HIK VISION DS-3E2300P Series User manual

I
DS-3E2300P Series Ethernet Switch
WEB Configuration
User Manual
UD03706B

WEB Configuration of DS-3E2300P Series Ethernet Switch
[ 选取日期 ]
II
User Manual
COPYRIGHT ©2016 Hangzhou Hikvision Digi al Technology Co., L d.
ALL RIGHTS RESERVED.
Any and all informa ion, including, among o hers, wordings, pic ures, graphs are he proper ies of Hangzhou Hikvision
Digi al Technology Co., L d. or i s subsidiaries (hereinaf er referred o be “Hikvision”). This user manual (hereinaf er
referred o be “ he Manual”) canno be reproduced, changed, ransla ed, or dis ribu ed, par ially or wholly, by any
means, wi hou he prior wri en permission of Hikvision. Unless o herwise s ipula ed, Hikvision does no make any
warran ies, guaran ees or represen a ions, express or implied, regarding o he Manual.
About this Manual
This Manual is applicable o DS-3E2300P Series E herne Swi ch.
The Manual includes ins ruc ions for using and managing he produc . Pic ures, char s, images and all o her
informa ion hereinaf er are for descrip ion and explana ion only. The informa ion con ained in he Manual is subjec o
change, wi hou no ice, due o firmware upda es or o her reasons. Please find he la es version in he company
websi e (h p://overseas.hikvision.com/en/).
Please use his user manual under he guidance of professionals.
Trademarks Ackno ledgement
and o her Hikvision’s rademarks and logos are he proper ies of Hikvision in various jurisdic ions. O her
rademarks and logos men ioned below are he proper ies of heir respec ive owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL,
OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.
HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER
DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY
RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE
USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT
BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

WEB Configuration of DS-3E2300P Series Ethernet Switch
[ 选取日期 ]
III
Regulatory Information
FCC Information
Please ake a en ion ha changes or modifica ion no expressly approved by he par y responsible for compliance
could void he user’s au hori y o opera e he equipmen .
FCC compliance: This equipmen has been es ed and found o comply wi h he limi s for a Class A digi al device,
pursuan o par 15 of he FCC Rules. These limi s are designed o provide reasonable pro ec ion agains harmful
in erference when he equipmen is opera ed in a commercial environmen . This equipmen genera es, uses, and can
radia e radio frequency energy and, if no ins alled and used in accordance wi h he ins ruc ion manual, may cause
harmful in erference o radio communica ions. Opera ion of his equipmen in a residen ial area is likely o cause
harmful in erference in which case he user will be required o correc he in erference a his own expense.
FCC Conditions
This device complies wi h par 15 of he FCC Rules. Opera ion is subjec o he following wo condi ions:
1. This device may no cause harmful in erference.
2. This device mus accep any in erference received, including in erference ha may cause undesired opera ion.
EU Conformity Statement
This produc and - if applicable - he supplied accessories oo are marked wi h "CE" and comply herefore
wi h he applicable harmonized European s andards lis ed under he EMC Direc ive 2014/30/EU, he LVD
Direc ive 2014/35/EU, he RoHS Direc ive 2011/65/EU.
2012/19/EU (WEEE direc ive): Produc s marked wi h his symbol canno be disposed of as unsor ed
municipal was e in he European Union. For proper recycling, re urn his produc o your local supplier
upon he purchase of equivalen new equipmen , or dispose of i a designa ed collec ion poin s. For more
informa ion see: www.recycle his.info
2006/66/EC (ba ery direc ive): This produc con ains a ba ery ha canno be disposed of as unsor ed
municipal was e in he European Union. See he produc documen a ion for specific ba ery informa ion.
The ba ery is marked wi h his symbol, which may include le ering o indica e cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, re urn he ba ery o your supplier or o a designa ed collec ion poin . For more
informa ion see: www.recycle his.info
Industry Canada ICES-003 Compliance
This device mee s he CAN ICES-3 (A)/NMB-3(A) s andards requiremen s.

