HIK VISION DS-2CC5112P(N) User manual

Day/ Night Dome Camera
User Manual
V 1.0.1
Hikvision Digital Technology Co., Ltd.
http://www.hikvision.com

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
1
Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate
to contact the dealer.
This manual applies toDS-2CC5102P(N), DS-2CC5112P(N), DS-2CC5132P(N), DS-2CC5172P(N),
DS-2CC5182P(N), DS-2CC5192P(N),DS-2CC51A2P(N) dome Camera.
This manual may contain several technical incorrect places or printing errors, and the content is
subject to change without notice. The updates will be added to the new version of this manual. We
will readily improve or update the products or procedures described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the security
or signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as
outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification does not cover the performance
or reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS,
WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY
OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
2
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the limits for a digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC.
2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of
as unsorted municipal waste in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information see:
www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For
more information see: www.recyclethis.info.

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
3
Safety Warnings and Cautions
Please pay attention to the following warnings and cautions:
Hazardous Voltage may be present: Special measures and precautions must be
taken when using this device. Some potentials (voltages) on the device may
present a hazard to the user. This device should only be used by Employees from
our company with knowledge and training in working with these types of devices
that contain live circuits.
Power Supply Hazardous Voltage: AC mains voltages are present within the power supply assembly.
This device must be connected to a UL approved, completely enclosed power supply, of the proper
rated voltage and current. No user serviceable parts inside the power supply.
System Grounding (Earthing): To avoid shock, ensure that all AC wiring is not exposed and that the earth
grounding is maintained. Ensure that any equipment to which this device will be attached is also connected
to properly wired grounded receptacles and are approved medical devices.
Power Connect and Disconnect: The AC power supply cord is the main disconnect
device to mains (AC power).The socket outlet shall be installed near the equipment
and shall be readily accessible.
Installation and Maintenance: Do not connect/disconnect any cables to or
perform installation/maintenance on this device during an electrical storm.

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
4
Power Cord Requirements: The connector that plugs into the wall outlet must be a grounding-type
male plug designed for use in your region. It must have certification marks showing certification by
an agency in your region. The connector that plugs into the AC receptacle on the power supply must
be an IEC 320, sheet C13, female connector. See the following website for more information
http://kropla.com/electric2.htm.
Lithium Battery: This device contains a Lithium Battery. There is a risk of
explosion if the battery is replaced by an incorrect type. Dispose of used
batteries according to the vendor’s instructions and in accordance with local
environmental regulations.
Perchlorate Material: Special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate. This notice is required by California Code of
Regulations, Title 22, Division 4.5, Chapter 33: Best Management Practices for Perchlorate Materials.
This device includes a battery which contains perchlorate material.
Taiwan battery recycling:
Please recycle batteries.
Thermal and Mechanical Injury: Some components such as heat sinks, power
regulators, and processors may be hot; care should be taken to avoid contact
with these components.
Electro Magnetic Interference: This equipment has not been tested for
compliance with emissions limits of FCC and similar international regulations. This device is not, and
may not be, offered for sale or lease, or sold, or leased until authorization from the United States
FCC or its equivalent in other countries has been obtained. Use of this equipment in a residential
location is prohibited. This equipment generates, uses and can radiate radio frequency energy which
may result in harmful interference to radio communications. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment on
and off, the user is required to take measures to eliminate the interference or discontinue the use of
this equipment.
Lead Content:
Please recycle this device in a responsible manner. Refer to local
environmental regulations for proper recycling; do not dispose of device in
unsorted municipal waste.

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
5
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or
property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these
precautions to prevent
potential injury or material
damage.
Warnings
1. In the use of the product, you must be in strict compliance with the electrical safety regulations
of the nation and region.
2. Input voltage should meet both the SELV(Safety Extra Low Voltage) and the Limited Power
Source with AC 24V or DC 12V according to the IEC60950-1 standard. Please refer to technical
specifications for detailed information.
3. Do not connect several devices to one power adapter as adapter overload may cause
over-heating or a fire hazard.
4. Please make sure that the plug is firmly connected to the power socket.
5. When the product is mounted on wall or ceiling, the device shall be firmly fixed.
6. If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
7. If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
6
Cautions
1. Make sure the power supply voltage is correct before using the camera.
2. Do not drop the camera or subject it to physical shock.
3. Do not touch CCD (Charge Coupled Device) modules with fingers. If cleaning is necessary, use
clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an
extended period, please replace the lens cap to protect the CCD from dirt.
4. Do not aim the camera at the sun or extra bright places. Blooming or smearing may occur
otherwise (which is not a malfunction), and affect the endurance of CCD at the same time.
5. The CCD may be burned out by a laser beam, so when any laser equipment is in using, make
sure that the surface of CCD will not be exposed to the laser beam.
6. Do not place the camera in extremely hot, cold(the operating temperature shall be-10℃
~+60℃), dusty or damp locations, and do not expose it to high electromagnetic radiation.
7. To avoid heat accumulation, good ventilation is required for operating environment.
8. Keep the camera away from liquid while in use.
9. While in delivery, the camera shall be packed in its original packing, or packing of the same
texture.
10. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment shall be
replaced regularly according to their average enduring time. The average time varies because of
differences between operating environment and using history, so regular checking is
recommended for all the users. Please contact with your dealer for more details.
11. Improper use or replacement of the battery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used batteries according to the instructions provided
by the battery manufacturer.

