HIK VISION DS-2CD1143G0-I User manual

Network Camera User Manual
0
User Manual
UD14456B
Network Camera
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Hikvision
DS-2CD1143G0-I o cerca il tuo prodotto tra le migliori offerte di Videosorveglianza

Network Camera User Manual
1
User Manual
COPYRIGHT ©2019 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries
(hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be
“the Manual”) cannot be reproduced, changed, translated, or distributed, partially or
wholly, by any means, without the prior written permission of Hikvision. Unless
otherwise stipulated, Hikvision does not make any warranties, guarantees or
representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to Network Camera.
The Manual includes instructions for using and managing the product. Pictures, charts,
images and all other information hereinafter are for description and explanation only.
The information contained in the Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the latest version in the company
website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision's trademarks and logos are the properties of
Hikvision in various jurisdictions. Other trademarks and logos mentioned below are
the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,

Network Camera User Manual
2
FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF
THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,
AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN
CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL
NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL
RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT
IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE
LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS
PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to
avoid danger or property loss.
Notice:
If camera fails to synchronize local time with that of the network, you need to set
up camera time manually. Visit the camera and enter system setting interface for
time setting.

Network Camera User Manual
3
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are
neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are
neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
Please adopt the power adapter which can meet the safety extra low voltage
(SELV) standard. And source with 12 VDC or 24 VAC (depending on models)
according to the IEC60950-1 and Limited Power Source standard.
To reduce the risk of fire or electrical shock, do not expose this product to rain or
moisture.
This installation should be made by a qualified service person and should conform
to all the local codes.
Please install blackouts equipment into the power supply circuit for convenient
supply interruption.
Please make sure that the ceiling can support more than 50(N) Newton gravities if
the camera is fixed to the ceiling.
If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Cautions:

Network Camera User Manual
4
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean
cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an
extended period of time, put on the lens cap to protect the sensor from dirt.
Do not aim the camera lens at the strong light such as sun or incandescent lamp.
The strong light can cause fatal damage to the camera.
The sensor may be burned out by a laser beam, so when any laser equipment is
being used, make sure that the surface of the sensor not be exposed to the laser
beam.
Do not place the camera in extremely hot, cold temperatures (refer to product
specification for working temperature), dusty or damp environment, and do not
expose it to high electromagnetic radiation.
To avoid heat accumulation, ensure there is good ventilation to the device.
Keep the camera away from water and any liquids.
While shipping, pack the camera in its original, or equivalent, packing materials.
Or packing the same texture.
Improper use or replacement of the battery may result in hazard of explosion.
Please use the manufacturer recommended battery type.
Notes:
For the camera supports IR, you are required to pay attention to the following
precautions to prevent IR reflection:
Dust or grease on the dome cover will cause IR reflection. Please do not remove
the dome cover film until the installation is finished. If there is dust or grease on
the dome cover, clean the dome cover with clean soft cloth and isopropyl alcohol.
Make certain the installation location does not have reflective surfaces of objects
too close to the camera. The IR light from the camera may reflect back into the
lens causing reflection.
The foam ring around the lens must be seated flush against the inner surface of
the bubble to isolate the lens from the IR LEDS. Fasten the dome cover to camera

Network Camera User Manual
5
body so that the foam ring and the dome cover are attached seamlessly.

Network Camera User Manual
6
Table of Contents
Chapter 1 System Requirement..............................................................................10
Chapter 2 Network Connection ..............................................................................11
2.1 Setting the Network Camera over the LAN...................................................... 11
2.1.1 Wiring over the LAN........................................................................................................11
2.1.2 Activating the Camera ....................................................................................................12
2.1.3 (Optional) Setting Security Question ..............................................................................19
2.2 Setting the Network Camera over the WAN .................................................... 19
Static IP Connection........................................................................................................19
2.2.2 Dynamic IP Connection...................................................................................................20
Chapter 3 Access to the Network Camera.............................................................23
3.1 Accessing by Web Browsers............................................................................ 23
3.2 Accessing by Client Software .......................................................................... 24
Chapter 4 Wi-Fi Settings.........................................................................................26
4.1 Configuring Wi-Fi Connection in Manage and Ad-hoc Modes........................... 26
4.2 Easy Wi-Fi Connection with WPS function....................................................... 31
4.3 IP Property Settings for Wireless Network Connection .................................... 33
Chapter 5 Live View ................................................................................................35
5.1 Live View Page ............................................................................................... 35
5.2 Starting Live View .......................................................................................... 36
5.2.1 Live Operation.................................................................................................................36
5.2.2 Install Plug-in ..................................................................................................................37
5.3 Recording and Capturing Pictures Manually.................................................... 38
5.4 Live View Quick Setup.................................................................................... 39
5.5 Operating PTZ Control.................................................................................... 40
5.5.1 PTZ Control Panel............................................................................................................40
5.5.2 Setting/Calling a Preset ..................................................................................................41
5.5.3 Setting/Calling a Patrol ...................................................................................................42
Chapter 6 Network Camera Configuration...........................................................44
6.1 Configuring Local Parameters ......................................................................... 44
6.2 Configure System Settings .............................................................................. 46
6.2.1 Configuring Basic Information ........................................................................................46
6.2.2 Configuring Time Settings...............................................................................................46
6.2.3 Configuring RS232 Settings.............................................................................................48
6.2.4 Configuring RS485 Settings.............................................................................................49

