HIK VISION DS-2CC52C1S-VPIR User manual

0
Camera
User Manual
720P SDI Camera
UD.6L0201D1327A01

720P SDI Camera·User Manual
1
1
Thank you for purchasing our product. If there are any questions, or
requests, please do not hesitate to contact the dealer.
This manual applies to the model as follows:
Type
Model
Dome Camera
DS-2CC52C1S-VPIR
Type I Turret Camera
DS-2CC52C2S-IRM
Type II Turret Camera
DS-2CC52C2S-IT3P
Type I Bullet Camera
DS-2CC12C2S-IR
Type II Bullet Camera
DS-2CC12C2S-IT5
Type III Bullet Camera
DS-2CC12C2S-IT3
This manual may contain several technical incorrect places or printing
errors, and the content is subject to change without notice. The
updates will be added to the new version of this manual. We will
readily improve or update the products or procedures described in
the manual.
DISCLAIMER STATEMENT
Underwriters Laboratories Inc. (“UL”) has not tested the
performance or reliability of the security or signaling aspects of this
product. UL has only tested for fire, shock or casualty hazards as
outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification
does not cover the performance or reliability of the security or
signaling aspects of this product. UL MAKES NO REPRESENTATIONS,
WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE

720P SDI Camera·User Manual
2
2
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING
RELATED FUNCTIONS OF THIS PRODUCT.
0100001031213

720P SDI Camera·User Manual
3
3
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to
comply with the limits for a digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the users will be required to correct the interference at their
own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized European
standards listed under the Low Voltage Directive 2006/95/EC, the
EMC Directive 2004/108/EC, the RoHS Directive 2011/65/EU.
municipal waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of equivalent

720P SDI Camera·User Manual
4
4
2012/19/EU (WEEE directive): Products marked with
this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information, see:
www.recyclethis.info.
2006/66/EC (battery directive): This product contains
a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the
product documentation for specific battery
information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point. For more information,
see: www.recyclethis.info.

720P SDI Camera·User Manual
5
5
Safety Instruction
These instructions are intended to ensure that user can use the
product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings
are neglected.
Cautions: Injury or equipment damage may occur if any of the
cautions are neglected.
Warnings
In the use of the product, you must be in strict compliance with
the electrical safety regulations of the nation and region.
Please refer to technical specifications for detailed information.
Input voltage should meet both the SELV (Safety Extra Low Voltage)
and the Limited Power Source with AC 24V or DC 12V according to
Warnings Follow these
safeguards to prevent
serious injury or death.
Cautions Follow these
precautions to prevent
potential injury or material
damage.

720P SDI Camera·User Manual
6
6
the IEC60950-1 standard. Please refer to technical specifications
for detailed information.
Do not connect several devices to one power adapter as adapter
overload may cause over-heating or a fire hazard.
Please make sure that the plug is firmly connected to the power
socket.
When the product is mounted on wall or ceiling, the device shall
be firmly fixed.
If smoke, odor or noise rise from the device, turn off the power at
once and unplug the power cable, and then please contact the
service center.
If the product does not work properly, please contact your dealer
or the nearest service center. Never attempt to disassemble the
camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Cautions
Make sure the power supply voltage is correct before using the
camera.
Do not drop the camera or subject it to physical shock.
Do not touch senor modules with fingers. If cleaning is necessary,
use clean cloth with a bit of ethanol and wipe it gently. If the
camera will not be used for an extended period, please replace
the lens cap to protect the sensor from dirt.

720P SDI Camera·User Manual
7
7
Do not aim the camera at the sun or extra bright places. Blooming
or smearing may occur otherwise (which is not a malfunction),
and affect the endurance of sensor at the same time.
The sensor may be burned out by a laser beam, so when any laser
equipment is in using, make sure that the surface of sensor will
not be exposed to the laser beam.
Do not place the camera in extremely hot, cold (the operating
temperature shall be(-10℃~+60℃), dusty or damp locations, and
do not expose it to high electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for
operating environment.
Keep the camera away from liquid while in use.
While in delivery, the camera shall be packed in its original
packing, or packing of the same texture.
Improper use or replacement of the battery may result in hazard
of explosion. Replace with the same or equivalent type only.
Dispose of used batteries according to the instructions provided
by the battery manufacturer.

720P SDI Camera·User Manual
8
8
Table of Contents
1 Introduction.................................................................................. 10
1.1 Product Features ........................................................... 10
1.2 Overview....................................................................... 11
1.2.1 Overview of Dome Camera................................. 11
1.2.2 Overview of Turret Camera ................................ 12
Overview of Bullet Camera ................................. 141.2.3
2 Installation.................................................................................... 17
2.1 Installation of the Dome Camera................................... 18
2.2 Installation of Turret Camera......................................... 22
2.2.1 Type I Turret Camera Installation........................ 22
2.2.2 Type II Turret Camera Installation....................... 25
2.3 Installation of Bullet Camera ......................................... 28
1.1.2 Type I Bullet Camera Installation ........................ 28
1.1.3 Type II Bullet Camera Installatio ......................... 30
3 Menu Description ......................................................................... 33
3.1 EXPOSURE ..................................................................... 34
3.1.1 SHUTTER ............................................................ 34
3.1.2 AGC .................................................................... 34
3.1.3 BRIGHTNESS ....................................................... 35
3.2 White Balance (WB) ...................................................... 35
3.2.1 INDOOR.............................................................. 35
OUTDOOR .......................................................... 363.2.2
AUTO .................................................................. 363.2.3
USER................................................................... 363.2.4
3.3 Day & Night................................................................... 36
3.3.1 AUTO .................................................................. 37
COLOR ................................................................ 373.3.2

