HIK VISION DS-2TD4166 User manual

Thermal Bi-spectrum Network
Speed dome
User Manual
UD05160B
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

i
User Manual of Thermal Bi-spectrum Network Speed dome
User Manual
COPYRIGHT © 2017 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties
of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to Thermal Bi-spectrum Network Speed dome.
The Manual includes instructions for using and managing the product. Pictures, charts, images
and all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version in the company website
(http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in
various jurisdictions. Other trademarks and logos mentioned below are the properties of their
respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED,
WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS
AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR
ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS
OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN
YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

ii
User Manual of Thermal Network Speed dome
CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT
THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW,
THE LATER PREVAILS.
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

iii
User Manual of Thermal Network Speed dome
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked
with "CE" and comply therefore with the applicable harmonized European
standards listed under the Low Voltage Directive 2006/95/EC, the EMC
Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For
proper recycling, return this product to your local supplier upon the
purchase of equivalent new equipment, or dispose of it at designated
collection points. For more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot
be disposed of as unsorted municipal waste in the European Union. See
the product documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or
to a designated collection point. For more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

iv
User Manual of Thermal Network Speed dome
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are
neglected.
Warnings Follow these safeguards to
Cautions Follow these precautions to
prevent serious injury or death.
prevent potential injury or material damage.
Warnings
The device should be used in compliance with local laws and electrical safety regulations. Refer to the
appropriate documentation for detailed information.
The input voltage should conform to IEC60950-1 standard: SELV (Safety Extra Low Voltage) and the
Limited Power Source (24 VAC/12 VDC). Refer to the appropriate documentation for detailed
information.
DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused
by overload.
Make sure the plug is properly connected to the power socket.
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable,
and contact the service center.
The installer and user are responsible for password and security configuration and its settings.
Both internal and external grounds should be connected properly. (The cross section area of the
grounding wire must be no less than 4 mm2, and no less than that of the phase connector).
Cautions
Do not drop the device or subject it to physical shock.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
Do not aim the lens at the sun or any other bright light.
When any laser equipment is in use, make sure that the device lens is not exposed to the laser beam, or
it may burn out.
Do not expose the device to high electromagnetic radiation or extremely hot, cold, dusty, or damp
environments.
Place the device in a dry and well-ventilated environment.
Keep non-waterproof devices away from liquids.
Keep the device in original or similar packaging while transporting it.
A few device components (e.g., electrolytic capacitor) require regular replacement. The average lifespan
varies, so periodic checking is recommended. Contact your dealer for details.
Improper use or replacement of the battery may result in explosion hazard. Replace with the same or
equivalent type only. Dispose of used batteries in conformance with the instructions provided by the
battery manufacturer.
Never attempt to disassemble the device.
0504001070316
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

v
User Manual of Thermal Network Speed dome
Table of Contents
Chapter 1 Overview ...................................................................................................................1
1.1 Overview ..................................................................................................................................1
1.2 System Requirement............................................................................................................. 1
1.3 Functions................................................................................................................................2
Chapter 2 Network Connection ................................................................................................4
2.1 Setting the Network Speed dome over the LAN.................................................................4
2.1.1 Wiring over the LAN .......................................................................................................... 4
2.1.2 Activating the Speed dome .............................................................................................. 5
2.2 Setting the Network Speed dome over the WAN .............................................................10
2.2.1 Static IP Connection........................................................................................................ 10
2.2.2 Dynamic IP Connection ..................................................................................................11
Chapter 3 Access to the Network Speed dome .................................................................... 14
3.1 Accessing by Web Browsers ..............................................................................................14
3.2 Accessing by Client Software.............................................................................................15
Chapter 4 Basic Operations....................................................................................................17
4.1 Configuring Local Parameters ...........................................................................................17
4.2 Live View Page .....................................................................................................................18
4.3 Starting Live View ................................................................................................................19
4.4 Operating PTZ Control ........................................................................................................21
4.4.1 PTZ Control Panel ....................................................................................................... 22
4.4.2 Auxiliary Functions...................................................................................................... 23
4.4.3 Setting / Calling a Preset ............................................................................................ 25
4.4.4 Setting / Calling a Patrol............................................................................................. 27
4.4.5 One-touch Patrol .............................................................................................................29
4.4.6 Setting / Calling a Pattern .......................................................................................... 29
4.5 Playback ...............................................................................................................................30
4.5.1 Play Back Video Files ...................................................................................................... 31
4.5.2 Downloading Video Files ................................................................................................ 32
4.6 Pictures.................................................................................................................................33
Chapter 5 System Configuration............................................................................................ 35
5.1 Storage Settings ..................................................................................................................35
5.1.1 Configuring Recording Schedule............................................................................... 35
5.1.2 Configuring Capture Schedule................................................................................... 37
5.1.3 Configuring Net HDD .................................................................................................. 39
5.2 Basic Event Configuration ..................................................................................................41
5.2.1 Configuring Motion Detection........................................................................................ 41
5.2.2 Configuring Video Tampering Alarm......................................................................... 46
5.2.3 Configuring Alarm Input ............................................................................................. 47
5.2.4 Configuring Alarm Output .......................................................................................... 49
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