Network Camera User Manual
7
6.2.5 Configuring DST Settings.................................................................................................50
6.2.6 Configuring External Devices ..........................................................................................51
6.2.7 Configuring VCA Resource ..............................................................................................52
6.2.8 Configuring Metadata Settings .......................................................................................52
6.2.9 Open Source Software License .......................................................................................53
6.3 Maintenance ................................................................................................. 53
Upgrade & Maintenance ................................................................................................53
6.3.2 Log ..................................................................................................................................55
6.3.3 System Service ................................................................................................................56
6.3.4 Security Audit Log ...........................................................................................................57
6.4 Security Settings ............................................................................................ 58
Authentication ................................................................................................................59
6.4.2 IP Address Filter ..............................................................................................................59
6.4.3 Security Service...............................................................................................................61
6.4.4 Advanced Security ..........................................................................................................61
6.5 User Management ......................................................................................... 62
User Management ..........................................................................................................62
6.5.2 Security Question ...........................................................................................................64
Online Users....................................................................................................................66
Chapter 7 Network Settings ....................................................................................68
7.1 Configuring Basic Settings .............................................................................. 68
7.1.1 Configuring TCP/IP Settings ............................................................................................68
7.1.2 Configuring DDNS Settings..............................................................................................70
7.1.3 Configuring PPPoE Settings.............................................................................................72
7.1.4 Configuring Port Settings ................................................................................................72
7.1.5 Configure NAT (Network Address Translation) Settings..................................................74
7.1.6 Configuring Multicast .....................................................................................................75
7.2 Configure Advanced Settings .......................................................................... 76
Configuring SNMP Settings .............................................................................................76
7.2.2 Configuring FTP Settings .................................................................................................79
7.2.3 Configuring Email Settings ..............................................................................................81
7.2.4 Platform Access ..............................................................................................................83
7.2.5 Wireless Dial ...................................................................................................................84
7.2.6 HTTPS Settings ................................................................................................................86
7.2.7 Configuring QoS Settings ................................................................................................88
7.2.8 Configuring 802.1X Settings............................................................................................89
7.2.9 Integration Protocol........................................................................................................90
7.2.10 Bandwidth Adaptation....................................................................................................91
7.2.11 Network Service..............................................................................................................91
7.2.12 Smooth Streaming ..........................................................................................................92
Chapter 8 Video/Audio Settings .............................................................................95

Network Camera User Manual
8
8.1 Configuring Video Settings ............................................................................. 95
8.1.1 Video Settings .................................................................................................................95
8.1.2 Custom Video..................................................................................................................98
8.2 Configuring Audio Settings ........................................................................... 100
8.3 Configuring ROI Encoding ............................................................................. 100
8.4 Display Info. on Stream ................................................................................ 102
8.5 Configuring Target Cropping ......................................................................... 103
Chapter 9 Image Settings ......................................................................................104
9.1 Configuring Display Settings ......................................................................... 104
9.2 Configuring OSD Settings.............................................................................. 108
9.3 Configuring Privacy Mask ............................................................................. 110
9.4 Configuring Picture Overlay.......................................................................... 111
9.5 Configuring Image Parameters Switch........................................................... 112
Chapter 10 Event Settings.......................................................................................113
10.1 Basic Events ................................................................................................. 113
10.1.1 Configuring Motion Detection ......................................................................................113
10.1.2 Configuring Video Tampering Alarm.............................................................................119
10.1.3 Configuring Alarm Input ...............................................................................................120
10.1.4 Configuring Alarm Output ............................................................................................122
10.1.5 Handling Exception .......................................................................................................123
10.1.6 Configuring Flashing Alarm Light Output......................................................................123
10.1.7 Configuring Audible Alarm Output ...............................................................................124
10.1.8 Configuring Other Alarm...............................................................................................125
10.2 Smart Events................................................................................................ 128
Configuring Audio Exception Detection........................................................................128
10.2.2 Configuring Defocus Detection .....................................................................................130
10.2.3 Configuring Scene Change Detection ...........................................................................131
10.2.4 Configuring Face Detection...........................................................................................132
10.2.5 Configuring Intrusion Detection ...................................................................................133
10.2.6 Configuring Line Crossing Detection.............................................................................136
10.2.7 Configuring Region Entrance Detection........................................................................138
10.2.8 Configuring Region Exiting Detection ...........................................................................140
10.2.9 Configuring Unattended Baggage Detection ................................................................142
10.2.10 Configuring Object Removal Detection ........................................................................144
10.3 VCA Configuration........................................................................................ 146
Behavior Analysis..........................................................................................................146
10.3.2 Face Capture .................................................................................................................153
10.3.3 People Counting............................................................................................................157
10.3.4 Counting .......................................................................................................................161

