HIK VISION iDS-TCV907-BIR User manual

Network Trac Camera
Operaon Manual

Iniaves on the Use of Video Products
Thank you for choosing Hikvision products.
Technology aects every aspect of our life. As a high-tech company, we are increasingly aware of
the role technology plays in improving business eciency and quality of life, but at the same me,
the potenal harm of its improper usage. For example, video products are capable of recording
real, complete and clear images. This provides a high value in retrospect and preserving real-me
facts. However, it may also result in the infringement of a third party's legimate rights and
interests if improper distribuon, use and/or processing of video data takes place. With the
philosophy of "Technology for the Good", Hikvision requests that every end user of video
technology and video products shall comply with all the applicable laws and regulaons, as well as
ethical customs, aiming to jointly create a beer community.
Please read the following iniaves carefully:
●Everyone has a reasonable expectaon of privacy, and the installaon of video products should
not be in conict with this reasonable expectaon. Therefore, a warning noce shall be given in
a reasonable and eecve manner and clarify the monitoring range, when installing video
products in public areas. For non-public areas, a third party's rights and interests shall be
evaluated when installing video products, including but not limited to, installing video products
only aer obtaining the consent of the stakeholders, and not installing highly-invisible video
products.
●The purpose of video products is to record real acvies within a specic me and space and
under specic condions. Therefore, every user shall rst reasonably dene his/her own rights in
such specic scope, in order to avoid infringing on a third party's portraits, privacy or other
legimate rights.
●During the use of video products, video image data derived from real scenes will connue to be
generated, including a large amount of biological data (such as facial images), and the data could
be further applied or reprocessed. Video products themselves could not disnguish good from
bad regarding how to use the data based solely on the images captured by the video products.
The result of data usage depends on the method and purpose of use of the data controllers.
Therefore, data controllers shall not only comply with all the applicable laws and regulaons and
other normave requirements, but also respect internaonal norms, social morality, good
morals, common pracces and other non-mandatory requirements, and respect individual
privacy, portrait and other rights and interests.
●The rights, values and other demands of various stakeholders should always be considered when
processing video data that is connuously generated by video products. In this regard, product
security and data security are extremely crucial. Therefore, every end user and data controller,
shall undertake all reasonable and necessary measures to ensure data security and avoid data
leakage, improper disclosure and improper use, including but not limited to, seng up access
Network Trac Camera Operaon Manual
i

control, selecng a suitable network environment (the Internet or Intranet) where video
products are connected, establishing and constantly opmizing network security.
●Video products have made great contribuons to the improvement of social security around the
world, and we believe that these products will also play an acve role in more aspects of social
life. Any abuse of video products in violaon of human rights or leading to criminal acvies are
contrary to the original intent of technological innovaon and product development. Therefore,
each user shall establish an evaluaon and tracking mechanism of their product applicaon to
ensure that every product is used in a proper and reasonable manner and with good faith.
Network Trac Camera Operaon Manual
ii

Legal Informaon
©2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and
all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision website ( hps://
www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of
Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH
ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
Network Trac Camera Operaon Manual
iii

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER
PREVAILS.
Network Trac Camera Operaon Manual
iv

Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger
Indicates a hazardous situaon which, if not avoided, will or could
result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if not avoided, could
result in equipment damage, data loss, performance degradaon, or
unexpected results.
Note Provides addional informaon to emphasize or supplement
important points of the main text.
Network Trac Camera Operaon Manual
v

Contents
Chapter 1 Acvaon and Login ................................................................................................... 1
1.1 Acvaon ............................................................................................................................... 1
1.1.1 Default Informaon ...................................................................................................... 1
1.1.2 Acvate via SADP .......................................................................................................... 1
1.1.3 Acvate via Web Browser ............................................................................................. 2
1.2 Login ...................................................................................................................................... 3
Chapter 2 Live View and Local Conguraon .............................................................................. 4
2.1 Live View ................................................................................................................................ 4
2.1.1 Start/Stop Live View ...................................................................................................... 4
2.1.2 Select Image Display Mode ........................................................................................... 4
2.1.3 Select Window Division Mode ...................................................................................... 4
2.1.4 Select Stream Type ........................................................................................................ 4
2.1.5 Capture Picture Manually ............................................................................................. 4
2.1.6 Record Manually ........................................................................................................... 4
2.1.7 Start/Stop Two-Way Audio ............................................................................................ 5
2.1.8 Enable/Disable Audio .................................................................................................... 5
2.1.9 Enable Digital Zoom ...................................................................................................... 5
2.1.10 Enable Regional Focus ................................................................................................. 6
2.1.11 Enable Regional Exposure ........................................................................................... 6
2.1.12 Select Video Mode ...................................................................................................... 7
2.2 PTZ Operaon ........................................................................................................................ 7
2.3 Local Conguraon ................................................................................................................ 8
Chapter 3 Playback ................................................................................................................... 12
Chapter 4 Record and Capture .................................................................................................. 13
4.1 Set Storage Path ................................................................................................................... 13
4.1.1 Set Storage Card .......................................................................................................... 13
Network Trac Camera Operaon Manual
vi