vi
User Manual of Thermal Network Speed dome
5.2.5 Handling Exception .....................................................................................................50
5.3 Smart Event Configuration .................................................................................................50
5.3.1 Detecting Audio Exception ............................................................................................. 51
5.3.2 Configuring Fire and Smoke Detection .........................................................................52
5.3.3 Configuring Fire Source Detection Shield.................................................................54
5.3.4 Configuring Smoke Detection Shield ........................................................................55
5.3.5 Ship Detection.................................................................................................................. 57
5.4 Temperature Measurement................................................................................................58
5.4.1 Temperature Measurement Configuration............................................................... 58
5.4.2 Temperature Measurement and Alarm .................................................................... 60
Chapter 6 VCA Configuration .................................................................................................65
6.1 Configuring VCA Information .............................................................................................65
6.2 Advanced Configuration .....................................................................................................66
6.3 Behavior Analysis ................................................................................................................67
6.4 Rule Configuration Demonstration....................................................................................71
6.4.1 Line Crossing ...............................................................................................................71
6.4.2 Intrusion ....................................................................................................................... 73
6.4.3 Region Entrance .......................................................................................................... 74
6.4.4 Region Exiting .............................................................................................................. 75
Chapter 7 Speed dome Configuration ................................................................................... 76
7.1 Configuring Network Settings ............................................................................................76
7.1.1 Basic Settings .............................................................................................................. 76
7.1.2 Advanced Settings ...................................................................................................... 82
7.2 Configuring Video and Audio Settings ..............................................................................90
7.2.1 Configuring Video Settings............................................................................................. 90
7.2.2 Configuring Audio Settings ........................................................................................ 92
7.2.3 Configuring ROI Settings ............................................................................................ 92
7.3 PTZ Configuration ...............................................................................................................94
7.3.1 Configuring Basic PTZ Parameters............................................................................... 94
7.3.2 Configuring PTZ Limits............................................................................................... 96
7.3.3 Configuring Initial Position ......................................................................................... 97
7.3.4 Configuring Park Actions............................................................................................ 98
7.3.5 Configuring Privacy Mask .......................................................................................... 99
7.3.6 Configuring Scheduled Tasks ..................................................................................100
7.3.7 Clearing PTZ Configurations .................................................................................... 101
7.3.8 Prioritize PTZ.............................................................................................................. 102
7.3.9 Position Settings ....................................................................................................... 102
7.3.10 Configuring Linear Scan ...........................................................................................104
7.4 Configuring Image Settings..............................................................................................105
7.4.1 Configuring Display Settings....................................................................................105
7.4.2 Configuring OSD Settings......................................................................................... 114
7.4.3 Configuring Text Overlay Settings ...........................................................................115
7.4.4 VCA Rule Display .......................................................................................................116
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

vii
User Manual of Thermal Network Speed dome
7.4.5 Configuring DPC Settings.........................................................................................116
7.4.6 Picture in Picture .......................................................................................................117
7.5 Configuring System Settings ...........................................................................................118
7.5.1 System Settings ............................................................................................................ 118
7.5.2 Maintenance .............................................................................................................. 122
7.5.3 Security....................................................................................................................... 126
7.5.4 User Management..................................................................................................... 128
Appendix....................................................................................................................................... 133
SADP Software Introduction .........................................................................................................133
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

