HIK VISION DS-3E15 P Series User manual

Gigabit PoE Switch Client
User Manual

Legal Informaon
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and
all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision website ( hps://
www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of
Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH
ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
Gigabit PoE Switch Client User Manual
i

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Gigabit PoE Switch Client User Manual
ii

Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instrucon manual, may cause harmful
interference to radio communicaons. Operaon of this equipment in a residenal area is likely to
cause harmful interference in which case the user will be required to correct the interference at his
own expense.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with
"CE" and comply therefore with the applicable harmonized European
standards listed under the EMC Direcve 2014/30/EU, the RoHS Direcve
2011/65/EU.
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collecon points.
For more informaon see: hp://www.recyclethis.info .
2006/66/EC (baery direcve): This product contains a baery that cannot be
disposed of as unsorted municipal waste in the European Union. See the
product documentaon for specic baery informaon. The baery is
marked with this symbol, which may include leering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the baery to
your supplier or to a designated collecon point. For more informaon see:
hp://www.recyclethis.info .
Gigabit PoE Switch Client User Manual
iii

Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
Gigabit PoE Switch Client User Manual
iv

Preface
Applicable Models
This manual is applicable to DS-3E15XXP series switches.
Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger
Indicates a hazardous situaon which, if not avoided, will or could
result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if not avoided, could
result in equipment damage, data loss, performance degradaon, or
unexpected results.
Note Provides addional informaon to emphasize or supplement
important points of the main text.
Safety Instrucon
Danger
• This is a class A product and may cause radio interference in which case the user may be
required to take adequate measures.
• Ensure that your devices powered via the PoE port have their shells protected and re-proofed,
because the switches are not compliant with the Limited Power Source (LPS) standard.
• In the use of the product, you must be in strict compliance with the electrical safety regulaons
of the naon and region.
• The socket-outlet shall be installed near the device and shall be easily accessible.
• The device must be connected to an earthed mains socket-outlet.
• Install the device according to the instrucons in this manual.
• indicates hazardous live and the external wiring connected to the terminals requires
installaon by an instructed person.
• Keep body parts away from fan blades. Disconnect the power source during servicing.
• Never place the device in an unstable locaon. The device may fall, causing serious personal
injury or death.
• This device is not suitable for use in locaons where children are likely to be present.
Gigabit PoE Switch Client User Manual
v

• CAUTION: Risk of explosion if the baery is replaced by an incorrect type.
• Improper replacement of the baery with an incorrect type may defeat a safeguard (for
example, in the case of some lithium baery types).
• Do not dispose of the baery into re or a hot oven, or mechanically crush or cut the baery,
which may result in an explosion.
• Do not leave the baery in an extremely high temperature surrounding environment, which may
result in an explosion or the leakage of ammable liquid or gas.
• Do not subject the baery to extremely low air pressure, which may result in an explosion or the
leakage of ammable liquid or gas. Dispose of used baeries according to the instrucons.
Cauon
• CAUTION: Double pole/Neutral fusing. Aer operaon of the fuse, parts of the device that
remain energized might represent a hazard during servicing.
• The device has been designed, when required, modied for connecon to an IT power
distribuon system.
• This device is suitable for mounng on concrete or other non-combusble surface only.
• The venlaon should not be impeded by covering the venlaon openings with items, such as
newspapers, table-cloths, curtains, etc. The openings shall never be blocked by placing the
device on a bed, sofa, rug or other similar surface.
• No naked ame sources, such as lighted candles, should be placed on the device.
• The device shall not be exposed to dripping or splashing and that no objects lled with liquids,
such as vases, shall be placed on the device.
• Burned ngers when handling the cover area of the device. Wait one-half hour aer switching
o before handling the parts.
• CLASS 1 LASER PRODUCT
Gigabit PoE Switch Client User Manual
vi