Network Camera User Manual
9
10.3.5 Heat Map ......................................................................................................................162
10.3.6 Road Traffic ...................................................................................................................164
10.3.7 Queue Management.....................................................................................................166
Chapter 11 Storage Settings....................................................................................169
11.1 Configuring Record Schedule ........................................................................ 169
11.2 Configure Capture Schedule ......................................................................... 172
11.3 Configuring Net HDD.................................................................................... 174
11.4 Memory Card Detection............................................................................... 176
11.5 Configuring Lite Storage ............................................................................... 178
Chapter 12 Playback................................................................................................180
Chapter 13 Picture ...................................................................................................182
Chapter 14 Application ...........................................................................................183
14.1 Face Capture Statistics.................................................................................. 183
14.2 People Counting Statistics ............................................................................ 184
14.3 Heat Map Statistics ...................................................................................... 184
14.4 Counting Statistics ....................................................................................... 186
14.5 Queue Management Statistics...................................................................... 186
14.5.1 Queuing-Up Time Analysis............................................................................................187
14.5.2 Queue Status Analysis...................................................................................................188
14.5.3 Raw Data.......................................................................................................................189
14.6 Open Platform ............................................................................................. 189
Appendix ...............................................................................................................192
Appendix 1 SADP Software Introduction ............................................................... 192
Appendix 2 Port Mapping ...................................................................................... 195

Network Camera User Manual
10
System Requirement
Operating System
Microsoft Windows XP SP1 and above version
CPU
2.0 GHz or higher
RAM
1G or higher
Display
1024×768 resolution or higher
Web Browser
For camera that supports plug-in free live view
Internet Explorer 8 – 11, Mozilla Firefox 30.0 and above version and Google
Chrome 41.0 and above version.
Note:
For Google Chrome 45 and its above version or Mozilla Firefox 52 and its above
version which are plug-in free, Picture and Playback functions are hidden.
To use mentioned functions via web browser, change to their lower version, or
change to Internet Explorer 8.0 and above version.
For camera that does NOT support plug-in free live view
Internet Explorer 8 – 11, Mozilla Firefox 30.0 – 51, and Google Chrome 41.0 –
44.

Network Camera User Manual
11
Network Connection
Note:
You shall acknowledge that the use of the product with Internet access might be
under network security risks. For avoidance of any network attacks and
information leakage, please strengthen your own protection. If the product does
not work properly, please contact with your dealer or the nearest service center.
To ensure the network security of the network camera, we recommend you to
have the network camera assessed and maintained termly. You can contact us if
you need such service.
Before you start:
If you want to set the network camera via a LAN (Local Area Network), please
refer to Section 2.1 Setting the Network Camera over the LAN.
If you want to set the network camera via a WAN (Wide Area Network), please
refer to Section 2.2 Setting the Network Camera over the WAN.
Setting the Network Camera over the LAN
Purpose:
To view and configure the camera via a LAN, you need to connect the network
camera in the same subnet with your computer, and install the SADP or iVMS-4200
software to search and change the IP of the network camera.
Note: For the detailed introduction of SADP, please refer to Appendix 1.
Wiring over the LAN
The following figures show the two ways of cable connection of a network camera
and a computer:
Purpose:
To test the network camera, you can directly connect the network camera to the

Network Camera User Manual
12
computer with a network cable as shown in Figure 2-1.
Refer to the Figure 2-2 to set network camera over the LAN via a switch or a
router.
半球
Network Cable
or
Network Camera
Computer
Connecting Directly
网络交换机
半球
Network Cable
Network Cable
or
or
Network Camera Computer
Connecting via a Switch or a Router
Activating the Camera
You are required to activate the camera first by setting a strong password for it before
you can use the camera.
Activation via Web Browser, Activation via SADP, and Activation via Client Software
are all supported.
Activation via Web Browser
Steps:
1. Power on the camera, and connect the camera to the network.
2. Input the IP address into the address bar of the web browser, and click Enter to
enter the activation interface.
Notes:
 The default IP address of the camera is 192.168.1.64.
The computer and the camera should belong to the same subnet.
For the camera enables the DHCP by default, you need to use the SADP software

