HIK VISION DS-2CD7133-E User manual

Network Mini Dome Camera
Installation Manual
V3.0.0
Hangzhou Hikvision Digital Technology Co., Ltd.
http://www.hikvision.com
2010-04

Thank you for purchasing our product. If there are any questions, or requests,
please do not hesitate to contact the dealer.
This manual applies to DS-2CD7133-E and DS-2CD7153-E Network Camera.
This manual may contain several technical incorrect places or printing errors,
and the content is subject to change without notice. The updates will be added
to the new version of this manual. We will readily improve or update the
products or procedures described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or
reliability of the security or signaling aspects of this product. UL has only
tested for fire, shock or casualty hazards as outlined in UL’s Standard(s) for
Safety, UL60950-1. UL Certification does not cover the performance or
reliability of the security or signaling aspects of this product. UL MAKES NO
REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER
REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

Installation Manual of Network Mini Dome Camera
1
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid
danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
1. In the use of the product, you must strictly comply with the electrical safety regulations
of the nation and region.
2. Source with DC 12V according to the IEC60950-1 standard. Please refer to technical
specifications for more details.
3. Do not connect several devices to one power adapter as an adapter overload may cause
over-heating and can be a fire hazard.If use the POE as the power supply, please make
sure that the POE Switch have the sufficient power.
4. Please make sure that the plug is firmly inserted into the power socket.
5. When the product is installed on a wall or ceiling, the device should be firmly fixed.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera
2
6. If smoke, odor, or noise rise from the device, turn off the power at once and unplug the
power cable, then contact the service center.
7. If the product does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera
3
Notice:
1. Make sure the power supply voltage is correct before using the camera.
2. Do not drop the camera or subject it to physical shock.
3. Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with
a bit of ethanol and wipe it gently. If the camera will not be used for an extended period
of time, put on the lens cap to protect the sensor from dirt.
4. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of sensor at
the same time.
5. The sensor may be burned out by a laser beam, so when any laser equipment is being
used, make sure that the surface of the sensor will not be exposed to the laser beam.
6. Do not place the camera in extremely hot or cold temperatures (the operating
temperature should be between -10°C ~ 60°C, dusty or damp locations, and do not
expose it to high electromagnetic radiation.
7. To avoid heat accumulation, good ventilation is required for a proper operating
environment.
8. While shipping, the camera should be packed in its original packing, or packing of the
same texture.
9. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment
should be replaced regularly according to their average life time. The average time varies
because of differences between operating environment and usage history, so regular
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera
4
checking is recommended for all users. Please contact with your dealer for more details.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
5
Table of Contents
Chapter 1 Introduction..............................................................................................................1
1.1 Network camera Functions and Features .............................................................1
1.2 Applications .....................................................................................................................2
Chapter 2 Installation.................................................................................................................3
2.1 Camera Description ......................................................................................................3
2.1.1 Camera Physical Description...........................................................................4
2.1.2 Camera Connection............................................................................................5
2.2 Hardware Installation ...................................................................................................6
Appendix Product Specification.......................................................................................... 10
DS-2CD7133-E .................................................................................................................... 10
Specification ................................................................................................................. 10
Dimensions.................................................................................................................... 11
DS-2CD7153-E .................................................................................................................... 12
Specification ................................................................................................................. 12
Dimensions.................................................................................................................... 13

