HIK VISION ICVS User manual

0
ICVS
User Manual

ICVS User Manual
1
TABLE OF CONTENTS
Chapter 1 Login and Activation ..........................................................................................................................7
1.1 Login..................................................................................................................................................... 7
1.2 Device Activation................................................................................................................................... 7
Chapter 2 Shortcut.............................................................................................................................................9
Chapter 3 Overview ......................................................................................................................................... 11
3.1 System Performance............................................................................................................................ 11
3.1.1 View Performance .................................................................................................................... 11
3.1.2 View CPU and Memory Usage ................................................................................................... 11
Chapter 4 Device.............................................................................................................................................. 13
4.1 Node Tree ........................................................................................................................................... 13
4.1.1 View Node Tree ........................................................................................................................ 13
4.1.2 Map.......................................................................................................................................... 13
4.2 Node Status ........................................................................................................................................ 13
4.3 Device Overview.................................................................................................................................. 14
4.3.2 Locate Device............................................................................................................................ 14
4.3.3 Mute Device ............................................................................................................................. 15
4.3.4 Reboot and Shut down Device................................................................................................... 15
4.3.5 More Operations....................................................................................................................... 15
4.4 Device Graph of a Node....................................................................................................................... 15
4.4.1 Device Indicator........................................................................................................................ 15
4.4.2 HDD Slot Graph......................................................................................................................... 16
4.4.3 Information Overview ............................................................................................................... 17
Chapter 5 Log................................................................................................................................................... 25
5.1 Search Log........................................................................................................................................... 25
5.2 Download Log ..................................................................................................................................... 25
5.3 Clear Log............................................................................................................................................. 26
Chapter 6 Maintenance.................................................................................................................................... 27
6.1 Version Information............................................................................................................................. 27
6.2 System Upgrade .................................................................................................................................. 27
6.3 Disk Management ............................................................................................................................... 28
6.4 Password Management ....................................................................................................................... 28
6.5 Time Management.............................................................................................................................. 29
6.5.1 Synchronize Time Manually....................................................................................................... 29
6.5.2 Synchronize Time by NTP .......................................................................................................... 30
6.6 Default Settings................................................................................................................................... 31

ICVS User Manual
2
User Manual
COPYRIGHT © 2018 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries
(hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be
“the Manual”) cannot be reproduced, changed, translated, or distributed, partially or
wholly, by any means, without the prior written permission of Hikvision. Unless
otherwise stipulated, Hikvision does not make any warranties, guarantees or
representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to ICVS.
The Manual includes instructions for using and managing the product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please find the latest
version in the company website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of
Hikvision in various jurisdictions. Other trademarks and logos mentioned below are
the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”,
WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF
THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES,
OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL
BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES
FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING
FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT
IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN
YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT
YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN
THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

ICVS User Manual
3
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE
LAW, THE LATER PREVAILS.

ICVS User Manual
4
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
FCC compliance: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the
interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked
with "CE" and comply therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU,
the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For
proper recycling, return this product to your local supplier upon the
purchase of equivalent new equipment, or dispose of it at designated collection
points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot
be disposed of as unsorted municipal waste in the European Union. See the
product documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate cadmium (Cd), lead
(Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance

ICVS User Manual
5
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided,
will result in death or serious injury.

ICVS User Manual
6
Safety Instructions
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
In the use of the product, you must be in strict compliance with the electrical
safety regulations of the nation and region. Please refer to technical
specifications for detailed information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the
Limited Power Source with 100~240 VAC or 12 VDC according to the IEC60950-1
standard. Please refer to technical specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may
cause over-heating or a fire hazard.
Please make sure that the plug is firmly connected to the power socket.
If smoke, odor or noise rise from the device, turn off the power at once and
unplug the power cable, and then please contact the service center.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
Ensure unit is installed in a well-ventilated, dust-free environment.
Unit is designed for indoor use only.
Keep all liquids away from the device.
Ensure environmental conditions meet factory specifications.
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit
as a result of dropping it may cause damage to the sensitive electronics within
the unit.
Use the device in conjunction with an UPS if possible.
Power down the unit before connecting and disconnecting accessories and
peripherals.
A factory recommended HDD should be used for this device.
Improper use or replacement of the battery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used batteries
according to the instructions provided by the battery manufacturer.

ICVS User Manual
7
Chapter 1 Login and Activation
1.1 Login
Purpose:
You can get access to the device via web browser. The recommended web browser
includes Internet Explorer 8 to 11.
Before you start:
Use a network cable to connect Ethernet port of your computer and the
Management LAN of the device.
Configure your computer IP address. Ensure it is in the same network segment
with the Management LAN of the device (the default IP address of Management
LAN is 10.254.254.254).
Step 1 Enter the device IP address (https://IP Address:2004) in web browser.
Step 2 Press Enter. Then login interface appears.
Figure 1-1 Login
Step 3 Enter User Name and Password.
Step 4 Click Login.
1.2 Device Activation
Purpose:
For the first-time access, you need to activate the device by setting an admin
password. No operation is allowed before activation.

ICVS User Manual
8
Step 1 Access device via web browser.
Step 2 Enter the same password in Create New Password and Confirm New
Password.
Figure 1-2 Activation
Step 3 Click OK.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong
password of your own choosing (Using a minimum of 8 characters, including at least
three of the following categories: upper case letters, lower case letters, numbers, and
special characters.) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.

ICVS User Manual
9
Chapter 2 Shortcut
The bar on top right corner of device webpage shows the shortcut buttons for quick
configuration.
Figure 2-1 Shortcut
: Mute alarm sound for alarm events. Only valid for current alarm events.
: Show the exception alarm information. You can search alarm information
by specifying alarm level, computing, and keyword.
Figure 2-2 Alarm Center
: View quick start guide, user manual, and download Command Line Tool.
: Change admin password.