Network Camera User Manual
13
to search the IP address.
Activation via Web Browser
3. Create and input a password into the password field.
A password with user name in it is not allowed.
STRONG PASSWORD RECOMMENDED–We highly recommend you
create a strong password of your own choosing (using a minimum of 8
characters, including at least three of the following categories: upper case letters,
lower case letters, numbers, and special characters) in order to increase the
security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly
can better protect your product.
4. Confirm the password.
5. Click OK to save the password and enter the live view interface.
Activation via SADP Software
SADP software is used for detecting the online device, activating the camera, and
resetting the password.
Get the SADP software from the supplied disk or the official website, and install the
SADP according to the prompts. Follow the steps to activate the camera.
Steps:
1. Run the SADP software to search the online devices.

Network Camera User Manual
14
2. Check the device status from the device list, and select the inactive device.
SADP Interface
Note:
The SADP software supports activating the camera in batch. Refer to the user manual
of SADP software for details.
3. Create and input the password in the password field, and confirm the password.
A password with user name in it is not allowed.
STRONG PASSWORD RECOMMENDED–We highly recommend
you create a strong password of your own choosing (using a minimum
of 8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers, and special characters) in
order to increase the security of your product. And we recommend you
reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your
product.
Note:
You can enable the Hik-Connect service for the device during activation.
4. Click Activate to start activation.
You can check whether the activation is completed on the popup window. If activation
Select inactive device.
Input and confirm
password.

Network Camera User Manual
15
failed, please make sure that the password meets the requirement and try again.
5. Change the device IP address to the same subnet with your computer by either
modifying the IP address manually or checking the checkbox of Enable DHCP.
Modify the IP Address
6. Input the admin password and click Modify to activate your IP address
modification.
The batch IP address modification is supported by the SADP. Refer to the user manual
of SADP for details.
Activation via Client Software
The client software is versatile video management software for multiple kinds of
devices.
Get the client software from the supplied disk or the official website, and install the
software according to the prompts. Follow the steps to activate the camera.
Steps:
1. Run the client software and the control panel of the software pops up, as shown in

Network Camera User Manual
16
the figure below.
Control Panel
2. Click the Device Management icon to enter the Device Management interface, as
shown in the figure below.

Network Camera User Manual
17
Device Management Interface
3. Check the device status from the device list, and select an inactive device.
4. Click the Activate button to pop up the Activation interface.
5. Create a password and input the password in the password field, and confirm the
password.
A password with user name in it is not allowed.
STRONG PASSWORD RECOMMENDED–We highly recommend
you create a strong password of your own choosing (using a minimum of
8 characters, including at least three of the following categories: upper
case letters, lower case letters, numbers, and special characters) in order
to increase the security of your product. We recommend you reset your
password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.

Network Camera User Manual
18
Activation Interface (Client Software)
6. Click OK button to start activation.
7. Click the Modify Netinfo button to pop up the Network Parameter Modification
interface, as shown in the figure below.
Modifying the Network Parameters
8. Change the device IP address to the same subnet with your computer by either
modifying the IP address manually or checking the checkbox of Enable DHCP.
9. Input the password to activate your IP address modification.

Network Camera User Manual
19
(Optional) Setting Security Question
Security question is used to reset the admin password when admin user forgets the
password.
Admin user can follow the pop-up window to complete security question settings
during camera activation. Or, admin user can go to User Management interface to set
up the function.
Setting the Network Camera over the WAN
Purpose:
This section explains how to connect the network camera to the WAN with a static IP
or a dynamic IP.
Static IP Connection
Before you start:
Please apply a static IP from an ISP (Internet Service Provider). With the static IP
address, you can connect the network camera via a router or connect it to the WAN
directly.
Connecting the network camera via a router
Steps:
1. Connect the network camera to the router.
2. Assign a LAN IP address, the subnet mask and the gateway. Refer to Section 2.1.2
for detailed IP address configuration of the network camera.
3. Save the static IP in the router.
4. Set port mapping, e.g., 80, 8000, and 554 ports. The steps for port mapping vary
according to the different routers. Please call the router manufacturer for
assistance with port mapping.
Note: Refer to Appendix 2 for detailed information about port mapping.