HIK VISION DS-3E1510P User manual

Gigabit PoE Switch Web
User Manual

Legal Informaon
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and
all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision website ( hps://
www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of
Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH
ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
Gigabit PoE Switch Web User Manual
i

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Gigabit PoE Switch Web User Manual
ii

Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instrucon manual, may cause harmful
interference to radio communicaons. Operaon of this equipment in a residenal area is likely to
cause harmful interference in which case the user will be required to correct the interference at his
own expense.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with
"CE" and comply therefore with the applicable harmonized European
standards listed under the EMC Direcve 2014/30/EU, the RoHS Direcve
2011/65/EU.
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collecon points.
For more informaon see: hp://www.recyclethis.info .
2006/66/EC (baery direcve): This product contains a baery that cannot be
disposed of as unsorted municipal waste in the European Union. See the
product documentaon for specic baery informaon. The baery is
marked with this symbol, which may include leering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the baery to
your supplier or to a designated collecon point. For more informaon see:
hp://www.recyclethis.info .
Gigabit PoE Switch Web User Manual
iii

Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
Gigabit PoE Switch Web User Manual
iv

Preface
Applicable Models
This manual is applicable to DS-3E15XXP series switch and guides you to complete the
conguraon and operaon of the switch.
About the Default
• Default administrator account: admin.
• Default IP address: 192.168.1.64.
Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger
Indicates a hazardous situaon which, if not avoided, will or could
result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if not avoided, could
result in equipment damage, data loss, performance degradaon, or
unexpected results.
Note Provides addional informaon to emphasize or supplement
important points of the main text.
Safety Instrucon
Danger
• This is a class A product and may cause radio interference in which case the user may be
required to take adequate measures.
• In the use of the product, you must be in strict compliance with the electrical safety regulaons
of the naon and region.
• The socket-outlet shall be installed near the device and shall be easily accessible.
• The device must be connected to an earthed mains socket-outlet.
• Install the device according to the instrucons in this manual.
• indicates hazardous live and the external wiring connected to the terminals requires
installaon by an instructed person.
Gigabit PoE Switch Web User Manual
v

• Keep body parts away from fan blades. Disconnect the power source during servicing.
• Never place the device in an unstable locaon. The device may fall, causing serious personal
injury or death.
• This device is not suitable for use in locaons where children are likely to be present.
• CAUTION: Risk of explosion if the baery is replaced by an incorrect type.
• Improper replacement of the baery with an incorrect type may defeat a safeguard (for
example, in the case of some lithium baery types).
• Do not dispose of the baery into re or a hot oven, or mechanically crush or cut the baery,
which may result in an explosion.
• Do not leave the baery in an extremely high temperature surrounding environment, which may
result in an explosion or the leakage of ammable liquid or gas.
• Do not subject the baery to extremely low air pressure, which may result in an explosion or the
leakage of ammable liquid or gas. Dispose of used baeries according to the instrucons.
Cauon
• CAUTION: Double pole/Neutral fusing. Aer operaon of the fuse, parts of the device that
remain energized might represent a hazard during servicing.
• The device has been designed, when required, modied for connecon to an IT power
distribuon system.
• This device is suitable for mounng on concrete or other non-combusble surface only.
• The venlaon should not be impeded by covering the venlaon openings with items, such as
newspapers, table-cloths, curtains, etc. The openings shall never be blocked by placing the
device on a bed, sofa, rug or other similar surface.
• No naked ame sources, such as lighted candles, should be placed on the device.
• The device shall not be exposed to dripping or splashing and that no objects lled with liquids,
such as vases, shall be placed on the device.
• Burned ngers when handling the cover area of the device. Wait one-half hour aer switching
o before handling the parts.
• CLASS 1 LASER PRODUCT
Gigabit PoE Switch Web User Manual
vi