WEB Configuration of DS-3E2300P Series Ethernet Switch
[ 选取日期 ]
IV
Table of Contents
Chapter 1 Configuration Preparation .......................................................................................... 1
1.1 HTTP Configura ion ............................................................................................................. 1
1.1.1 Choosing he Promp Language ................................................................................. 1
1.1.2 Logging in o he Swi ch ............................................................................................. 1
1.1.3 Se ing he HTTP Por ................................................................................................ 5
1.1.4 Enabling he HTTP service ......................................................................................... 5
1.1.5 Se ing he HTTP Access Mode .................................................................................. 5
1.1.6 Se ing he Maximum Number of VLAN En ries Displayed on a Web Page ................. 5
1.1.7 Se ing he Maximum Number of Mul icas En ries Displayed on a Web
Page ................................................................................................................................... 6
1.2 HTTPS Configura ion ........................................................................................................... 6
1.2.1 Se ing he HTTP Access Mode .................................................................................. 6
1.2.2 Se ing he HTTPS Por .............................................................................................. 6
Chapter 2 Accessing the S itch through HTTP ............................................................................. 8
2.1 Accessing he Swi ch hrough HTTP ..................................................................................... 8
2.1.1 Ini ially Accessing he Swi ch ..................................................................................... 8
2.1.2 Upgrading o he Web-Suppor ed Version ................................................................. 9
2.2 Accessing a Swi ch hrough Secure Links ............................................................................. 9
2.3 In roduc ion of Web In erface ........................................................................................... 10
2.3.1 Top Con rol Bar ....................................................................................................... 10
2.3.2 Naviga ion Bar ......................................................................................................... 11
2.3.3 Configura ion Area .................................................................................................. 12
2.3.4 Configura ion Area .................................................................................................. 12
Chapter 3 Basic Configuration ................................................................................................... 13
3.1 Hos name Configura ion ................................................................................................... 13
3.2 Time Managemen ............................................................................................................ 13
Chapter 4 Configuration of the Physical Interface ...................................................................... 15
4.1 Configuring Por Descrip ion ............................................................................................. 15
4.2 Configuring he A ribu es of he Por ............................................................................... 15
4.3 Ra e Limi .......................................................................................................................... 15
4.4 Por Mirror ........................................................................................................................ 16
4.5 Keepalive De ec ion .......................................................................................................... 16
4.6 Por securi y ...................................................................................................................... 16
4.6.1 IP Binding Configura ion .......................................................................................... 16

WEB Configuration of DS-3E2300P Series Ethernet Switch
[ 选取日期 ]
V
4.6.2 MAC Binding Configura ion ..................................................................................... 17
4.6.3 Se ing he S a ic MAC Fil ra ion Mode ................................................................... 17
4.6.4 S a ic MAC Fil ra ion En ries .................................................................................... 17
4.6.5 Se ing he Dynamic MAC Fil ra ion Mode .............................................................. 17
4.7 S orm Con rol .................................................................................................................... 18
4.7.1 Broadcas s orm con rol .......................................................................................... 18
4.7.2 Mul icas S orm Con rol .......................................................................................... 18
4.7.3 Unknown Unicas S orm Con rol ............................................................................. 18
4.8 Por Pro ec Group Configura ion ...................................................................................... 18
4.8.1 Por Pro ec Group Lis ............................................................................................ 19
4.8.2 Por Pro ec Group In erface Configura ion ............................................................. 19
4.9 POE Managemen ............................................................................................................. 19
4.9.1 POE Global Configura ion ........................................................................................ 19
4.9.2 POE Global Real ime Info ........................................................................................ 20
4.9.3 POE In erface Lis .................................................................................................... 20
4.9.4 POE Por Policy Power ............................................................................................. 21
4.9.5 POE In erface Power Lis ......................................................................................... 21
4.9.6 POE Por O her Info ................................................................................................. 21
Chapter 5 Layer-2 Configuration ............................................................................................... 22
5.1 VLAN Configura ion ........................................................................................................... 22
5.1.1 VLAN Lis ................................................................................................................. 22
5.1.2 VLAN Configura ion ................................................................................................. 22
5.2 GVRP Configura ion ........................................................................................................... 23
5.2.1 GVRP Global A ribu e Configura ion ....................................................................... 23
5.2.2 GVRP Por A ribu e Configura ion .......................................................................... 23
5.3 STP Configura ion .............................................................................................................. 23
5.3.1 STP S a us Informa ion ............................................................................................ 23
5.3.2 Configuring he A ribu es of he STP Por ............................................................... 24
5.4 IGMP-Snooping Configura ion ........................................................................................... 24
5.4.1 IGMP-Snooping Configura ion ................................................................................. 24
5.4.2 IGMP-Snooping VLAN Lis ....................................................................................... 25
5.4.3 S a ic Mul icas Address .......................................................................................... 26
5.4.4 Mul icas Lis ........................................................................................................... 26
5.5 Se ing S a ic ARP .............................................................................................................. 26
5.6 S a ic MAC Configura ion ...................................................................................................27
5.7 LLDP Configura ion ............................................................................................................ 28

