HIK VISION DS-7604NI-KI/W User manual

Network Video Recorder
User Manual
UD07157B

Network Video Recorder User Manual
1
User Manual
COPYRIGHT © 2017 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to Wi-Fi Network Video Recorder.
The Manual includes instructions for using and managing the product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version in the company website
(http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE
USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.

Network Video Recorder User Manual
2
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his
own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the RE
Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as
unsorted municipal waste in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of
as unsorted municipal waste in the European Union. See the product documentation for
specific battery information. The battery is marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the
battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info

Network Video Recorder User Manual
3
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à
l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communication satisfaisante.
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et
votre corps.

Network Video Recorder User Manual
4
Applicable Models
This manual is applicable to the models listed in the following table.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Series
Model
DS-7600NI-KI/W
DS-7604NI-KI/W
DS-7608NI-KI/W
Symbol
Description
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.

Network Video Recorder User Manual
5
Safety Instructions
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
In the use of the product, you must be in strict compliance with the electrical safety
regulations of the nation and region. Please refer to technical specifications for detailed
information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
Source with 100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to
technical specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may cause
over-heating or a fire hazard.
Please make sure that the plug is firmly connected to the power socket.
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
Ensure unit is installed in a well-ventilated, dust-free environment.
Unit is designed for indoor use only.
Keep all liquids away from the device.
Ensure environmental conditions meet factory specifications.
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of
dropping it may cause damage to the sensitive electronics within the unit.
Use the device in conjunction with an UPS if possible.
Power down the unit before connecting and disconnecting accessories and peripherals.
A factory recommended HDD should be used for this device.
Improper use or replacement of the battery may result in hazard of explosion. Replace with
the same or equivalent type only. Dispose of used batteries according to the instructions
provided by the battery manufacturer.

Network Video Recorder User Manual
6
Product Key Features
General
Connectable to network cameras, network dome and encoders.
Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom,
Canon, PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that
adopt ONVIF or PSIA protocol.
Connectable to the smart IP cameras.
H.265+/H.265/ H.264+/H.264/MPEG4 video formats
Each channel supports dual-stream.
Up to 4 network cameras can be added according to different models.
Independent configuration for each channel, including resolution, frame rate, bit rate, image
quality, etc.
The quality of the input and output record is configurable.
Local Monitoring
HDMI/VGA output is provided.
Multiple screen display in live view is supported, and the display sequence of channels is
adjustable.
Live view screen can be switched in group. Manual switch and auto-switch are provided and
the auto-switch interval is configurable.
Configurable main stream and sub-stream for the live view.
Quick setting menu is provided for live view.
Motion detection, video tampering, video exception alert and video loss alert functions.
Privacy mask.
Multiple PTZ protocols supported; PTZ preset, patrol and pattern.
Zooming in by clicking the mouse and PTZ tracing by dragging mouse.
HDD Management
One SATA interface for one hard disk.
Up to 6TB storage capacity for each disk.
Supports S.M.A.R.T. and bad sector detection.
Supports HDD standby function.
HDD quota management; different capacity can be assigned to different channel.
Recording and Playback
Holiday recording schedule configuration.
Continuous and event video recording parameters.

Network Video Recorder User Manual
7
Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm,
and VCA.
8 recording time periods with separated recording types.
Pre-record and post-record for alarm, motion detection for recording, and pre-record time for
schedule and manual recording.
Searching record files by events (alarm input/motion detection).
Tag adding for record files, searching and playing back by tags.
Locking and unlocking record files.
Local redundant recording.
Provide new playback interface with easy and flexible operation.
Searching and playing back record files by channel number, recording type, start time, end
time, etc.
Smart search for the selected area in the video.
Zooming in when playback.
Reverse playback of multi-channel.
Supports pause, play reverse, speed up, speed down, skip forward, and skip backward when
playback, and locating by dragging the mouse.
Supports thumbnails view and fast view during playback.
Up to 4/8-ch synchronous playback at 1080p.
Supports enabling H.264+ to ensure high video quality with lowered bitrate.
Backup
Export video data by USB device.
Export video clips when playback.
Management and maintenance of backup devices.
Alarm and Exception
Configurable arming time of alarm input/output.
Alarm for video loss, motion detection, tampering, abnormal signal, video input/output
standard mismatch, illegal login, network disconnected, IP confliction, abnormal record, HDD
error, and HDD full, etc.
VCA detection alarm is supported.
VCA search for face detection, vehicle plate, and behavior analysis.
Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending email
and alarm output.
Automatic restore when system is abnormal.
Other Local Functions
Operable by mouse, remote control, or control keyboard.

