HIK VISION DS-2CD783F-EI User manual

Indoor IP Dome Camera
Installation Guide
Hangzhou Hikvision Digital Technology Co., Ltd.
http://www.hikvision.com

1
Installation Guide of Indoor IP Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Thank you for purchasing our product. If there are any questions, or requests, please do not
hesitate to contact the dealer. This manual applies to
Indoor IP Dome Camera: DS-2CD783F-E(I), DS-2CD754F-E(I), DS-2CD764FWD-E(I),
DS-2CD754FWD-E(I), DS-2CD753F-E(I), DS-2CD763PF(NF)-E(I), DS-2CD793PF(NF)-E(I),
DS-2CD793PFWD(NFWD)-E(I), DS-2CD733F-E(I)
This manual may contain several technical incorrect places or printing errors, and the content is
subject to change without notice. The updates will be added to the new version of this manual. We
will readily improve or update the products or procedures described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the security
or signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as
outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification does not cover the
performance or reliability of the security or signaling aspects of this product. UL MAKES NO
REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS
PRODUCT.”

2
Installation Guide of Indoor IP Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid
danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
1. In the use of the product, you must strictly comply with the electrical safety regulations of the
nation and region.
2. Source with DC 12V or AC24V according to the IEC60950-1 standard. Please refer to technical
specifications for more details.
3. Do not connect several devices to one power adapter as an adapter overload may cause
over-heating and can be a fire hazard. If use the POE as the power supply, please make sure that
the POE Switch have the sufficient power.
4. Please make sure that the plug is firmly inserted into the power socket.
5. When the product is installed on a wall or ceiling, the device should be firmly fixed.
6. If smoke, odor, or noise rise from the device, turn off the power at once and unplug the power
cable, then contact the service center.
7. If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)

3
Installation Guide of Indoor IP Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Notice:
1. Make sure the power supply voltage is correct before using the camera.
2. Do not drop the camera or subject it to physical shock.
3. Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit
of ethanol and wipe it gently. If the camera will not be used for an extended period of time, put
on the lens cap to protect the sensor from dirt.
4. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of sensor at the
same time.
5. The sensor may be burned out by a laser beam, so when any laser equipment is being used,
make sure that the surface of the sensor will not be exposed to the laser beam.
6. Do not place the camera in extremely hot or cold temperatures (the operating temperature
should be between -10°C ~+60°C , dusty or damp locations, and do not expose it to high
electromagnetic radiation.
7. To avoid heat accumulation, good ventilation is required for a proper operating environment.
8. While shipping, the camera should be packed in its original packing, or packing of the same
texture.
9. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment should be
replaced regularly according to their average life time. The average time varies because of
differences between operating environment and usage history, so regular checking is
recommended for all users. Please contact with your dealer for more details.

4
Installation Guide of Indoor IP Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Table of Contents
Chapter 1 Introduction................................................................................................................................................. 1
1.1 Network camera Functions and Features....................................................................................................... 1
1.2 Applications................................................................................................................................................... 1
Chapter 2 Physical Description ................................................................................................................................... 3
Chapter 3 Installation................................................................................................................................................... 5

1
Installation Guide of Indoor IP Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Chapter 1 Introduction
Network camera is a kind of embedded digital surveillance product that combines the features
of both traditional analog camera and net DVS (Digital Video Server). Due to the embedded Linux
operation system and the latest DaVinci hardware platform of TI, the system operates with high
scheduling efficiency. Furthermore, the firmware is burned in the flash, which makes the product
small, reliable and highly stable.
1.1 Network camera Functions and Features
Functions:
Advanced compression with high compression ratio.
Heartbeat Function: The server can acquire real time operating performance of the network
camera through the heartbeat function.
Two way audio.
Alarm Function: Motion detection, Video tampering, Network disconnect, IP address conflict,
Storage exception.
Support reset button, dual stream, mobile phone surveillance.
User Management: Support multilevel right management. The administrator can create up to
15 separate users with different right levels, which highly improves the system security.
Build-in WEB browser and support IE browsing.
Software Development Kit (SDK) is available.
Compression Functions:
Support 1 channel video signal and standard H.264 encoding compression, which supports both
variable bit rate and variable frame rate; besides, you can self-define both the video quality and
its compressed bit rate.
Remote Control:
The product offers a 10M/100M self-adaptive Ethernet interface.
Support TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP protocols.
Set the parameters, browse real time videos or check the camera performance through
software or IE, and store the compressed bit rate through network.
Support remote upgrades and maintenance.
1.2 Applications
This camera is ideal for remote control network applications. E.g.:
1. Network surveillance for bank counters, supermarkets and factories.

2
Installation Guide of Indoor IP Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
2. Remote surveillance for nursing homes, kindergartens and schools.
3. AI janitors.
4. AI building/district management systems.
5. Self-service systems of power plants.
6. Pipelining and warehouse monitoring.

3
Installation Guide of Indoor IP Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Chapter 2 Physical Description
Indoor IP Dome Camera Descriptions:
Figure 2.1
Serial NO.
Description
1
10M/100M self-adaptive Ethernet interface
2
INITIAL SET: Reset the camera
3
AUDIO OUT: Audio output interface
4
MIC IN: Audio input interface
5
D+, D-: RS-485 interface
6
1A, 1B, 2A, 2B: Alarm output interface
7
IN1, GND, IN2, GND: Alarm input interface
8
Power supply
Indoor IP Dome Camera Connection:

4
Installation Guide of Indoor IP Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 2.2

5
Installation Guide of Indoor IP Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Chapter 3 Installation
Note:
1. Please check if all the items on the package list have been included with your camera.
2. Read the following contents carefully before the installation.
3. Make sure that all the related equipment is power-off during the installation.
4. Check the power supply to prevent any damage caused by mismatching problems.
5. Do not place the camera in extremely hot or damp environment. To avoid heat
accumulation, good ventilation is required for a proper operating environment.
6. If the product does not operate properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. Users are responsible for any
problem caused by modification or repairing without authorization.
Indoor IP Dome Camera Installation
The ceiling mount is a suitable installation method for this camera. Please stick to the following
steps:
Figure 3.1
Step 1: Use the screws to fix the bottom plate on the ceiling, and rotate dome camera
counterclockwise to attach it to the bottom plate, and finally use the lock screw to secure the dome
camera.
Note:
If required, user can apply the pliers to
remove the clip (refer to the part marked
in dotted line) on the side of the back box
and then feed cables through the opening
to secure on the ceiling.

6
Installation Guide of Indoor IP Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 3.2
Step 2: Loosen the set screws with a hexagonal screw driver (attached with the camera), and take
down the dome cover.
Figure 3.3
Step 3: While viewing the video on the monitor, adjust the camera’s view angle for your need.
Figure 3.4

7
Installation Guide of Indoor IP Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Step 4: Install the dome cover and tighten the screws.
Figure 3.5

8
Installation Guide of Indoor IP Dome Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
First Choice for Security Professionals