10
Chapter 3 Prepare
Step 1 Use a network cable to connect the computer to the LAN interface of the device or PoE
power supply to prepare the device. First, you need to configure the computer IP address and the
device's default IP address to be on the same network segment. Take the Windows 7 system as an
example. Click the network logo in the lower right corner of the desktop and click Open Network &
Internet settings-Network and Sharing Center. As shown below.
Figure 3-1 Network & Internet settings
Step 2 Click “Local Area Connection” on the right and click “Properties”. As shown below.
Figure 3-2 Local Area Connection

DS-3WF02C-5N/O Quick Start Guide
11
Step 3 Double-click Internet Protocol Version 4 (TCP/IPv4). As shown below.
Figure 3-3 Internet Protocol Version 4 (TCP/IPv4)
Step 4 Configure the IP address of the computer to be the unused 192.168.1.X address in the LAN.
X is any integer other than 36 in 2 to 253. The subnet mask is 255.255.255.0. Click "OK" as shown
below.
Figure 3-4 Configure the IP

DS-3WF02C-5N/O Quick Start Guide
12
Chapter 4 Configuration
After the preparation is completed, start the device configuration.
Step 1 Make sure that the IP address of the computer is inconsistent with the default IP address of
the device. On the same network segment, use a browser to log in to the device, open a browser,
and enter the default IP address of the device in the address bar: 192.168.1.36.
When you log in to the device for the first time, click Enter, enter the device activate page. The
user name is admin, and the user password is set by the user. You also need to select your
password, country, language and time zone, as shown in Figure 4-1. Check "I agree to these
terms of use" and click "Activate”. Take the AP device as an example.
Figure 4-1 login

DS-3WF02C-5N/O Quick Start Guide
13
Step 2 Go to the device page and click the “Wizard” bar at the top of the page to enter the
“Network” page to set the IP address of the device. In the address field of the LAN IP, fill in
192.168.1.X, X is any integer from 2 to 253, and the address is not used. The subnet mask can be
used by default. Click “Next” when finished.
Figure 4-2 Wizard –Network
Step 3 Go to the “Wireless” page. The device can modify the wireless parameters such as network
name, frequency, and key through this page. The default wireless mode of the device is the WDS
Station. The default network name of the device is Wireless_R. When pairing with the WDS Access
Point device, please note that the key and the SSID on the WDS Station side must be the same as
the WDS Access Point. Other configurations are recommended to keep the default values. Click
"Next".
Figure 4-3 Wizard –Wireless
Step 4 Go to the Setup “Wizard –Finish”page and click “Change” to save the configuration.

DS-3WF02C-5N/O Quick Start Guide
14
Figure 4-4 Wizard –Finish
Users can also click the “Wireless” bar at the top of the page to enter the “Wireless” page and
modify the network name, frequency, key and other parameters.
Figure 4-5 Wireless
For the WDS Access Point device configuration, please refer to the WDS Station device
configuration.

DS-3WF02C-5N/O Quick Start Guide
15