Network Video Recorder User Manual
8
Three-level user management; admin user is allowed to create many operating accounts and
define their operating permission, which includes the limit to access any channel.
Admin password resetting by exporting/importing the GUID file.
Operation, alarm, exceptions and log recording and searching.
Manually triggering and clearing alarms.
Import and export of device configuration information.
Network Functions
One self-adaptive 100Mbps network interface.
IPv6 is supported.
TCP/IP protocol, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, and iSCSI are supported.
TCP, UDP and RTP for unicast.
Auto/Manual port mapping by UPnPTM.
Support access by Hik-Connect.
Remote web browser access by HTTPS ensures high security.
The ANR (Automatic Network Replenishment) function is supported, it enables the IP camera
save the recording files in the local storage when the network is disconnected, and
synchronizes the files to the NVR when the network is resumed.
Remote reverse playback via RTSP.
Supports accessing by the platform via ONVIF.
Remote search, playback, download, locking and unlocking of the record files, and support
downloading files broken transfer resume.
Remote parameters setup; remote import/export of device parameters.
Remote viewing of the device status, system logs and alarm status.
Remote keyboard operation.
Remote HDD formatting and program upgrading.
Remote system restart and shutdown.
RS-232, RS-485 transparent channel transmission.
Alarm and exception information can be sent to the remote host
Remotely start/stop recording.
Remotely start/stop alarm output.
Remote PTZ control.
Virtual host function is provided to get access and manage the IP camera directly.
Two-way audio and voice broadcasting.
Embedded WEB server.
Development Scalability:
SDK for Windows system.

Network Video Recorder User Manual
9
Source code of application software for demo.
Development support and training for application system.

Network Video Recorder User Manual
10
TABLE OF CONTENTS
Chapter 1 Introduction...................................................................................................................15
1.1 Front Panel .......................................................................................................................15
1.2 Rear Panel ........................................................................................................................15
1.3 IR Remote Control Operations .........................................................................................16
1.3.1 Pairing (Enabling) the IR Remote to a Specific NVR (optional) ...............................16
1.3.2 Unpairing (Disabling) an IR Remote from a NVR.....................................................17
1.3.3 Troubleshooting Remote Control:...........................................................................20
1.4 USB Mouse Operation......................................................................................................22
1.5 Input Method Description................................................................................................23
Chapter 2 Getting Started ..............................................................................................................24
2.1 Device Startup and Activation..........................................................................................24
2.1.1 Starting Up and Shutting Down the NVR ................................................................24
2.1.2 Activating Your Device.............................................................................................25
2.1.3 Using the Unlock Pattern for Login .........................................................................26
2.1.4 Login and Logout.....................................................................................................29
2.1.5 Resetting Your Password .........................................................................................31
2.2 Using Wizard for Basic Configuration...............................................................................32
2.3 Adding and Connecting the IP Cameras...........................................................................37
2.3.1 Activating the IP Camera.........................................................................................37
2.3.2 Adding the Online IP Cameras.................................................................................38
2.3.3 Editing the Connected IP Cameras and Configuring Customized Protocols ...........43
2.3.4 Binding IP Camera ...................................................................................................47
Chapter 3 Live View .......................................................................................................................49
3.1 Introduction of Live View.................................................................................................49
3.2 Operations in Live View Mode.........................................................................................50
3.2.1 Using the Mouse in Live View .................................................................................50
3.2.2 Quick Setting Toolbar in Live View Mode ...............................................................51
3.3 Adjusting Live View Settings ............................................................................................54
3.4 Channel-Zero Encoding ....................................................................................................57
Chapter 4 PTZ Controls .................................................................................................................58
4.1 Configuring PTZ Settings ..................................................................................................58
4.2 Setting PTZ Presets, Patrols & Patterns............................................................................60