User Manual of Thermal Bi-spectrum Network Speed dome
1
Chapter 1Overview
Overview
Thermal bi-spectrum network speed dome (named as speed dome in the chapters below)
the function of the decoder, thermal camera, and the high-definition zoom
camera. It performs temperature measurement, dynamic fire source detection and other
smart detections in the remote surveillance of the power system, metallurgy system, and
petrochemical engineering, and so on.
You can get a high-quality live view via web browser or client software.
The figure below shows one type of the speed dome series.
1.1
integrates
Figure 1-1 Overview of Thermal Speed dome
1.2 System Requirement
System requirement of web browser accessing is as follows:
Operating System: Microsoft Windows XP SP1 and above version / Vista / Win7 / Server
2003 / Server 2008 32bits
CPU: Intel Pentium IV 3.0 GHz or higher
RAM: 1G or higher
Display: 1024× 768 resolution or higher
Web Browser: Internet Explorer 8.0 and above version, Apple Safari 5.02 and above version,
Mozilla Firefox 5 and above version and Google Chrome 18 and above versions.
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

2
User Manual of Thermal Network Speed dome
1.3 Functions
The functions vary depending on the models of speed dome.
Bi-spectrum
The speed dome has two lens, an optical one and a thermal one, and two images are
respectively provided by each lens.
PTZ Limits
The speed dome can be programmed to move within the PTZ limits (left/right, up/down).
Scan Modes
The speed dome provides 5 scan modes: auto scan, tilt scan, frame scan, random scan
and panorama scan.
Presets
A preset is a predefined image position. When the preset is called, the speed dome will
automatically move to the defined position. The presets can be added, modified, deleted
and called.
Label Display
The on-screen label of the preset title, azimuth/elevation, zoom, time and speed dome
name can be displayed on the monitor. The displays of time and speed dome name can be
programmed.
Auto Flips
In manual tracking mode, when a target object goes directly beneath the speed dome, the
video will automatically flips 180 degrees in horizontal direction to maintain continuity of
tracking. This function can also be realized by auto mirror image depending on different
camera models.
Privacy Mask
This function allows you to block or mask certain area of a scene, for preventing the
personal privacy from recording or live viewing. A masked area will move with pan and tilt
functions and automatically adjust in size as the lens zooms telephoto and wide.
3D Positioning
In the client software, use the left key of mouse to click on the desired position in the video
image and drag a rectangle area in the lower right direction, then the speed dome will
move the position to the center and allow the rectangle area to zoom in. Use the left key of
mouse to drag a rectangle area in the upper left direction to move the position to the
center and allow the rectangle area to zoom out.
Proportional Pan/Tilt
Proportional pan/tilt automatically reduces or increases the pan and tilt speeds according
to the amount of zoom. At telephoto zoom settings, the pan and tilt speeds will be slower
than at wide zoom settings. This keeps the image from moving too fast on the live view
image when there is a large amount of zoom.
Auto Focus
The auto focus enables the camera to focus automatically to maintain clear video images.
Day/Night Auto Switch
The speed domes deliver color images during the day. And as light diminishes at night, the
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

3
User Manual of Thermal Network Speed dome
speed domes switch to night mode and deliver black and white images with high quality.
Slow Shutter
In slow shutter mode, the shutter speed will automatically slow down in low illumination
conditions to maintain clear video images by extending the exposure time. The feature can
be enabled or disabled.
Backlight Compensation (BLC)
If you focus on an object against strong backlight, the object will be too dark to be seen
clearly. The BLC (Backlight Compensation) function can compensate light to the object in
the front to make it clear, but this causes the over-exposure of the background where the
light is strong.
Wide Dynamic Range (WDR)
The wide dynamic range (WDR) function helps the camera provide clear images even
under back light circumstances. When there are both very bright and very dark areas
simultaneously in the field of view, WDR balances the brightness level of the whole image
and provide clear images with details.
White Balance (WB)
White balance can remove the unrealistic color casts. White balance is the white rendition
function of the camera to adjust the color temperature according to the environment
automatically.
Patrol
A patrol is a memorized series of pre-defined preset function. The scanning speed
between two presets and the dwell time at the preset are programmable.
Pattern
A pattern is a memorized series of pan, tilt, zoom, and preset functions. By default the
focus and iris are in auto status during the pattern is being memorized.
Power Off Memory
The speed dome supports the power off memory capability with the predefined resume
time. It allows the speed dome to resume its previous position after power is restored.
Scheduled Task
A time task is a preconfigured action that can be performed automatically at a specific
date and time. The programmable actions include: auto scan, random scan, patrol
1-8 ,pattern 1-4, preset 1-8,frame scan, panorama scan, tilt scan, day, night, reboot, PT
adjust, Aux Output, etc.
Park Action
This feature allows the speed dome to start a predefined action automatically after a
period of inactivity.
3D Digital Noise Reduction
Comparing with the general 2D digital noise reduction, the 3D digital noise reduction
function processes the noise between two frames besides processing the noise in one
frame. The noise will be much less and the video will be clearer.
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