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
7
Table of Contents
Chapter 1 Introduction...........................................................................................................................8
1.1 Features ........................................................................................................................................8
1.2 Functions ......................................................................................................................................8
1.3 Description of Dome Camera .......................................................................................................9
Chapter 2 Installation...........................................................................................................................10
2.1 Dome Camera Mounting ............................................................................................................10
2.2 Dome Electrical Box Adapter Installation...................................................................................12
Appendix ..............................................................................................................................................14
DS-2CC5102P(N) ...............................................................................................................................14
Specifications ................................................................................................................................14
Dimensions....................................................................................................................................15
DS-2CC5112P(N) ...............................................................................................................................16
Specification..................................................................................................................................16
Dimensions....................................................................................................................................17
DS-2CC5132P(N) ...............................................................................................................................18
Specification..................................................................................................................................18
Dimensions....................................................................................................................................19
DS-2CC5172P(N) ...............................................................................................................................20
Specifications ................................................................................................................................20
Dimensions....................................................................................................................................21
DS-2CC5182P(N) ...............................................................................................................................22
Specifications ................................................................................................................................22
Dimensions....................................................................................................................................23
DS-2CC5192P(N) ...............................................................................................................................24
Specifications ................................................................................................................................24
Dimensions....................................................................................................................................25
DS-2CC51A2P(N)...............................................................................................................................26
Specifications ................................................................................................................................26
Dimensions....................................................................................................................................27

User Manual of Dome Camera
8
Chapter 1 Introduction
1.1 Features
This series of the camera adopt high performance sensor and advanced print circuit
board design technology with high resolution, low distortion and low noise, etc. The
key features as following:
• High performance image sensor, high resolution, capable of providing clear images.
• Low illumination, DAY/NIGHT auto switch.
•Backlight compensation
•Auto white balance
• Auto electronic shutter control, adaptive to different environments.
• Auto gain control, with brightness adaptive.
•3-Axis adjustment.
• Advanced technique design, with high reliability.
1.2 Functions
DAY/NIGHT ATUO Switch: The camera provides two operation modes: color, and
B&W. You can increase sensitivity in low light conditions by switching to B&W mode.
Color mode is preferred in normal lighting conditions.
AGC: AGC allows users to adjust the gain of amplifier, enabling the camera to output
the standard video signal in different lighting conditions. As scene lighting decreases,
the system will automatically adjust, adding a mixture of AGC and slow shutter
according to the AGC limit setting. In low illumination, AGC will increase camera’s
sensitivity, and output bright and clear video.
S/N ratio: It refers to the ratio between signal voltage and noise voltage. While the
ratio is larger, the effect of noise is less, and the image is more spotless.
White Balance: This feature automatically processes the viewed image to retain color

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
9
balance over a color temperature range.
1.3 Description of Dome Camera
Figure 1.1

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
10
Chapter 2 Installation
Prior to mounting, please make sure that the device in the package is in good
condition and all the assembly parts are complete.
2.1 Dome Camera Mounting
The following section has described the DS-2CC5102P(N), DS-2CC5112P(N),
DS-2CC5132P(N),DS-2CC5172P(N),DS-2CC5182P(N),DS-2CC5192P(N),DS-2CC51A2P(N)
series dome camera installation as the example.
Note: the mounting wall must be with certain thickness and capable of supporting
three times the weight of dome camera.
1. Use your hands to hold the back box of dome camera and then rotate the
bubble in anti-clockwise direction to remove it.
Figure 2.1.1 Remove the Bubble
2. By referring to the Figure 2.1.2, use the self-tapping screws to secure the
back box of dome camera to the wall.
Note: the expansion screws are required for the cement wall mounting
application.

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
11
Figure 2.1.2 Secure Back Box to the Wall
3. Adjust the lens to the desired monitoring location and obtain the clear
images. This series dome camera has the pan movement range of 0~355°,
the tilt movement range of 0~90°and the rotate movement range of 0~355°.
Figure 2.1.3 Adjust Lens Orientation
4. Rotate the bubble in clockwise direction to replace it to the dome camera.

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
12
Figure 2.1.4 Replace the Bubble
Figure 2.1.5 accomplished
2.2 Dome Electrical Box Adapter Installation
The following section has described the DS-2CC5102P(N),DS-2CC5112P(N),
DS-2CC5132P(N),DS-2CC5172P(N),DS-2CC5182P(N),DS-2CC5192P(N),DS-2CC5192P(N)
series dome camera installation as the example.