Contents
Chapter 1 Introducon ............................................................................................................... 1
Chapter 2 Acvaon and Login ................................................................................................... 2
Chapter 3 Device Management ................................................................................................... 4
Chapter 4 Switch Conguraon .................................................................................................. 7
4.1 Port Conguraon .................................................................................................................. 7
4.1.1 Aribute Conguraon ................................................................................................. 7
4.1.2 Port Mirroring ............................................................................................................... 8
4.1.3 Port Rate-Liming ......................................................................................................... 9
4.1.4 Storm Control Conguraon ....................................................................................... 10
4.1.5 Long-Range Mode Conguraon ................................................................................ 11
4.2 Link Aggregaon Conguraon ............................................................................................ 12
4.3 VLAN Conguraon .............................................................................................................. 14
4.3.1 Add a VLAN ................................................................................................................. 14
4.3.2 Congure a Port .......................................................................................................... 15
4.4 QoS Conguraon ................................................................................................................ 16
4.5 SNMP Conguraon ............................................................................................................. 18
4.5.1 SNMP Proxy Sengs ................................................................................................... 19
4.5.2 SNMP Trap Sengs ..................................................................................................... 19
4.6 STP Conguraon ................................................................................................................. 20
4.6.1 Global Conguraon ................................................................................................... 20
4.6.2 STP Port Conguraon ................................................................................................ 22
4.6.3 STP Status View ........................................................................................................... 24
4.7 PoE Management ................................................................................................................. 24
Chapter 5 System Management ................................................................................................ 26
5.1 Time Sync ............................................................................................................................. 26
5.2 Device Operaon ................................................................................................................. 26
Gigabit PoE Switch Web User Manual
vii

5.3 Conguraon File Export ..................................................................................................... 27
5.4 Conguraon File Import ..................................................................................................... 28
5.5 Device Upgrade .................................................................................................................... 28
5.6 Log Management ................................................................................................................. 28
5.7 Network Diagnoscs ............................................................................................................ 29
5.8 User Management ............................................................................................................... 30
5.9 Security Management .......................................................................................................... 31
Gigabit PoE Switch Web User Manual
viii

Chapter 1 Introducon
DS-3E15XXP series switches are layer 2 PoE switches, providing advanced PoE power supply
technology and gigabit networks design on the basis of high-performance access. The switches
support Web management, and various layer 2 management protocols such as STP/RSTP, VLAN,
link aggregaon, SNMP, QoS to ensure stable data upload.
Gigabit PoE Switch Web User Manual
1

Chapter 2 Acvaon and Login
For the rst me usage, you must acvate the switch and congure the password.
Before You Start
The computer and the switch are on the same network segment.
Steps
Note
Take DS-3E1510P as an example. All gures in this manual are for illustraon purpose only.
1. Enter the default IP 192.168.1.64 in the browser address bar.
Figure 2-1 Acvaon
Note
You are recommended to use the newest version of the following browsers: IE 10+, Edge, and
Chrome 31+.
2. Congure the password and conrm it.
3. Click OK.
Go to the login page.
Figure 2-2 Login
4. Enter the User Name and Password, and click Log In.
5. Oponal: Change the network conguraon.
Gigabit PoE Switch Web User Manual
2

1) Go to System Management → Network Conguraon .
Figure 2-3 Network Conguraon
2) Change the IP address, mask address, the gateway address, DNS and alternave DNS as
needed. You can log in to the switch with the new IP address next me.
Note
You are recommended to change the network conguraon to beer manage the switch.
Gigabit PoE Switch Web User Manual
3

Chapter 3 Device Management
Aer logging in to the Web, you can go to Device Status to view the device status, including the
device informaon, working status, port status, port stascs, and PoE status.
Device Informaon
Figure 3-1 Device Informaon
•Management VLAN: The management VLAN is VLAN 1 by default that cannot be edited.
•MAC Address Aging Time: Aging me for MAC address table entries. The default is 300 seconds
that cannot be edited.
Gigabit PoE Switch Web User Manual
4

Working Status
Figure 3-2 Working Status
View the device running me, memory usage, and CPU usage.
Port Status
Figure 3-3 Port Status
View the connecon status, rate, duplex, and ow control of all ports.
Port Stascs
Figure 3-4 Port Stascs
Gigabit PoE Switch Web User Manual
5

•Refreshing Rate: 10 sec, 30 sec, 60 sec, and Manually Refresh is available.
•Refresh: When you choose Manually Refresh, you can click Refresh to refresh the stascs.
•Reset: You can click Reset to clear all the stascs.
PoE Status
Figure 3-5 PoE Status
View the complete appliance PoE status and the output power of each PoE port.
Gigabit PoE Switch Web User Manual
6