Installation Manual of Network Mini Dome Camera
1
Chapter 1 Introduction
Network camera is a kind of embedded digital surveillance product that combines the
features of both traditional analog camera and network DVS (Digital Video Server). Due to
the embedded Linux operation system and the latest Davinci hardware platform of TI, the
system operates with high scheduling efficiency. Furthermore, the firmware is burned in the
flash, which makes the product small, reliable and highly stable.
1.1 Network camera Functions and Features
Functions:
Network Function: Support the TCP/IP protocols and IE browsing.
Heartbeat Function: The server can acquire real time operating performance of the
network camera through the heartbeat function.
Alarm Function: Supports Motion Detection.
User Management: Support multilevel right management. The administrator can create
up to 15 separate users with different right levels, which highly improves the system
security.
Compression Functions:
Support 1 channel video signal and standard H.264 video encoding compression, which
supports both variable bit rate and variable frame rate; besides, you can self-define both
the video quality and its compressed bit rate.
Remote Control:
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera
2
The product offers a 10M/100M self-adaptive Ethernet interface.
Support TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP protocols.
Set the parameters, browse real time videos or check the camera performance through
software or IE, and store the compressed bit rate through network.
Support remote upgrades and maintenance.
1.2 Applications
This camera is ideal for remote control network applications. E.g.:
1. Network surveillance for supermarkets and factories.
2. Remote surveillance for homes and offices.
3. Indoor monitoring scenes, such as hotel, corridor, stairway.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera
3
Chapter 2 Installation
NOTE:
1. Please check if all the items on the package list have been included with your
camera.
2. Read the following contents carefully before the installation.
3. Make sure that all the related equipment is power-off during the installation.
4. Check the power supply to prevent any damage caused by mismatching problems.
5. If the product does not operate properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. Users are
responsible for any problem caused by modification or repairing without
authorization.
2.1 Camera Description
NOTE: The camera supports PoE power supply.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera
4
2.1.1 Camera Physical Description
Serial NO. Description
1 Back box
2 Lens
3 P: Power LED indicator, which turns red when power is applied to the unit.
4 Bottom board
5 Bottom board set screw hole
6 Lens set screw
7 S & L: Network status LED indicator.
When the network is connected, the “S” LED turns orange, while the “L” LED flickers in
green.
8 RESET: Reset all paramaters to factory default settings.
NOTE:
When the camera is power up, press the “RESET” button for about 10 seconds, then all parameters,
including user name, password, IP address, port number, etc., will be reset to the factory default
settings.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera
5
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
2.1.2 Camera Connection
Step1:
Connect one end of the network
cable to the camera and the
other end to PC.
Step2:
Connect one end of the power

Installation Manual of Network Mini Dome Camera
6
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
2.2 Hardware Installation
The ceiling mount is a suitable installation method for this camera. Please stick to the
following
steps:
1. Loosen the set screws with a hexagonal screw driver (attached with the camera), and take
down the back box shown as below:
Fig. 2.2.1 Remove the back box
2. Use the screws to fix the bottom board on the ceiling.
NOTE:
If required, user can apply the pliers
to remove the clip (refer to the part
marked in dotted line) on the side of
the back box and then feed cables
through the opening to secure on
the ceiling.

Installation Manual of Network Mini Dome Camera
7
Fig. 2.2.2 Fix the bottom board
3. While viewing the video on the computer, adjust the camera’s view angle for your need.
Loosen the lens set screws Insert the hexagonal screw driver into the hole
marked in the picture , and then adjust
horizontally and vertically the camera’s pan
and tilt by turning the hexagonal screw
driver
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera
8
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
Tighten the lens set screws
4. Install the back box, and tighten the set screws.
Fig.2.2.3 Install the back box
NOTE：
As the lens of camera has
already been factory
adjusted to the best
imaging effect, thus it
only needs to adjust the
pan and tilt view angle.
If the image is not clear
without the back box,
please don’t worry, the
back box will affect the
imaging effect, so when
you test the imaging
effect of lens, the back
box must be installed to
the camera