Contents
Chapter 1 Product Introducon .................................................................................................. 1
Chapter 2 Device Management ................................................................................................... 2
2.1 Acvang Devices .................................................................................................................. 2
2.2 Adding Devices ....................................................................................................................... 3
Chapter 3 Device Status .............................................................................................................. 5
Chapter 4 Typology Display ........................................................................................................ 6
4.1 Relate Operaons .................................................................................................................. 6
4.2 Typology Sengs ................................................................................................................... 7
Chapter 5 Network Conguraon ............................................................................................... 9
Chapter 6 Port Conguraon .................................................................................................... 10
6.1 Aribute Conguraon ........................................................................................................ 10
6.2 PoE Port Conguraon ......................................................................................................... 10
Chapter 7 Link Aggregaon Conguraon ................................................................................. 12
Chapter 8 System Conguraon ................................................................................................ 14
8.1 Device Informaon .............................................................................................................. 14
8.2 User Management ............................................................................................................... 14
8.3 Device Maintenance ............................................................................................................ 15
8.4 Log Management ................................................................................................................. 16
8.5 Security Conguraon ......................................................................................................... 16
Gigabit PoE Switch Client User Manual
vii

Chapter 1 Product Introducon
DS-3E15XXP series switches (hereinaer referred to as "the device") are layer 2 PoE switches,
providing advanced PoE power supply technology on the basis of high-performance access. The
switches support client management, network topology management, link aggregaon, port
management and so on. The switches are suitable for small-scale LAN device access.
Gigabit PoE Switch Client User Manual
1

Chapter 2 Device Management
The device can be congured and managed through iVMS-4200 soware, mainly including network
parameter conguraon, port conguraon, link aggregaon conguraon, network topology
display and so on.
Note
• This chapter will briey introduce the device management through the iVMS-4200 soware. For
other funcons, please refer to User Manual of iVMS-4200 Client Soware.
• All pictures in this manual are for illustraon only, and the specic interface is subject to the
actual interface.
2.1 Acvang Devices
For the inacve devices, you are required to create a password to acvate them before they can be
added to the soware and work properly.
Before You Start
Make sure the device to be acvated is connected to the network and is in the same subnet with
the PC running the client.
Steps
Note
This funcon should be supported by the device.
1. Enter the Device Management page.
2. Click Device tab on the top of the right panel.
3. Click Online Device to show the online device area at the boom of the page.
The searched online devices are displayed in the list.
4. Check the device status (shown on Security Level column) and select an inacve device.
Figure 2-1 Online Inacve Device
5. Click Acvate to open the Acvaon dialog.
6. Create a password in the password eld, and conrm the password.
Gigabit PoE Switch Client User Manual
2

Cauon
The password strength of the device can be automacally checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
7. Click OK to acvate the device.
2.2 Adding Devices
The client provides various device adding modes including IP/domain, IP segment, cloud P2P, ISUP
protocol, and HiDDNS. The client also supports imporng mulple devices in a batch when there
are large amount of devices to be added. The secon only introduces one mode, namely, adding a
detected online device.
Steps
1. Enter the Device Management module.
2. Click Device tab on the top of the right panel.
3. Click Online Device to show the online device area.
The searched online devices are displayed in the list.
4. Select an online device in the Online Device area, and click Add to open the device adding
window.
Note
For the inacve device, you need to create the password for it before you can add the device
properly. For detailed steps, refer to Acvang Devices .
5. Enter the required informaon.
Name
Enter a descripve name for the device.
IP Address
Enter the device's IP address. The IP address of the device is obtained automacally in this
adding mode.
Port
You can customize the port number. The port number of the device is obtained automacally
in this adding mode.
User Name
Gigabit PoE Switch Client User Manual
3

By default, the user name is admin.
Password
Enter the device password.
Cauon
The password strength of the device can be automacally checked. We highly recommend
you change the password of your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case leers, lower case leers, numbers,
and special characters) in order to increase the security of your product. And we recommend
you change your password regularly, especially in the high security system, changing the
password monthly or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
6. Check Synchronize Time to synchronize the device me with the PC running the client aer
adding the device to the client.
7. Click Add.
Gigabit PoE Switch Client User Manual
4

Chapter 3 Device Status
In the Device Management → Device interface, click to view the device status, port status, PoE
port status, and port stascs.
Figure 3-1 Device Status
Device Status
You can view the device usage, device panel status and port informaon.
Port Status
You can view the bitrate, duplex and ow control of ports.
Port Stascs
You can view the number of bytes sent or received, the number of packets sent or received,
sending or receiving rate, and peak value of sending or receiving rate.
Note
Drag the sliding bar to view all data.
PoE Port Status
You can view the enabling status and output power of dierent ports.
Gigabit PoE Switch Client User Manual
5