4.1.2 Set FTP ........................................................................................................................ 14
4.1.3 Set SDK Listening ......................................................................................................... 15
4.1.4 Set Arm Host ............................................................................................................... 16
4.1.5 Set ISAPI Listening ....................................................................................................... 17
4.1.6 Set Cloud Storage ........................................................................................................ 18
4.2 Set Quota ............................................................................................................................. 19
4.3 Set Record Schedule ............................................................................................................ 20
Chapter 5 Encoding and Display ................................................................................................ 22
5.1 Set Video Encoding Parameters ........................................................................................... 22
5.2 Set Image Parameters .......................................................................................................... 23
5.3 Set ICR .................................................................................................................................. 26
5.4 Set ROI ................................................................................................................................. 26
5.5 Set Privacy Mask .................................................................................................................. 27
5.6 Set OSD ................................................................................................................................ 29
Chapter 6 Network Conguraon ............................................................................................. 31
6.1 Set IP Address ...................................................................................................................... 31
6.2 Connect to Plaorm ............................................................................................................. 33
6.2.1 Connect to ISUP Plaorm ........................................................................................... 33
6.2.2 Connect to Hik-Connect .............................................................................................. 34
6.3 Set DDNS .............................................................................................................................. 35
6.4 Set SNMP ............................................................................................................................. 36
6.5 Set QoS ................................................................................................................................. 37
6.6 Set IEEE 802.1X .................................................................................................................... 37
6.7 Set Port ................................................................................................................................ 38
Chapter 7 Serial Port Conguraon ........................................................................................... 41
7.1 Set RS-485 ............................................................................................................................ 41
7.2 Set RS-232 ............................................................................................................................ 42
Chapter 8 Event and Alarm ....................................................................................................... 43
Network Trac Camera Operaon Manual
vii

8.1 Excepon Alarm ................................................................................................................... 43
8.2 Set Email .............................................................................................................................. 43
8.3 Set Email Event .................................................................................................................... 45
Chapter 9 Safety Management ................................................................................................. 46
9.1 Manage User ........................................................................................................................ 46
9.2 Set IP Address Filtering ........................................................................................................ 46
9.3 Enable User Lock .................................................................................................................. 47
9.4 Set HTTPS ............................................................................................................................. 47
9.4.1 Create and Install Self-signed Cercate .................................................................... 47
9.4.2 Install Authorized Cercate ....................................................................................... 48
9.5 Set SSH ................................................................................................................................. 48
9.6 Set RTSP Authencaon ...................................................................................................... 48
9.7 Set Timeout Logout .............................................................................................................. 49
9.8 Set Password Validity Period ................................................................................................ 49
Chapter 10 Maintenance .......................................................................................................... 50
10.1 View Device Informaon .................................................................................................... 50
10.2 Log ..................................................................................................................................... 50
10.2.1 Enable System Log Service ........................................................................................ 50
10.2.2 Enable Log According to Module .............................................................................. 50
10.2.3 Search Log ................................................................................................................. 51
10.3 Upgrade ............................................................................................................................. 51
10.4 Reboot ............................................................................................................................... 52
10.5 Restore Parameters ............................................................................................................ 52
10.6 Synchronize Time ............................................................................................................... 52
10.7 Set DST ............................................................................................................................... 53
10.8 Debug ................................................................................................................................. 53
10.8.1 Debug Device ............................................................................................................ 53
10.8.2 Vehicle Capture and Recognion Service .................................................................. 54
Network Trac Camera Operaon Manual
viii

10.8.3 Set Image Format ...................................................................................................... 56
10.9 Export Parameters ............................................................................................................. 56
10.10 Import Conguraon File ................................................................................................. 56
10.11 Export Debug File ............................................................................................................. 57
10.12 Export Diagnosis Informaon .......................................................................................... 57
Appendix A. Communicaon Matrix and Device Command ...................................................... 58
Network Trac Camera Operaon Manual
ix

