HIK VISION DS-TDSB00-EKT/POE/4M User manual

Fall Detecon Radar
User Manual

Legal Informaon
©2023 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and
all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision website ( hps://
www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of
Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH
ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
Fall Detecon Radar User Manual
i

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER
PREVAILS.
Fall Detecon Radar User Manual
ii

Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger
Indicates a hazardous situaon which, if not avoided, will or could
result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if not avoided, could
result in equipment damage, data loss, performance degradaon, or
unexpected results.
Note Provides addional informaon to emphasize or supplement
important points of the main text.
Fall Detecon Radar User Manual
iii

Contents
Chapter 1 Introducon ............................................................................................................... 1
1.1 Product Introducon .............................................................................................................. 1
1.2 Key Feature ............................................................................................................................ 1
Chapter 2 Acvaon and Login ................................................................................................... 2
2.1 Acvaon ............................................................................................................................... 2
2.1.1 Default Informaon ...................................................................................................... 2
2.1.2 Acvate via SADP .......................................................................................................... 2
2.1.3 Acvate via Web Browser ............................................................................................. 3
2.2 Login ...................................................................................................................................... 4
Chapter 3 Radar Detecon ......................................................................................................... 5
3.1 Set Radar Mode ..................................................................................................................... 5
3.2 Set Detecon Parameters ...................................................................................................... 6
Chapter 4 Storage ....................................................................................................................... 7
4.1 Set SDK Listening .................................................................................................................... 7
4.2 Set ISAPI Listening .................................................................................................................. 7
Chapter 5 Network Conguraon ............................................................................................... 8
5.1 Set IP Address ........................................................................................................................ 8
5.2 Set Wi-Fi ............................................................................................................................... 10
5.3 Set Wi-Fi AP ......................................................................................................................... 10
5.4 Connect to Plaorm ............................................................................................................. 11
5.4.1 Connect to OTAP ......................................................................................................... 11
5.4.2 Connect to Hik-Connect .............................................................................................. 12
5.5 Set DDNS .............................................................................................................................. 12
5.6 Set SNMP ............................................................................................................................. 13
5.7 Set IEEE 802.1X .................................................................................................................... 14
5.8 Set Port ................................................................................................................................ 14
Fall Detecon Radar User Manual
iv

Chapter 6 Excepon Alarm ....................................................................................................... 16
Chapter 7 Safety Management ................................................................................................. 17
7.1 Manage User ........................................................................................................................ 17
7.2 Enable User Lock .................................................................................................................. 17
7.3 Install Authorized Cercate ................................................................................................ 18
7.4 Create and Install Self-signed Cercate ............................................................................. 18
7.5 Set SSH ................................................................................................................................. 18
7.6 Set IP Address Filtering ........................................................................................................ 19
7.7 Set Timeout Logout .............................................................................................................. 19
7.8 Set Password Validity Period ................................................................................................ 19
Chapter 8 Maintenance ............................................................................................................ 21
8.1 View Device Informaon ...................................................................................................... 21
8.2 Log ....................................................................................................................................... 21
8.2.1 Enable System Log Service .......................................................................................... 21
8.2.2 Enable Log According to Module ................................................................................ 21
8.3 Upgrade ............................................................................................................................... 22
8.4 Reboot ................................................................................................................................. 22
8.5 Restore Parameters .............................................................................................................. 22
8.6 Set Serial Port ....................................................................................................................... 23
8.7 Synchronize Time ................................................................................................................. 23
8.8 Set DST ................................................................................................................................. 24
8.9 Export Parameters ............................................................................................................... 24
8.10 Import Conguraon File ................................................................................................... 25
8.11 Export Debug File ............................................................................................................... 25
8.12 Export Diagnosis Informaon ............................................................................................ 26
Appendix A. Communicaon Matrix and Device Command ...................................................... 27
Fall Detecon Radar User Manual
v

Chapter 1 Introducon
1.1 Product Introducon
Fall detecon radar (hereinaer referred to as "device") adopts FMCW, MIMO, beamforming, KNN,
and other technologies. It can obtain target informaon, including person locaon, speed, posture,
etc., and can provide non-contact fall detecon.
1.2 Key Feature
●Supports to follow the target and output the real-me locaon informaon.
●Real-me and non-contact fall detecon. No privacy disclosure.
●Supports to connect to OTAP.
●Supports data transmission via Wi-Fi.
●Small size and easy installaon.
●It can be used to the indoor safety and health monitoring for the elderly people in hospitals,
nursing homes, and other scenarios.
Fall Detecon Radar User Manual
1

Chapter 2 Acvaon and Login
2.1 Acvaon
For the rst-me access, you need to acvate the device by seng an admin password. No
operaon is allowed before acvaon. The device supports mulple acvaon methods, such as
acvaon via SADP soware, web browser, and iVMS-4200 Client.
Note
Refer to the user manual of iVMS-4200 Client for the acvaon via client soware.
2.1.1 Default Informaon
The device default informaon is shown as below.
●Default IP address: 192.168.1.64
●Default user name: admin
2.1.2 Acvate via SADP
SADP is a tool to detect, acvate, and modify the IP address of the device over the LAN.
Before You Start
●Get the SADP soware from the supplied disk or the ocial website ( hp://
www.hikvision.com/ ), and install it according to the prompts.
●The device and the computer that runs the SADP tool should belong to the same network
segment.
The following steps show how to acvate one device and modify its IP address. For batch acvaon
and IP address modicaon, refer to User Manual of SADP for details.
Steps
1. Run the SADP soware and search the online devices.
2. Find and select your device in online device list.
3. Enter a new password (admin password) and conrm the password.
Cauon
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
4. Click Acvate to start acvaon.
Fall Detecon Radar User Manual
2

Figure 2-1 Acvate via SADP
Status of the device becomes Acve aer successful acvaon.
5. Modify IP address of the device.
1) Select the device.
2) Change the device IP address to the same network segment as your computer by either
modifying the IP address manually or checking Enable DHCP (Dynamic Host Conguraon
Protocol).
3) Enter the admin password and click Modify to acvate your IP address modicaon.
2.1.3 Acvate via Web Browser
Use web browser to acvate the device. For the device with the DHCP enabled by default, use
SADP soware or client soware to acvate the device.
Before You Start
Ensure the device and the computer are in the LAN with the same network segment.
Steps
1. Change the IP address of your computer to the same network segment as the device.
2. Open the web browser, and enter the default IP address of the device to enter the acvaon
interface.
3. Create and conrm the admin password.
Fall Detecon Radar User Manual
3

Cauon
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
4. Click OK to complete acvaon.
5. Go to the network sengs interface to modify IP address of the device.
2.2 Login
You can log in to the device via web browser for further operaons such as live view and local
conguraon.
Before You Start
Connect the device to the network directly, or via a switch or a router.
Steps
1. Open the web browser, and enter the IP address of the device to enter the login interface.
2. Enter User Name and Password.
3. Click Login.
4. Download and install appropriate plug-in for your web browser. Follow the installaon prompts
to install the plug-in.
5. Reopen the web browser aer the installaon of the plug-in and repeat steps 1 to 3 to login.
6. Oponal: Click Logout on the upper right corner of the interface to log out of the device.
Fall Detecon Radar User Manual
4