Network Video Recorder User Manual
11
4.2.1 Customizing Presets ................................................................................................60
4.2.2 Calling Presets .........................................................................................................60
4.2.3 Customizing Patrols.................................................................................................61
4.2.4 Calling Patrols..........................................................................................................62
4.2.5 Customizing Patterns ..............................................................................................63
4.2.6 Calling Patterns .......................................................................................................64
4.2.7 Customizing Linear Scan Limit.................................................................................64
4.2.8 Calling Linear Scan...................................................................................................65
4.2.9 One-touch Park .......................................................................................................66
4.3 PTZ Control Panel .............................................................................................................68
Chapter 5 Recording Settings........................................................................................................70
5.1 Configuring Parameters....................................................................................................70
5.2 Configuring Recording Schedule ......................................................................................73
5.3 Configuring Motion Detection Recording ........................................................................77
5.4 Configuring Alarm Triggered Recording ...........................................................................79
5.5 Configuring VCA Event Recording ....................................................................................81
5.6 Manual Recording ............................................................................................................83
5.7 Configuring Holiday Recording.........................................................................................84
5.8 Files Protection ................................................................................................................86
5.8.1 Locking the Recording Files.....................................................................................86
Chapter 6 Playback .........................................................................................................................89
6.1 Playing Videos ..................................................................................................................89
6.1.1 Instant Playback ......................................................................................................89
6.1.2 Playing Back by Normal Search ...............................................................................89
6.1.3 Playing back by Smart Search..................................................................................93
6.1.4 Playing Back by Event Search ..................................................................................96
6.1.5 Playing Back by Tag .................................................................................................97
6.1.6 Playing Back by System Logs .................................................................................100
6.1.7 Playing Back External File......................................................................................102
6.2 Auxiliary Functions of Playback......................................................................................103
6.2.1 Playing Back Frame by Frame ...............................................................................103
6.2.2 Thumbnails View...................................................................................................103
6.2.3 Fast View ...............................................................................................................104
6.2.4 Digital Zoom ..........................................................................................................104
6.2.5 File Management ..................................................................................................105

Network Video Recorder User Manual
12
Chapter 7 Backup..........................................................................................................................107
7.1 Backing up Record Files..................................................................................................107
7.1.1 Backing up by Normal Video Search.....................................................................107
7.1.2 Backing up by Event Search...................................................................................109
7.1.3 Backing up Video Clips ..........................................................................................111
7.2 Managing Backup Devices..............................................................................................111
Chapter 8 Alarm Settings.............................................................................................................113
8.1 Setting Motion Detection Alarm ....................................................................................113
8.2 Setting Sensor Alarms ....................................................................................................115
8.3 Detecting Video Loss Alarm ...........................................................................................118
8.4 Detecting Video Tampering Alarm.................................................................................120
8.5 Handling Exceptions Alarm ............................................................................................122
8.6 Setting Alarm Response Actions ....................................................................................123
8.7 Triggering or Clearing Alarm Output Manually ..............................................................127
Chapter 9 VCA Alarm ..................................................................................................................128
9.1 Face Detection................................................................................................................128
9.2 Vehicle Detection ...........................................................................................................130
9.3 Line Crossing Detection..................................................................................................131
9.4 Intrusion Detection ........................................................................................................134
9.5 Region Entrance Detection.............................................................................................136
9.6 Region Exiting Detection ................................................................................................137
9.7 Unattended Baggage Detection .....................................................................................137
9.8 Object Removal Detection .............................................................................................138
9.9 Audio Exception Detection.............................................................................................138
9.10 Sudden Scene Change Detection .................................................................................139
9.11 Defocus Detection........................................................................................................140
9.12 PIR Alarm......................................................................................................................140
Chapter 10 VCA Search................................................................................................................141
10.1 Face Search...................................................................................................................141
10.2 Behavior Search............................................................................................................143
10.3 Plate Search..................................................................................................................144
10.4 People Counting ...........................................................................................................145
10.5 Heat Map......................................................................................................................146
Chapter 11 Network Settings ......................................................................................................148
11.1 Configuring General Settings .......................................................................................148