ICVS User Manual
10
Figure 2-3 Change Password
: Log out system. At next login, you will automatically enter the page of
last login.

ICVS User Manual
11
Chapter 3 Overview
3.1 System Performance
3.1.1 View Performance
Go to Overview to view system performance.
Figure 3-1 System Performance
Table 3-1 Performance Description
Status
Description
Writing/reading performance
Shows the time, network bandwidth, IOPS, and writing/reading
size.
You can set the Performance Refresh Frequency and Computing Unit (only available
for dual-controller device) to filter performance to show.
3.1.2 View CPU and Memory Usage
Purpose:
You can view the CPU and memory usage, number of cores, and total memory.
Step 1 Go to Overview.
Step 2 Select CPU or Memory to view.

ICVS User Manual
12
Figure 3-2 View CPU and Memory Performance

ICVS User Manual
13
Chapter 4 Device
4.1 Node Tree
4.1.1 View Node Tree
Step 1 Go to Device.
Step 2 Click of node tree dropdown list.
Step 3 Click to show device name.
Figure 4-1 Node Tree
4.1.2 Map
Step 1 Go to Device.
Step 2 Click a node in node tree to refresh the topological graph of network switch
node and the topological graph of specified device.
Figure 4-2 Node Mapping
4.2 Node Status
Step 1 Go to Device.
Step 2 Position the mouse on a node to show node status, including Device Name,
Device Status, Serial No., and Product Model.

ICVS User Manual
14
Figure 4-3 Node Status
4.3 Device Overview
Purpose:
Go to Device and click Device Overview to view device name, IP address, port, status,
etc.
Figure 4-4 Device Overview
4.3.2 Locate Device
Purpose:
To find a device, turn on FN indicator on its front panel.
Step 1 Check the device.
Step 2 Click Device Location. FN indicator of the selected device will keep flashing for
10 minutes.

ICVS User Manual
15
4.3.3 Mute Device
Purpose:
Turn off alarm sound of a device.
Step 1 Check the device.
Step 2 Click Mute Device. Device alarm sound will be turned off.
4.3.4 Reboot and Shut down Device
Purpose:
Restart or shut down a device.
Step 1 Check the device.
Step 2 Click More Operations.
Step 3 Select Device Restart or Device Shutdown.
Step 4 Enter Password and Verification Code to confirm the operation.
4.3.5 More Operations
Rename a device .For details, refer to Rename Device.
Modify device network parameters. For details, refer to View Environment and
Control Information.
Modify HDD property. For details, refer to Manage Disk.
4.4 Device Graph of a Node
The bottom half of the Device page shows the device graph, device name, and device
indicators.
Figure 4-5 Device Graph
4.4.1 Device Indicator
Purpose:
Device indicator includes status indicator and HDD indicator.

ICVS User Manual
16
Figure 4-6 Status Indicator
Table 4-1 Indicator Description
No.
Description
Power indicator
Yellow: Default.
Grey: Device is powered off or shut down.
FN indicator
Blue.
Fault indicator
Red: Device is abnormal.
Figure 4-7 HDD Indicator
Table 4-2 Indicator Description
No.
Description
Normal
Blue: HDD detection is normal.
Warning
Red: HDD is not available instantly after HDD
detection. Only after repair can you decide if the HDD
is normal or not.
Handling
Light blue: HDD is being detected or located.
Unavailable
Grey: HDD detection fails and HDD cannot be repaired.
4.4.2 HDD Slot Graph
Purpose:
HDD slot graph shows the HDD working status.
Figure 4-8 HDD Slot Graph
Step 1 Go to Device.
Step 2 Click an HDD slot. Then the disk information window will pop up.

ICVS User Manual
17
Figure 4-9 Disk Information
S.M.A.R.T.: Click it to show HDD S.M.A.R.T. information.
Figure 4-10 S.M.A.R.T. Information
Locate: Click it to turn on FN indicator of the selected HDD. The indicator will
keep flashing (default flashing time is 600 seconds).
4.4.3 Information Overview
Purpose:
View environment and control information, manage disks, mute device, etc.
View Environment and Control Information
Step 1 Go to Device.
Step 2 Click Information Overview.

ICVS User Manual
18
Step 3 View environment and control information.
Temperature: Temperature of backboard, HBA card, CPU, etc.
Fan: Working status of chassis fan, backboard fan, and power fan.
Power: Power module working status.
Figure 4-11 Information Overview
Manage Disk
Purpose:
You can search the information of all the HDDs in storage device.
Step 1 Go to Device.
Step 2 Click Information Overview.
Step 3 Click Disk Management.

ICVS User Manual
19
Figure 4-12 Disk Management
Step 4 Specify search conditions.
Usage:
Unused: Disk not used by any RAID domain.
Single Disk Mode: Reserved.
When disk Usage is set as Unused, Status description is shown as follows:
Normal: Disk is normal in all online nodes.
Warning: Disk is normal in some online nodes. Or bad sector exists in the
disk.
Unavailable: Disk is abnormal in all the online nodes. Disk will be removed
from resource pool.
Processing: Disk is being detected, located, repaired, moved, or maintained.
Step 5 Click Search.
When disk status is warning, unavailable, or processing, click the status in
status column to show help. You can follow the help to recover disk.
Step 6 Optionally, to locate a disk, check the disk and click Locate to turn on FN
indicator of the disk. FN indicator will keep flashing (default flashing time is 600
seconds).
Step 7 Optionally, to detect a disk, check the disk and click Quick Detection. Detection
progress will be shown in Status column.