Chapter 4 Typology Display
In Typology interface, you can view the relaonships among dierent devices added and congure
the typology.
4.1 Relate Operaons
Select a device added, go to → General Applicaon → Typology to enter the typology display
interface.
Figure 4-1 Typology Display
Interface Descripon
• On the upper-le corner, you can enter another name or IP address of a device to view the
corresponding typology.
• On the upper-right corner, you can view the icon of lines and the meaning of dierent colors,
select two device to show the ash of the signal transmission between them, and export or
refresh the typology.
• On the lower-le corner, you can do the typology sengs and view the ps.
• On the lower-right corner, you can click the icons or scroll your mouse wheel to enlarge or
narrow the typology.
Note
If you enter the typology interface for the rst me, no typology is displayed, please click to
refresh it.
Gigabit PoE Switch Client User Manual
6

Relate Operaons/Icons Descripon
Acons/Icons Operaon Descripon
Double click a device. Show the device type and IP, panel status, and port informaon.
Double click a line. Show transmission rate, port informaon, etc.
Right-click a device. Jump to Device Status interface. For details, see Device Status .
Show the alarm informaon and event informaon, and cancel the alarm.
Jump to Remote Conguraon interface.
Set the device as root node.
Edit the device name.
Select the path and format to export the typology.
Select IPC and current devices to show the ash of the signal transmission
between them.
4.2 Typology Sengs
Steps
1. Click on the lower-le corner to do the typology sengs.
• Set display level: 1 to 10.
• Set upstream bandwidth L1 alarm: 1% to 100%. The line will turn to yellow (busy) when the
bandwidth exceeds the threshold of L1 alarm.
• Set upstream bandwidth L2 alarm: 1% to 100%. The line will turn to red (congeson) when
the bandwidth exceeds the threshold of L2 alarm.
2. Click OK.
Gigabit PoE Switch Client User Manual
7

Figure 4-2 Typology Sengs
Note
Aer changing the typology sengs, you need to click to view the latest typology.
Gigabit PoE Switch Client User Manual
8

Chapter 5 Network Conguraon
In Network interface, you can congure basic parameters as neeeded.
Go to → Network → General to congure NIC type, IPv4 address, subnet mask, default gateway,
MAC address, device port and HTTP port No..
Figure 5-1 Network Conguraon
Note
Aer the IPv4 address is reset, the device IP may not be in the same network segment as the
computer IP of the client, so it cannot be congured and managed. It is recommended to use the
SADP tool to plan the IP address of the device when the device is acvated for the rst me.
Gigabit PoE Switch Client User Manual
9

Chapter 6 Port Conguraon
Select → Port Conguraon to enter the interface.
Note
Dierent devices have dierent funcons, so the actual interface shall prevail.
6.1 Aribute Conguraon
The basic parameters can inuence the working status of ports. Congure the bitrate, duplex, and
ow control, and enable or disable ports according to the actual situaons in the Aribute
Conguraon interface.
Bitrate
The data transmission rate of the port. The rate includes auto, 10 Mbps, 100 Mbps, and 1000
Mpbs. The default is Auto Negoaon. The congurable rate varies with dierent ports.
Duplex
The duplex mode of the port. Only Auto Negoaon is available for the current version.
Flow Control
Enabling the ow control can prevent data loss in data transmission. The default is Enable.
Enable
Enable or disable the port link. Aer you disable the port link, the data of the port stops
transmission, but the power is supplied for other devices.
Note
The rate, duplex, and ow control conguraon of all ports must be the same in the aggregaon
group .
6.2 PoE Port Conguraon
You can enable PoE to supply power for the powered devices (PDs).
Note
Enabling or disabling PoE has no inuences on data transmission of the port.
Gigabit PoE Switch Client User Manual
10

Figure 6-1 PoE Port Conguraon
Gigabit PoE Switch Client User Manual
11

Chapter 7 Link Aggregaon Conguraon
Link aggregaon is used to aggregate physical ports to create a logical channel. The advantages of
link aggregaon are higher transmission rate with wider bandwidth.
Steps
1. Select → Link Aggregaon → Load Balancing Conguraon .
Figure 7-1 Load Balancing Conguraon
Source and Desnaon MAC: Load balancing is performed based on source and desnaon
MAC addresses on all the packets.
2. Select → Link Aggregaon → Aggregaon Group .
Note
Only gigabit ports can be added into aggregaon groups.
3. Click Add.
Figure 7-2 Add Aggregaon Group
Gigabit PoE Switch Client User Manual
12