Chapter 4 Switch Conguraon
4.1 Port Conguraon
4.1.1 Aribute Conguraon
The basic parameters can inuence the working status of ports. Congure the parameters
according to the actual situaon.
Steps
1. Go to Switch Conguraon → Basic Conguraon → Port Conguraon → Aribute
Conguraon .
Figure 4-1 Port Aribute Conguraon
2. Congure the parameters.
Speed
The speed of data transmission of the port.
• PoE port: The default is auto.
• SFP ber opcal port: The default is auto that cannot be edited.
Duplex
The duplex mode of the port.
• PoE port: The default is auto that cannot be edited.
• SFP ber opcal port: The default is auto that cannot be edited.
Flow Control
Enabling the ow control can prevent data loss in data transmission.
Gigabit PoE Switch Web User Manual
7

Enable
Enable or disable the port link.
3. Click Save to complete the conguraon.
4.1.2 Port Mirroring
Port mirroring monitors network trac by sending copies of all incoming and outgoing packets
from one port to a mirroring port.
Steps
1. Go to Switch Conguraon → Basic Conguraon → Port Conguraon → Port Mirroring .
Figure 4-2 Port Mirroring
2. Check Enable of Port Mirroring.
3. Congure the parameters according to the actual situaon.
Table 4-1 Parameters of Port Mirroring
Parameter Descripon
Mirror Port Surveillance port.
Gigabit PoE Switch Web User Manual
8

Parameter Descripon
You can only set one port as the mirror port.
Mirror Source The port that is under surveillance.
You can set one or more ports as the mirror source.
Mirror Direcon Surveillance direcon.
•Disable Mirror: The port is not under surveillance.
•Inbound: The inbound data of the port is under
surveillance.
•Outbound: The outbound data of the port is under
surveillance.
•Inbound and Outbound: Both inbound and
outbound data of the port are under surveillance.
4. Click Save to complete the port mirroring conguraon.
4.1.3 Port Rate-Liming
Congure the port sending and receiving rate according to the actual situaon.
Steps
1. Go to Switch Conguraon → Basic Conguraon → Port Conguraon → Port Rate-Liming .
Figure 4-3 Port Rate-Liming
2. Congure the parameters.
Gigabit PoE Switch Web User Manual
9

Table 4-2 Parameters of Port Rate-Liming
Parameter Descripon
Sending Rate-Liming •Rate-Liming: The data sending rate of the
port is limited.
•No Rate-Liming: The data sending rate of
the port is not limited.
Sending Rate-Liming Value Only editable when the sending rate of the
port is limited.
The range is from 1 to 1000 Mbps.
Receiving Rate-Liming •Rate-Liming: The data receiving rate of the
port is limited.
•No Rate-Liming: The data receiving rate of
the port is not limited.
Receiving Rate-Liming Value Only editable when the receiving rate of the
port is limited.
The range is from 1 to 1000 Mbps.
3. Click Save to complete the conguraon.
4.1.4 Storm Control Conguraon
Storm control prevents the ports from being disrupted by a broadcast, mulcast, or unknown
unicast storm. Errors in the protocol-stack implementaon, or mistakes in network conguraon,
can cause a storm. The storm congests the network and degrades the network performance.
The packets passing from the port will be determined by the storm control if they are unknown
unicast, mulcast, or broadcast. When the packets number exceeds the threshold, the incoming
data is dropped.
Steps
1. Go to Switch Conguraon → Basic Conguraon → Port Conguraon → Storm Control .
Gigabit PoE Switch Web User Manual
10

Figure 4-4 Storm Control
2. Select the port on which you want to enable storm control. Congure Storm Control as on.
3. Congure Storm Control Mode as Broadcast, Mulcast, or Unknown Unicast. The threshold
applies to the chosen mode.
4. Congure the number of frames in Mbps that you want the port to handle in Rate Threshold.
5. Click Save to complete the conguraon.
4.1.5 Long-Range Mode Conguraon
When long-range mode is enabled, the transmission distance of the port can reach 300 meters,
and the rate is 10 Mbps.
Steps
1. Go to Switch Conguraon → Basic Conguraon → Port Conguraon → Long-Range Mode .
Gigabit PoE Switch Web User Manual
11