Network Video Recorder User Manual
13
11.2 Configuring Wi-Fi Settings ...........................................................................................150
11.3 Configuring Advanced Settings ....................................................................................151
11.3.1 Configuring Hik-Connect .....................................................................................151
11.3.2 Configuring DDNS................................................................................................153
11.3.3 Configuring NTP Server .......................................................................................154
11.3.4 Configuring SNMP ...............................................................................................155
11.3.5 Configuring More Settings ..................................................................................156
11.3.6 Configuring HTTPS Port....................................................................................... 157
11.3.7 Configuring Email ................................................................................................159
11.3.8 Configuring NAT ..................................................................................................161
11.3.9 Configuring Virtual Host .....................................................................................163
11.4 Checking Network Traffic .............................................................................................164
11.5 Configuring Network Detection ...................................................................................166
11.5.1 Testing Network Delay and Packet Loss ..............................................................166
11.5.2 Exporting Network Packet...................................................................................166
11.5.3 Checking the Network Status..............................................................................167
11.5.4 Checking Network Statistics................................................................................168
Chapter 12 HDD Management ...................................................................................................170
12.1 Initializing HDDs ...........................................................................................................170
12.2 Configuring Quota Mode .............................................................................................172
12.3 Checking HDD Status....................................................................................................174
12.3.1 Checking HDD Status in HDD Information Interface...........................................174
12.3.2 Checking HDD Status in HDD Information Interface...........................................174
12.4 HDD Detection .............................................................................................................176
12.4.1 S.M.A.R.T. Settings...............................................................................................176
12.4.2 Bad Sector Detection ..........................................................................................177
12.5 Configuring HDD Error Alarms .....................................................................................178
Chapter 13 Camera Settings ........................................................................................................179
13.1 Configuring OSD Settings .............................................................................................179
13.2 Configuring Privacy Mask.............................................................................................180
13.3 Configuring Video Parameters .....................................................................................182
Chapter 14 NVR Management and Maintenance ....................................................................183
14.1 Viewing System Information........................................................................................183
14.2 Searching & Exporting Log Files...................................................................................184
14.3 Importing/Exporting IP Camera Info............................................................................186

Network Video Recorder User Manual
14
14.4 Importing/Exporting Configuration Files .....................................................................187
14.5 Upgrading System.........................................................................................................188
14.5.1 Upgrading by Local Backup Device......................................................................188
14.5.2 Upgrading by FTP ................................................................................................188
14.6 Restoring Default Settings............................................................................................190
Chapter 15 Others .........................................................................................................................191
15.1 Configuring General Settings .......................................................................................191
15.2 Configuring DST Settings ..............................................................................................193
15.3 Configuring More Settings ...........................................................................................194
15.4 Managing User Accounts..............................................................................................195
15.4.1 Adding a User ......................................................................................................195
15.4.2 Deleting a User ....................................................................................................198
15.4.3 Editing a User ......................................................................................................198
Chapter 16 Appendix ...................................................................................................................201
16.1 Specifications ...............................................................................................................201
16.2 Glossary........................................................................................................................202
16.3 Troubleshooting ...........................................................................................................203
16.4 List of Compatible IP Cameras......................................................................................211
16.4.1 List of Hikvision IP Cameras ................................................................................211
16.4.2 List of Third-party IP Cameras .............................................................................221

Network Video Recorder User Manual
15
Chapter 1 Introduction
1.1 Front Panel
Figure 1-1 Front Panel
Table 1-1 Panel Description
No.
Name
Description
1
Power indicator
Turns green when NVR is powered up.
2
HDD indicator
Blinks red when HDD is reading/writing.
3
Network indicator
Blinks green when network connection is functioning
normally.
1.2 Rear Panel
Figure 1-2 Rear Panel