Installation Manual of Network Mini Dome Camera
9
Fig.2.2.4 Done
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera
10
Appendix Product Specification
DS-2CD7133-E
Specification
DS-2CD7133-E
Model
Parameter VGA 1/4” CMOS Day&Night Weather-proof Vandal-proof Network
Mini Dome Camera
Camera
Image Sensor 1/4” Progressive Scan CMOS
Min. Illumination 0.4 Lux @(F1.2, AGC ON)
0.9Lux @(F1.8, AGC ON)
Electronic
Shutter 1/25s ~1/100,000s
[email protected] (2.8mm, 6mm, 8mm optional)
Lens Angle of view: 71°(4mm)
Lens Mount M12
Adjustment
Range Pan±15°, Tilt0 ~90°, Rotation±15°
Day&Night Electronic
Compression Standard
Video
Compression H.264/MJpeg
Bit rate 32 Kbps~8Mbps
Audio
Compression G.711(G.722.1 optional)
Image
Max. Image
Resolution 640×480
Frame Rate 50HZ: 25fps (640×480)
60HZ: 30fps (640×480)
Image Settings Saturation, Brightness, Contrast adjustable through client software or
web browser
Network
Storage Support NAS ( ISCSI optional)
Intelligent Alarm Motion Detection
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera
11
Protocols TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP
(SNMP, HTTPS, FTP, SIP, SRTP, 802.1x, IPV6 optional )
Basic Initial Set Button, Anti-flicker, Dual Stream, Heartbeat, Password
Protection, Watermark
Interface
Communication
Interface 1RJ45 10M / 100M self-adaptive Ethernet interface
General
Operating
Condition -10°C~60°C(14°F~140°F), Humidity 90% or less(non-condensing)
Power Supply DC12V±10% / PoE
Power
Consumption 4W MAX
Impact
Protection IEC60068-2-75Eh,50J;EN50102, IK10
Weather Proof IP66
Dimensions(mm) 100×97.5×46.5(3.94”X3.84”X1.83”)
Weight 250g(0.55lbs)
Dimensions
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera
12
DS-2CD7153-E
Specification
DS-2CD7153-E
Model
Parameter 2 Megapixel 1/3” CMOS Day&Night Weather-proof Vandal-Proof
Network Mini Dome Camera
Camera
Image Sensor 1/3” Progressive Scan CMOS
Min. Illumination 0.5Lux @(F1.2, AGC ON), 0.1Lux @(F1.2, AGC ON, Sense-up×5)
1.1Lux @(F1.8, AGC ON), 0.2Lux @(F1.8, AGC ON, Sense-up×5)
Electronic
Shutter 1/25s ~1/100,000s
[email protected] (2.8mm, 6mm, 8mm optional)
Lens Angle of view: 55°(4mm)
Lens Mount M12
Adjustment
Range Pan±15°, Tilt0 ~90°, Rotation±15°
Day&Night Electronic
Compression Standard
Video
Compression H.264/MJpeg
Bit rate 32 Kbps~16Mbps
Audio
Compression G.711(G.722.1 optional)
Image
Max. Image
Resolution 1600 x 1200
Frame Rate
50HZ:12.5fps (1600 x 1200), 12.5fps (1600 x 912), 25fps (1280×960),
25fps (1280 x 720)
60HZ:15fps (1600 x 1200), 15fps (1600 x912), 25fps (1280×960), 30fps
(1280 x 720)
Image Settings Saturation, Brightness, Contrast adjustable through client software or
web browser
Network
Storage Support NAS ( ISCSI optional)
Intelligent Alarm Motion Detection
Protocols TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP
(SNMP, HTTPS, FTP, SIP, SRTP, 802.1x, IPV6 optional )
Basic e-PTZ, Initial Set button, Anti-flicker, Dual Stream, Heartbeat, Password
Protection, Watermark
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Mini Dome Camera
13
Interface
Communication
Interface 1 RJ45 10M / 100M self-adaptive Ethernet interface
General
Operating
Condition -10°C~60°C(14°F~140°F), Humidity 90% or less(non-condensing)
Power Supply DC12V±10% / PoE
Power
Consumption 4W MAX
Impact
Protection IEC60068-2-75Eh,50J;EN50102, IK10
Weather Proof IP66
Dimensions(mm) 100×97.5×46.5(3.94”X3.84”X1.83”)
Weight 250g(0.55lbs)
Dimensions
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©