720P SDI Camera·User Manual
9
9
B/W .................................................................... 373.3.3
SMART................................................................ 383.3.4
3.4 IMAGE SETUP ................................................................ 38
3.4.1 BRIGHTNESS ....................................................... 39
3.4.2 CONTRAST.......................................................... 39
3.4.3 COLOR GAIN ....................................................... 39
SHARPNESS ........................................................ 403.4.4
NR ...................................................................... 403.4.5
MIRROR.............................................................. 403.4.6
LANGUAGE ......................................................... 403.4.7
FRAME RATE....................................................... 403.4.8
3.5 FUNC.SETUP.................................................................. 41
3.6 RESET ............................................................................ 41
3.7 SAVE & EXIT .................................................................. 41

720P SDI Camera·User Manual
10
10
1Introduction
1.1 Product Features
This series of camera adopts high-sensitive sensor and advanced
circuit board design technology. It features high resolution, low
distortion, and low noise features, etc., which make it extremely
suitable for surveillance system and image process system.
The main features of 720P SDI cameras are as follows:
1.3 Mega pixel high-performance CMOS sensor;
Clear and detailed image of up to 720P resolution;
Low illumination: 0.01Lux @ (F1.2,AGC ON), 0 Lux with IR;
IR cut filter with auto switch;
Auto white balance, auto gain control, backlight compensation,
and auto electronic shutter control for different surveillance
environment;
Advanced Engineering Design, High Reliability;
Ingress Protection: IP66.

720P SDI Camera·User Manual
11
11
1.2 Overview
1.2.1 Overview of Dome Camera
Overview of SDI Dome CameraFigure 1-1
Description of Dome CameraTable 1-1
No.
Description
No.
Description
1
Mounting Base
5
IR LED
2
Menu Button
6
Lens
3
Black Liner
7
Power Cable
4
Bubble
8
Video Output

720P SDI Camera·User Manual
12
12
1.2.2 Overview of Turret Camera
Overview of Type I Turret Camera
Overview of Type I Turret CameraFigure 1-2
Description of Type I Turret CameraTable 1-2
No.
Description
No.
Description
1
Enclosure
4
Power Cable
2
Mounting Base
5
Video Output Cable
3
Dome Drive

720P SDI Camera·User Manual
13
13
Overview of Type II Turret Camera
Overview of Type II Turret CameraFigure 1-3
Description of Type II Turret CameraTable 1-3
No.
Description
No.
Description
1
Trim Ring
4
Dome Drive
2
Enclosure
5
Video Output Cable
3
Mounting Base
6
Power Cable

720P SDI Camera·User Manual
14
14
1.2.3 Overview of Bullet Camera
Overview of Type I Bullet Camera
Overview of Type I Bullet CameraFigure 1-4
Description
Table 1-4
No.
Description
No.
Description
1
Mounting Base
5
Lens
2
Adjustable Nut
6
Video Output Cable
3
Sun Shield
7
Power Cable
4
IR LED

720P SDI Camera·User Manual
15
15
Overview of Type II Bullet Camera
Overview of Type II Bullet CameraFigure 1-5
DescriptionTable 1-5
No.
Description
No.
Description
1
Sun Shield
5
Power Cable
2
Lens
6
Video Output Cable
3
IR LED
7
Mounting Base
4
Adjustable Screw

720P SDI Camera·User Manual
16
16
Overview of Type III Bullet Camera
Overview of Type III Bullet CameraFigure 1-6
DescriptionTable 1-6
No.
Description
No.
Description
1
Sun Shield
5
Power Cable
2
Lens
6
Video Output Cable
3
IR LED
7
Mounting Base
4
Adjustable Screw

720P SDI Camera·User Manual
17
17
2Installation
Before you start:
Please make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off during the
installation.
Check the specification of the products for the installation
environment.
Check whether the power supply is matched with your AC outlet
to avoid damage.
Please make sure the wall is strong enough to withstand three
times the weight of the camera and the mounting.
If the wall is the cement wall, you need to insert expansion screws
before you install the camera. If the wall is the wooden wall, you
can use self-tapping screw to secure the camera.
If the product does not function properly, please contact your
dealer or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.
For the camera that supports IR, you are required to pay attention to
the following precautions to prevent IR reflection:
Dust or grease on the dome cover will cause IR reflection.
Please do not remove the dome cover film until the
installation is finished. If there is dust or grease on the dome

720P SDI Camera·User Manual
18
18
cover, clean the dome cover with clean soft cloth and
isopropyl alcohol.
Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back
into the lens causing reflection.
The foam ring around the lens must be seated flush against
the inner surface of the bubble to isolate the lens from the IR
LEDS. Fasten the dome cover to camera body so that the
foam ring and the dome cover are attached seamlessly.
2.1 Installation of the Dome Camera
Steps:
1. Drill the screw holes on the ceiling according to the drill
template.
Drill Template of Dome CameraFigure 2-1

720P SDI Camera·User Manual
19
19
2. Loosen the set screws with a hex key (supplied) to remove the
bubble.
Remove the BubbleFigure 2-2
3. Fix the mounting base on the ceiling with screws.
Fix the Mounting BaseFigure 2-3