Network Video Recorder User Manual
16
Table 1-2 Panel Description
No.
Name
Description
1
Wi-Fi Antenna
Wi-Fi antenna interface.
2
Power supply
12 VDC power supply.
3
Audio out
2 RCA connectors for audio output.
4
VGA
VGA video output connector.
5
LAN
One RJ-45 10M/100M self-adaptive Ethernet interfaces
provided.
6
Wi-Fi Antenna
Wi-Fi antenna interface.
7
HDMI
HDMI video output connector.
8
USB
Two USB 2.0 interface.
9
Ground
Ground (needs to be connected when device starts up).
1.3 IR Remote Control Operations
The NVR may also be controlled with the included IR remote control, shown in Figure 1-3.
Batteries (2×AAA) must be installed before operation.
The IR Remote is set at the factory to control the NVR (using default Device ID# 255) without any
additional steps. Device ID# 255 is the default universal device identification number shared by the
NVRs. You may also pair an IR Remote to a specific NVR by changing the Device ID#, as follows:
1.3.1 Pairing (Enabling) the IR Remote to a Specific NVR (optional)
You can pair an IR Remote to a specific Hikvision NVR by creating a user-defined Device ID#. This
feature is useful when using multiple IR Remotes and NVRs.
On the NVR:
Step 1 Go to General > More Settings.
Step 2 Type a number (255 digits maximum) into the Device No. field.
Step 3 :
Step 4 Press the DEV button.
Step 5 Use the Number buttons to enter the Device ID# that was entered into the NVR.

Network Video Recorder User Manual
17
Step 6 Press Enter button to accept the new Device ID#.
Figure 1-3 Remote Control
1.3.2 Unpairing (Disabling) an IR Remote from a NVR
To unpair an IR Remote from a NVR so that the unit cannot control any NVR functions, proceed as
follows:
Press the DEV key on the IR Remote. Any existing Device ID# will be erased from the unit’s memory
and it will no longer function with the NVR.
(Re)-enabling the IR Remote requires pairing to a NVR. See “Pairing the IR Remote to a Specific
NVR (optional),” above.
The keys on the remote control closely resemble the ones on the front panel. See the table 1.4.

Network Video Recorder User Manual
18
Table 1-3 IR Remote Functions
No.
Name
Function Description
1
POWER
ON/OFF
•To Turn Power On:
- If User Has Not Changed the Default NVR Device ID# (255):
1. Press Power On/Off button (1).
- If User Has Changed the NVR Device ID#:
1. Press DEV button.
2. Press Number buttons to enter user-defined Device ID#.
3. Press Enter button.
4. Press Power button to start device.
•To Turn NVR Off:
- If User Is Logged On:
1. Hold Power On/Off button (1) down for five seconds to
display the “Yes/No” verification prompt.
2. Use Up/Down Arrow buttons (12) to highlight desired
selection.
3. Press Enter button (12) to accept selection.
- If User Is Not Logged On:
1. Hold Power On/Off button (1) down for five seconds to
display the user name/password prompt.
2. Press the Enter button (12) to display the on-screen keyboard.
3. Input the user name.
4. Press the Enter button (12) to accept input and dismiss the
on-screen keyboard.
5. Use the Down Arrow button (12) to move to the “Password”
field.
6. Input password (use on-screen keyboard or numeric buttons
(3) for numbers).
7. Press the Enter button (12) to accept input and dismiss the
on-screen keyboard.
8. Press the OK button on the screen to accept input and display
the Yes/No” verification prompt (use Up/Down Arrow buttons
(12) to move between fields)
9. Press Enter button (12) to accept selection.

Network Video Recorder User Manual
19
User name/password prompt depends on NVR is configuration.
See “System Configuration” section.
2
DEV
Enable IR Remote: Press DEV button, enter NVR Device ID# with
number keys, press Enter to pair unit with the NVR
Disable IR Remote: Press DEV button to clear Device ID#; unit will
no longer be paired with the NVR
3
Numerals
Switch to the corresponding channel in Live View or PTZ Control
mode
Input numbers in Edit mode
4
EDIT
Delete characters before cursor
Check the checkbox and select the ON/OFF switch
5
A
Adjust focus in the PTZ Control menu
Switch on-screen keyboards (upper and lower case alphabet,
symbols, and numerals)
6
REC
Enter Manual Record setting menu
Call a PTZ preset by using the numeric buttons in PTZ control
settings
Turn audio on/off in Playback mode
7
PLAY
Go to Playback mode
Auto scan in the PTZ Control menu
8
INFO
Reserved
9
VOIP
Switches between main and spot output
Zooms out the image in PTZ control mode
10
MENU
Return to Main menu (after successful login)
N/A
Show/hide full screen in Playback mode
12
DIRECTION
Navigate between fields and menu items
Use Up/Down buttons to speed up/slow down recorded video,
and Left/Right buttons to advance/rewind 30 secs in Playback
mode
Cycle through channels in Live View mode