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
13
1. Attach DS-1244ZJ to Electrical Box Adapter as shown in Figure 2.2.1
Figure 2.2.1
2. Attach Dome to DS-1244ZJ as shown in Figure 2.2.2,Please reference Dome
Camera Mounting if needed.
Figure 2.2.2

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
14
Appendix
DS-2CC5102P(N)
Specifications
Model
Parameter
DS-2CC5102P(N)
420 TVL CCD Dome Camera
Camera
Image Sensor
1/3” SONY Super HAD CCD II
Signal System
PAL/NTSC
Effective Pixels
PAL: 500 (H) × 582 (V)
NTSC: 510 (H) × 492 (V)
Min. Illumination
0.1 Lux @ (F1.2, AGC ON)
0.28 Lux @ (F2.0, AGC ON)
Shutter Time
PAL: 1/50 s to 1/100,000 s
NTSC: 1/60 s to 1/100,000 s
Lens
3.6 mm @ F2.0 (2.8 mm, 6 mm, 8 mm, 12 mm, 16 mm
optional)
Angle of view: 78°(3.6 mm)
Lens Mount
M12
Angle Adjustment
Pan: 0 - 355°, Tilt: 0 - 90°, Rotation: 0 - 355°
Day & Night
Electronic
Horizontal Resolution
420 TVL
Synchronization
Internal synchronization
Video Output
1Vp-p composite output (75 Ω/BNC);
Test monitor out [1Vp-p composite output (75 Ω/BNC),
device line]
S/N Ratio
More than 50 dB
General
Operating Conditions
-10 °C - 60 °C (14 °F - 140 °F)
Humidity 90% or less (non-condensing)
Power Supply
12 V DC ± 10%
Power Consumption
Max. 2 W
Dimension
Φ 97.8 x 64.4 mm (φ 3.85” x 2.54”)
Weight
300 g (0.66 lbs)

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
15
Dimensions
Unit: mm

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
16
DS-2CC5112P(N)
Specification
Model
Parameter
DS-2CC5112P(N)
480 TVL CCD Dome Camera
Camera
Image Sensor
1/3” SONY Super HAD CCD II
Signal System
PAL/NTSC
Effective Pixels
PAL: 752 (H) × 582 (V)
NTSC: 768 (H) × 494 (V)
Min. Illumination
0.1 Lux @ (F1.2, AGC ON)
0.28 Lux @ (F2.0, AGC ON)
Shutter Time
PAL: 1/50 s to 1/100,000 s
NTSC: 1/60 s to 1/100,000 s
Lens
3.6 mm @ F2.0 (2.8 mm, 6 mm, 8 mm, 12 mm, 16 mm
optional)
Angle of view: 78°(3.6 mm)
Lens Mount
M12
Angle Adjustment
Pan: 0 - 355°, Tilt: 0 - 90°, Rotation: 0 - 355°
Day & Night
Electronic
Horizontal Resolution
480 TVL
Synchronization
Internal synchronization
Video Output
1Vp-p composite output (75 Ω/BNC);
Test monitor out [1Vp-p composite output (75 Ω/BNC),
device line]
S/N Ratio
More than 52 dB
General
Operating Conditions
-10 °C - 60 °C (14 °F - 140 °F)
Humidity 90% or less (non-condensing)
Power Supply
12 V DC ± 10%
Power Consumption
Max. 2 W
Dimension
Φ 97.8 x 64.4 mm (φ 3.85” x 2.54”)
Weight
300 g (0.66 lbs)

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
17
Dimensions
Unit: mm

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
18
DS-2CC5132P(N)
Specification
Model
Parameter
DS-2CC5132P(N)
500 TVL DIS Dome Camera
Camera
Image Sensor
1/4” DIS
Signal System
PAL/NTSC
Effective Pixels
640 (H) × 480 (V)
Min. Illumination
0.1 Lux @ (F1.2, AGC ON)
0.28 Lux @ (F2.0, AGC ON)
Shutter Time
PAL: 1/25 s to 1/15,000 s
NTSC: 1/30 s to 1/15,000 s
Lens
3.6 mm @ F2.0 (2.8 mm, 6 mm, 8 mm, 12 mm, 16 mm
optional)
Angle of view: 54°(3.6 mm)
Lens Mount
M12
Angle Adjustment
Pan: 0 - 355°, Tilt: 0 - 90°, Rotation: 0 - 355°
Day & Night
Electronic
Horizontal Resolution
500 TVL
Synchronization
Internal synchronization
Video Output
1Vp-p composite output (75 Ω/BNC);
S/N Ratio
More than 52 dB
General
Operating Conditions
-40 °C - 70 °C (-40 °F - 158 °F)
Humidity 90% or less (non-condensing)
Power Supply
12 V DC ± 10%
Power Consumption
Max. 1 W
Dimension
Φ 97.8 x 64.4 mm (φ 3.85” x 2.54”)
Weight
300 g (0.66 lbs)

User Manual of Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
19
Dimensions
Unit: mm