User Manual of Thermal Bi-spectrum Network Speed dome
4
Chapter 2 Network Connection
Before you start:
If you want to set the network speed dome via a LAN (Local Area Network), please
refer to Section 2.1.
If you want to set the network speed dome via a WAN (Wide Area Network), please
refer to Section 2.2.
2.1 Setting the Network Speed dome over the LAN
Purpose:
To view and configure the speed dome via a LAN, you need to connect the network speed
dome in the same subnet with your computer, and install the SADP or client software to
search and change the IP of the network speed dome.
For the detailed introduction of SADP, please refer to Appendix.
2.1.1 Wiring over the LAN
The following figures show the two ways of cable connection of a network speed dome
and a computer:
Purpose:
To test the network speed dome, you can directly connect the network speed dome to
the computer with a network cable as shown in Figure 2-1.
Refer to the Figure 2-2 to set the network speed dome over the LAN via a switch or a
router.
Network Cable
Figure 2-1 Connecting Directly
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

Network
Speed Dome Switch Internet
NVR
PC
5
User Manual of Thermal Network Speed dome
Figure 2-2 Connecting via a Switch or a Router
2.1.2 Activating the Speed dome
Purpose:
You are required to activate the speed dome first before you can use the speed dome.
Activation via Web Browser, Activation via SADP, and Activation via client software are
supported. In the following sections, activation via web browser and SADP will be taken as
examples. You may refer to the user manual of the speed dome for the details of
activation via client software.
Activation via Web Browser
Steps:
1. Power on the speed dome, and connect the speed dome to the network.
2. Input the IP address into the address bar of the web browser, and click Enter to enter
the activation interface.
The default IP address of the speed dome is 192.168.1.64.
Figure 2-3 Activation Interface(Web)
Create a password and input the password into the password field.
3.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a
strong password of your own choosing (Using a minimum of 8 characters,
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

password.
6
User Manual of Thermal Network Speed dome
including at least three of the following categories: upper case letters, lower
case letters, numbers, and special characters.) in order to increase the security
of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or
weekly can better protect your product.
4. Confirm the password.
5. Click OK to activate the speed dome and enter the live view interface.
Activation via SADP Software
SADP software is used for detecting the online device, activating the device, and resetting
the password.
Get the SADP software from the supplied disk or the official website, and install the SADP
according to the prompts. Follow the steps to activate the speed dome.
Steps:
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select an inactive device.
Figure 2-4 SADP Interface
3. Create a password and input the password in the password field, and confirm the
STRONG PASSWORD RECOMMENDED–We highly recommend you create a
strong password of your own choosing (Using a minimum of 8 characters,
including at least three of the following categories: upper case letters, lower
case letters, numbers, and special characters.) in order to increase the
security of your product. And we recommend you reset your password
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

7
User Manual of Thermal Network Speed dome
regularly, especially in the high security system, resetting the password
monthly or weekly can better protect your product.
4. Click OK to save the password.
You can check whether the activation is completed on the popup window. If activation
failed, please make sure that the password meets the requirement and then try again.
5. Change the device IP address to the same subnet with your computer by either
modifying the IP address manually or checking the checkbox of Enable DHCP.
Figure 2-5 Modify the IP Address
6. Input the password and click Save to activate your IP address modification.
Activation via Client Software
The client software is versatile video management software for multiple kinds of devices.
Get the client software from the supplied disk or the official website, and install the
software according to the prompts. Follow the steps to activate the camera.
Steps:
1. Run the client software and the control panel of the software pops up, as shown in the
figure below.
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

8
User Manual of Thermal Network Speed dome
Figure 2-6 Control Panel
2. Click Device Management to enter the Device Management interface, as shown in the
figure below.
Figure 2-7 Device Management Interface
3. Check the device status from the device list, and select an inactive device.
4. Click Activate to pop up the Activation interface.
5. Create a password and input the password in the password field, and confirm the
password.
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