Chapter 1 Acvaon and Login
1.1 Acvaon
For the rst-me access, you need to acvate the device by seng an admin password. No
operaon is allowed before acvaon. The device supports mulple acvaon methods, such as
acvaon via SADP soware, web browser, and iVMS-4200 Client.
Note
Refer to the user manual of iVMS-4200 Client for the acvaon via client soware.
1.1.1 Default Informaon
The device default informaon is shown as below.
●Default IP address: 192.168.1.64
●Default user name: admin
1.1.2 Acvate via SADP
SADP is a tool to detect, acvate, and modify the IP address of the device over the LAN.
Before You Start
●Get the SADP soware from the supplied disk or the ocial website ( hp://
www.hikvision.com/ ), and install it according to the prompts.
●The device and the computer that runs the SADP tool should belong to the same network
segment.
The following steps show how to acvate one device and modify its IP address. For batch acvaon
and IP address modicaon, refer to User Manual of SADP for details.
Steps
1. Run the SADP soware and search the online devices.
2. Find and select your device in online device list.
3. Enter a new password (admin password) and conrm the password.
Cauon
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
4. Click Acvate to start acvaon.
Network Trac Camera Operaon Manual
1

Figure 1-1 Acvate via SADP
Status of the device becomes Acve aer successful acvaon.
5. Modify IP address of the device.
1) Select the device.
2) Change the device IP address to the same network segment as your computer by either
modifying the IP address manually or checking Enable DHCP (Dynamic Host Conguraon
Protocol).
3) Enter the admin password and click Modify to acvate your IP address modicaon.
1.1.3 Acvate via Web Browser
Use web browser to acvate the device. For the device with the DHCP enabled by default, use
SADP soware or client soware to acvate the device.
Before You Start
Ensure the device and the computer are in the LAN with the same network segment.
Steps
1. Change the IP address of your computer to the same network segment as the device.
2. Open the web browser, and enter the default IP address of the device to enter the acvaon
interface.
3. Create and conrm the admin password.
Network Trac Camera Operaon Manual
2

Cauon
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
4. Click OK to complete acvaon.
5. Go to the network sengs interface to modify IP address of the device.
1.2 Login
You can log in to the device via web browser for further operaons such as live view and local
conguraon.
Before You Start
Connect the device to the network directly, or via a switch or a router.
Steps
1. Open the web browser, and enter the IP address of the device to enter the login interface.
2. Enter User Name and Password.
3. Click Login.
4. Download and install appropriate plug-in for your web browser. Follow the installaon prompts
to install the plug-in.
5. Reopen the web browser aer the installaon of the plug-in and repeat steps 1 to 3 to login.
6. Oponal: Click Logout on the upper right corner of the interface to log out of the device.
Network Trac Camera Operaon Manual
3

Chapter 2 Live View and Local Conguraon
2.1 Live View
2.1.1 Start/Stop Live View
Click to start live view. Click to stop live view.
2.1.2 Select Image Display Mode
Click to select an image display mode.
2.1.3 Select Window Division Mode
Click to select a window division mode.
2.1.4 Select Stream Type
Click to select the stream type. It is recommended to select the main stream to get the high-
quality image when the network condion is good, and select the sub-stream to get the uent
image when the network condion is not good enough. The third stream is custom.
Note
The third stream varies with dierent models. The actual device prevails.
2.1.5 Capture Picture Manually
You can capture pictures manually on the live view image and save them to the computer.
Steps
1. Click to capture a picture.
2. Oponal: Click Conguraon → Local → Live View Parameters and select Image Format.
3. Oponal: Click Conguraon → Local → Picture and Clip Sengs to view the saving path of
snapshots in live view.
2.1.6 Record Manually
You can record videos manually on the live view image and save them to the computer.
Network Trac Camera Operaon Manual
4

Steps
1. Click to start live view.
2. Click to start recording.
3. Click to stop recording.
4. Oponal: Click Conguraon → Local → Record File Sengs to view the saving path of record
les.
2.1.7 Start/Stop Two-Way Audio
The device supports two-way audio with terminals, such as computers.
Before You Start
The device is equipped with an audio input interface and audio output interface, which support
connecng with the corresponding devices, such as microphones and loudspeakers.
Steps
Note
The funcon varies with dierent models. The actual device prevails.
1. Select a window to start two-way audio.
2. Click to start live view.
3. Click to start two-way audio.
When speaking at the PC end, you can hear the voice at the device end and vice versa.
4. Click to stop two-way audio.
2.1.8 Enable/Disable Audio
Enable the audio if necessary aer connecng an audio input device under the audio & video
stream. Click to enable and adjust it. Click again to disable this funcon.
Note
The funcon varies with dierent models. The actual device prevails.
2.1.9 Enable Digital Zoom
You can enable digital zoom to zoom in a certain part of the live view image.
Steps
1. Click to start live view.
2. Click to enable digital zoom.
3. Place the cursor on the live view image posion which needs to be zoomed in. Drag the mouse
rightwards and downwards to draw an area.
Network Trac Camera Operaon Manual
5

The area will be zoomed in.
4. Click any posion of the image to restore to normal image.
5. Click to disable digital zoom.
2.1.10 Enable Regional Focus
Steps
Note
The funcon varies with dierent models. The actual device prevails.
1. Click .
2. Drag the cursor from the upper le corner to the lower right corner to select the area that needs
to be focused.
Result
The selected area is focused.
2.1.11 Enable Regional Exposure
Enable regional exposure to expose paral area of the live view image.
Steps
1. Go to Conguraon → Video → Video Encoding → Regional Exposure .
2. Check Enable.
3. Drag the mouse to draw an area.
The drawn area will be exposed.
Figure 2-1 Enable Regional Exposure
4. Click Save.
Network Trac Camera Operaon Manual
6

2.1.12 Select Video Mode
Set the video mode when adjusng the device focus during construcon.
Click and select when the device is running normally.
2.2 PTZ Operaon
Click Live View. Click and click to show the PTZ control panel.
Note
●The PTZ supports power-o memory. When the device is suddenly cut o power or restarted
normally, it can automacally return to the posion before the power cut or reboot.
●The PTZ funcon varies with dierent models. The actual device prevails.
●Other unmenoned buons are reserved buons.
Figure 2-2 Control Panel
Table 2-1 Buon Descripon
Buon Descripon
Adjust the PTZ speed.
/ Zoom + and Zoom -
●Hold to zoom in the scene.
●Hold to zoom out the scene.
/ Focus + and Focus -
Network Trac Camera Operaon Manual
7

Buon Descripon
●Hold under the manual focus mode to make near objects
become clear and distant objects become vague.
●Hold to make distant objects become clear and near
objects become vague.
/ Iris + and Iris –
●Hold to increase the iris diameter when in a dark
environment.
●Hold to decrease the iris diameter when in a bright
environment.
Lens Inializaon
It is applicable to devices with motorized lenses. You can use this
funcon when overcoming image blurs caused by overme
zooming or focusing.
Auxiliary Focus
It is applicable to devices with motorized lenses. Use this
funcon to focus the lens automacally and make images
become clear.
2.3 Local Conguraon
Go to Conguraon → Local to set the live view parameters and change the saving paths of videos,
captured pictures, scene pictures, etc.
Note
The parameters vary with dierent models. The actual device prevails.
Network Trac Camera Operaon Manual
8

Figure 2-3 Local Conguraon
Protocol Type
Select the network transmission protocol according to the actual needs.
TCP
Ensures complete delivery of streaming data and beer video quality, but the real-me
transmission will be aected.
UDP
Provides real-me audio and video streams.
HTTP
Gets streams from the device by a third party client.
HTTPS
Gets streams in hps format.
Stream Type
Network Trac Camera Operaon Manual
9

Main Stream
Select it to get the high-quality image when the network condion is good.
Sub-Stream
Select it to get the uent image when the network condion is not good enough.
Live View Performance
Shortest Delay
The video is real-me, but its uency may be aected.
Balanced
Balanced mode considers both the real me and uency of the video.
Fluency
When the network condion is good, the video is uent.
Decoding Type
Soware Decoding
Decode via soware. It takes up more CPU resources but provides images with beer quality
when it compares to the hardware decoding.
Hardware Decoding
Decode via GPU. It takes up less CPU resources but provides images with worse quality when
it compares to the soware decoding.
Rules Informaon
If you enable this funcon, tracking frames will be displayed on the live view interface when
there are vehicles passing.
Feature Informaon
Enable it to display feature informaon of the target on the live view image.
Image Size
The display rao of the live view image.
Image Format
The saving format of manually captured images.
Radar Track
When the radar is connected, enable it to make the linked camera be able to track the detected
target.
Record File Size
Select the packed size of the manually recorded video les. Aer the selecon, the max. record
le size is the value you selected.
Save record les to
Set the saving path of the manually recorded video les.
Network Trac Camera Operaon Manual
10