9
User Manual of Thermal Network Speed dome
STRONG PASSWORD RECOMMENDED–We highly recommend you create a
strong password of your own choosing (Using a minimum of 8 characters,
including at least three of the following categories: upper case letters, lower
case letters, numbers, and special characters.) in order to increase the security
of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or
weekly can better protect your product.
Figure 2-8 Activation Interface
6. Click OK to start activation.
7. Click Modify Netinfo to pop up the Network Parameter Modification interface, as
shown in the figure below.
Figure 2-9 Modifying the Network Parameters
8. Change the device IP address to the same subnet with your computer by either
modifying the IP address manually or checking the checkbox of Enable DHCP.
9. Input the password to activate your IP address modification.
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

10
User Manual of Thermal Network Speed dome
2.2 Setting the Network Speed dome over the WAN
Purpose:
This section explains how to connect the network speed dome to the WAN with a static IP
or a dynamic IP.
2.2.1 Static IP Connection
Before you start:
Please apply a static IP from an ISP (Internet Service Provider). With the static IP address,
you can connect the network speed dome via a router or connect it to the WAN directly.
Connecting the network speed dome via a router
Steps:
1. Connect the network speed dome to the router.
Speed Dome
Network
Cable
Router with Static IP
PC
Network
Cable
Network
Cable
Internet
2. Assign a LAN IP address, the subnet mask and the gateway. Refer to Section 2.1.2 for
detailed IP address configuration of the speed dome.
3. Save the static IP in the router.
4. Set port mapping, E.g., 80, 8000 and 554 ports. The steps for port mapping vary
depending on different routers. Please call the router manufacturer for assistance with
port mapping.
5. Visit the network speed dome through a web browser or the client software over the
internet.
Figure 2-10 Accessing the Speed dome through Router with Static IP
Connecting the network speed dome with static IP directly
You can also save the static IP in the speed dome and directly connect it to the internet
without using a router. Refer to Section 2.1.2 for detailed IP address configuration of the
speed dome.
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

Speed Dome
PC
Network
Cable
Network
Cable
Internet
11
User Manual of Thermal Network Speed dome
Figure 2-11 Accessing the Speed dome with Static IP Directly
2.2.2 Dynamic IP Connection
Before you start:
Please apply a dynamic IP from an ISP. With the dynamic IP address, you can connect the
network speed dome to a modem or a router.
Connecting the network speed dome via a router
Steps:
1. Connect the network speed dome to the router.
2. In the speed dome, assign a LAN IP address, the subnet mask and the gateway. Refer
to Section 2.1.2 for detailed LAN configuration.
3. In the router, set the PPPoE user name, password and confirm the password.
For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (using a
minimum of 8 characters, including upper case letters, lower case letters, numbers
and special characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
4. Set port mapping. E.g. 80, 8000 and 554 ports. The steps for port mapping vary
depending on different routers. Please call the router manufacturer for assistance with
port mapping.
5. Apply a domain name from a domain name provider.
6. Configure the DDNS settings in the setting interface of the router.
7. Visit the speed dome via the applied domain name.
Connecting the network speed dome via a modem
Purpose:
This speed dome supports the PPPoE auto dial-up function. The speed dome gets a public
IP address by ADSL dial-up after the speed dome is connected to a modem. You need to
configure the PPPoE parameters of the network speed dome. Refer to Section 7.1.1
Configuring PPPoE Settings for detailed configuration.
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

12
User Manual of Thermal Network Speed dome
Figure 2-12 Accessing the Speed dome with Dynamic IP
The obtained IP address is dynamically assigned via PPPoE, so the IP address always
changes after rebooting the speed dome. To solve the inconvenience of the dynamic IP,
you need to get a domain name from the DDNS provider (E.g. DynDns.com). Please
follow below steps for normal domain name resolution and private domain name
resolution to solve the problem.
Normal Domain Name Resolution
Figure 2-13 Normal Domain Name Resolution
Steps:
1. Apply a domain name from a domain name provider.
2. Configure the DDNS settings in the DDNS Settings interface of the network speed
dome. Refer to Section 7.1.1 Configuring DDNS Settings for detailed configuration.
3. Visit the speed dome via the applied domain name.
Private Domain Name Resolution
Figure 2-14 Private Domain Name Resolution
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]