WEB Configuration of DS-3E2300P Series Ethernet Switch
[ 选取日期 ]
VI
5.7.1 Configuring he Global A ribu es of LLDP ............................................................... 28
5.7.2 Configuring he A ribu es of he LLDP Por ............................................................. 28
5.8 DDM Configura ion ........................................................................................................... 29
5.9 Link Aggrega ion Configura ion ......................................................................................... 29
5.9.1 Por Aggrega ion Configura ion ............................................................................... 29
5.9.2 Configuring Load Balance of Por Aggrega ion Group .............................................. 30
5.10 EAPS Ring Pro ec ion Configura ion ................................................................................. 30
5.10.1 EAPS Ring Lis ........................................................................................................ 30
5.10.2 EAPS Ring Configura ion ........................................................................................ 31
5.11 MEAPS Configura ion ...................................................................................................... 32
5.11.1 MEAPS Ring Configura ion ..................................................................................... 32
5.11.2 MEAPS Ring Configura ion ..................................................................................... 32
5.12 Backup Link Pro ocol Configura ion ................................................................................. 33
5.12.1 Backup Link Pro ocol Global Configura ion ............................................................ 33
5.12.2 Backup Link Pro ocol In erface Configura ion ........................................................ 34
5.13 MTU Configura ion .......................................................................................................... 34
5.14 PDP Configura ion ........................................................................................................... 35
5.14.1 Configuring he Global A ribu es of PDP ............................................................... 35
5.14.2 Configuring he A ribu es of he PDP Por ............................................................ 35
Chapter 6 Layer-3 Configuration ............................................................................................... 36
6.1 Vlan in erface configura ion .............................................................................................. 36
6.2 Se ing he S a ic Rou e ..................................................................................................... 36
Chapter 7 Advanced Configuration ........................................................................................... 38
7.1 QoS Configura ion ............................................................................................................. 38
7.1.1 Configuring QoS Por ............................................................................................... 38
7.1.2 Global QoS Configura ion ........................................................................................ 38
7.2 IP Access Con rol Lis ......................................................................................................... 39
7.2.1 Se ing he Name of he IP Access Con rol Lis ......................................................... 39
7.2.2 Se ing he Rules of he IP Access Con rol Lis .......................................................... 39
7.2.3 Applying he IP Access Con rol Lis .......................................................................... 40
7.3 MAC Access Con rol Lis .................................................................................................... 41
7.3.1 Se ing he Name of he IP Access Con rol Lis ......................................................... 41
7.3.2 Se ing he Rules of he MAC Access Con rol Lis ..................................................... 41
7.3.3 Applying he MAC Access Con rol Lis ...................................................................... 42
Chapter 8 Net ork Management Configuration ........................................................................ 43
8.1 SNMP Configura ion .......................................................................................................... 43

WEB Configuration of DS-3E2300P Series Ethernet Switch
[ 选取日期 ]
VII
8.1.1 SNMP Communi y Managemen ............................................................................. 43
8.1.2 SNMP Hos Managemen ........................................................................................ 43
8.2 RMON ............................................................................................................................... 44
8.2.1 RMON S a is ic Informa ion Configura ion .............................................................. 44
8.2.2 RMON His ory Informa ion Configura ion ............................................................... 44
8.2.3 RMON Alarm Informa ion Configura ion ................................................................. 45
8.2.4 RMON Even Configura ion ..................................................................................... 46
Chapter 9 Diagnosis Tools ......................................................................................................... 47
Chapter 10 System Management .............................................................................................. 48
10.1 User Managemen ........................................................................................................... 48
10.1.1 User Lis ................................................................................................................ 48
10.1.2 Es ablishing a New User ........................................................................................ 48
10.1.3 User Group Managemen ...................................................................................... 49
10.1.4 Password Rule Managemen ................................................................................. 50
10.1.5 Au hen ica ion Rule Managemen ......................................................................... 50
10.1.6 Au horiza ion Rule Managemen ........................................................................... 51
10.2 Log Managemen ............................................................................................................ 51
10.3 Managing he Configura ion Files .................................................................................... 52
10.3.1 Expor ing he Configura ion Informa ion ............................................................... 52
10.3.2 Impor ing he Configura ion Informa ion .............................................................. 53
10.4 Sof ware Managemen .................................................................................................... 53
10.4.1 Backup Sys em Sof ware ....................................................................................... 53
10.4.2 Upda e Sys em Sof ware ....................................................................................... 54
10.5 Reboo ing he Device ...................................................................................................... 54

WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[ 选取日期 ]
1
Cha ter 1 Configuration Pre aration
1.1 HTTP Configuration
Swi ch configura ion can be conduc ed no only hrough command lines and SNMP bu
also hrough Web browser. The swi ches suppor he HTTP configura ion, he abnormal
packe imeou configura ion, and so on.
1.1.1 Choosing the Prom t Language
Up o now, swi ches suppor wo languages, ha is, English and Chinese, and he wo
languages can be swi ched over hrough he following command.
Command Purpose
[no] ip h p language { english} Se s he promp language of Web
configura ion o English.
1.1.2 Logging into the Switch
1.1.2.1 Via Web Browser
1. Connec compu er o a swi ch console por wi h a serial cable.
2. Use a elne clien (e.g., PuTTY) o inser he required commands.
1) Log in via config mode.
2) Crea e a local accoun wi h he following creden ials.
- User Name: admin
- Password: admin
NOTE: For help, use he “?” command.
3) Open h p service.

WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[ 选取日期 ]
2
4) Qui he elne clien .
3. Use he In erne Explorer Web browser o go o he following URL: 192.168.0.1
4. Log in o he Web in erface wi h he creden ials crea ed in S ep 2, above.

WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[ 选取日期 ]
3
1.1.2.2 Via SSH
To access he swi ch via SSH, do he following.
1. Connec compu er o a swi ch console por wi h a serial cable.
2. Use a elne clien (e.g., PuTTY) and selec “SSH” op ion o inser he required
commands.
1) Log in via config mode.
2) Crea e a local accoun wi h he following creden ials.
- User Name: admin
- Password: admin
NOTE: For help, use he “?” command.
3) Config aaa au hen ica ion. Here we se an au hen ica ion me hod named
“Remo e,” and use local username o au hen ica e.
4) Se ssh au hen ica e by me hod we crea ed.
5) Se “enable” password, and ac iva e “enable” mode in SSH connec ion.
6) Open he ssh func ion.

WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[ 选取日期 ]
4
1.1.2.3 Via Telnet
To access he swi ch using elne , do he following.
1. Connec compu er o a swi ch console por wi h a serial cable.
2. Use a elne clien (e.g., PuTTY) and inser “Telne ” op ion o inser he required
commands.
1) Log in via config mode.
2) Crea e a local accoun wi h he following creden ials.
- User Name: admin
- Password: admin
NOTE: For help, use he “?” command.
3) Config aaa au hen ica ion. Here we se an au hen ica ion me hod named
“Remo e,” and use local user name o au hen ica e.
4) On he config line, se he elne login au h me hod o “Remo e.”
5) Se “enable” password, and ac iva e “enable” mode in he SSH connec ion.

WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[ 选取日期 ]
5
6) Open he elne func ion.
1.1.3 Setting the HTTP Port
Generally, he HTTP por is por 80 by defaul , and users can access a swi ch by en ering
he IP address direc ly; however, swi ches also suppor users o change he service por
and af er he service por is changed you have o use he IP address and he changed por
o access swi ches. For example, if you se he IP address and he service por o
192.168.1.3 and 1234 respec ively, he HTTP access address should be changed o h p://
192.168.1.3:1234. You’d be er no use o her common pro ocols’ por s (such as f p-20,
elne -23, dns-53, snmp-161) so ha access collision should no happen. Because he
por s used by a lo of pro ocols are hard o remember, you’d be er use por IDs following
por 1024.
Command Purpose
ip h p por { por Number } Se ing he HTTP Por
1.1.4 Enabling the HTTP service
Swi ches suppor o con rol he HTTP access. Only when he HTTP service is enabled can
HTTP exchange happen be ween swi ch and PC and, when he HTTP service is closed,
HTTP exchange s ops.
Command Purpose
ip h p server Enabling he HTTP service
1.1.5 Setting the HTTP Access Mode
You can access a swi ch hrough wo access modes: HTTP access and HTTPS access, and
you can use he following command o se he access mode o HTTP.
Command Purpose
ip h p h p-access enable Se ing he HTTP Access Mode
1.1.6 Setting the Maximum Number of VLAN Entries
Dis layed on a Web Page
A swi ch suppor s a mos 4094 VLANs and in mos cases Web only displays par s of
VLANs, ha is, hose VLANs users wan o see. You can use he following command o se
he maximum number of VLANs. The defaul maximum number of VLANs is 100.

WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[ 选取日期 ]
6
Command Purpose
ip h p web max-vlan
{ max-vlan }
Se s he maximum number of VLAN
en ries displayed in a web page.
1.1.7 Setting the Maximum Number of Multicast Entries
Dis layed on a Web Page
A swi ch suppor s a mos 100 mul icas en ries. You can run he following command o
se he maximum number of mul icas en ries and Web hen shows hese mul icas
en ries. The defaul maximum number of mul icas en ries is 15.
Command Purpose
ip h p web igmp-groups
{ igmp-groups }
Se s he maximum number of mul icas
en ries displayed in a web page.
1.2 HTTPS Configuration
In order o improve he securi y of communica ions, swi ches suppor no only he HTTP
pro ocol bu also he HTTPS pro ocol. HTTPS is a securi y-purposed HTTP channel and i is
added o he SSL layer under HTTP.
1.2.1 Setting the HTTP Access Mode
You can run he following command o se he access mode o HTTPS.
Command Purpose
ip h p ssl-access enable Se ing he HTTPS access mode
1.2.2 Setting the HTTPS Port
As he HTTP por , HTTPS has i s defaul service por , por 443, and you also can run he
following command o change i s service por . I is recommended o use hose por s
following por 1024 so as o avoid collision wi h o her pro ocols’ por s.
Parame ers No es:
ip h p secure-por
{portNumber}
Se s he HTTPS por .

WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[ 选取日期 ]
7

WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[ 选取日期 ]
8
Cha ter 2 Accessing the Switch through
HTTP
2.1 Accessing the Switch through HTTP
When accessing he swi ch hrough Web, please make sure ha he applied browser
complies wi h he following requiremen s:
HTML of version 4.0
HTTP of version 1.1
JavaScrip TM of version 1.5
Wha 's more, please ensure ha he main program file, running on a swi ch, suppor s
Web access and your compu er has already connec ed he ne work in which he swi ch is
loca ed.
2.1.1 Initially Accessing the Switch
When he swi ch is ini ially used, you can use he Web access wi hou any ex ra se ings:
S ep 1 Modify he IP address of he ne work adap er and subne mask of your compu er
o 192.168.0.2 and 255.255.255.0 respec ively.
S ep 2 Open he Web browser and en er 192.168.0.1 in he address bar. I is no ed ha
192.168.0.1 is he defaul managemen address of he swi ch.
S ep 3 If he In erne Explorer browser is used, you can see he dialog box as below. Bo h
he original username and he password are “admin”, which is capi al sensi ive.
S ep 4 Af er successful au hen ica ion, he sys ema ic informa ion abou he swi ch will
appear on he IE browser.

WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[ 选取日期 ]
9
2.1.2 U grading to the Web-Su orted Version
If your swi ch is upgraded o he Web-suppor ed version during i s opera ion and he
swi ch has already s ored i s configura ion files, he Web visi canno be direc ly applied
on he swi ch. Perform he following s eps one by one o enable he Web visi on he
swi ch:
S ep 1 Connec he console por of he swi ch wi h he accessory cable, or elne o he
managemen address of he swi ch hrough he compu er.
S ep 2 En er he global configura ion mode of he swi ch hrough he command line, he
DOS promp of which is similar o “Swi ch_config#”.
S ep 3 If he managemen address of he swi ch is no configured, please crea e he VLAN
in erface and configure he IP address.
S ep 4 En er he commandip http server", o enable Web service.
S ep 5 En er heusername o se he user name and password of he swi ch For how o use
his command, refer o he “Securi y Configura ion” sec ion in he user manual.
S ep 6 Af er he above-men ioned s eps are performed, you can en er he address of he
swi ch in he Web browser o access he swi ch.
S ep 7 En er he command rite", o save he curren configura ion o he configura ion
file.
2.2 Accessing a Switch through Secure Links
The da a be ween he WEB browser and he swi ch will no be encryp ed if you access a
swi ch hrough common HTTP. To encryp hese da a, you can use he secure links, which
are based on he secure socke s layer, o access he swi ch.
To do his, you should follow he following s eps:
S ep 1 Connec he console por of he swi ch wi h he accessory cable, or elne o he
managemen address of he swi ch hrough he compu er.
S ep 2 En er he global configura ion mode of he swi ch hrough he command line, he
DOS promp of which is similar o “Swi ch_config#”.
S ep 3 If he managemen address of he swi ch is no configured, please crea e he VLAN
in erface and configure he IP address.
S ep 4 En er he command ip http server", o enable Web service.
S ep 5 En er he username o se he user name and password of he swi ch For how o
use his command, refer o he “Securi y Configura ion” sec ion in he user manual.
S ep 6 Run ip http ssl-access enable o enable he secure link access of he swi ch.
S ep 7 Run no ip http http-access enable o access he swi ch hrough insecure links.

WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[ 选取日期 ]
10
S ep 8 En er he command rite", o save he curren configura ion o he configura ion
file.
S ep 9 Open he WEB browser on he PC ha he swi ch connec s,
en erh ps://192.168.0.1on he address bar (192.168.0.1 s ands for he
managemen IP address of he swi ch)IP address of he swi ch) and hen press he
En er key. Then he swi ch can be accessed hrough he secure links.
2.3 Introduction of Web Interface
The whole Web homepage consis s of he op con rol bar, he naviga ion bar, he
configura ion area and he bo om con rol bar.
2.3.1 To Control Bar
Save All Wri e he curren se ings o he configura ion file of he
device. I is equivalen o he execu ion
ofthe“ rite”command.
The configura ion ha is made hrough Web will no be
promp ly wri en o he configura ion file af er valida ion.
If you click “Save All”, he unsaved configura ion will be
los af er reboo ing.
English The in erface will urn in o he English version.
Chinese The in erface will urn in o he Chinese version.
Logou Exi from he curren login s a e.
Af er you click "logou ", you have o en er he username
and he password again if you wan o con inue he Web
func ion.
In erface panel Displays he figure of in erface panel
Abou Displays he manufac urer informa ion and se s
au o-refresh.
Af er you configure he device, he resul of he previous s ep will appear on he lef side
of he op con rol bar. If error occurs, please check your configura ion and re ry i la er.

WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[ 选取日期 ]
11
2.3.2 Navigation Bar
The con en s shown in he naviga ion bar. The con en s in he naviga ion bar are shown in
a form of lis and are classified according o ypes. By defaul , he lis is loca ed a
“Run ime Info”. If a cer ain i em need be configured, please click he group name and
hen he subi em. For example, o browse he flux of he curren por , you have o click
“In erface S a e" and hen “In erface Flow”.
The limi ed user can only browse he s a e of he device and canno modify he
configura ion of he device. If you log on o he Web wi h limi ed user’s permissions, only
“In erface S a e” will appear.

WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[ 选取日期 ]
12
2.3.3 Configuration Area
The configura ion display area shows he s a e and configura ion of he device. The
con en s of his area can be modified by he clicking of he i ems in he naviga ion bar.
2.3.4 Configuration Area
The configura ion area is o show he con en ha is selec ed in he naviga ion area. The
configura ion area always con ains one or more bu ons, and heir func ions are lis ed in
he following able:
Refresh Refresh he con en shown in he curren configura ion
area.
Apply Apply he modified configura ion o he device.
The applica ion of he configura ion does no mean ha
he configura ion is saved in he configura ion file. To save
he configura ion, you have o click “Save All” on he op
con rol bar.
Rese Means discarding he modifica ion of he shee . The
con en of he shee will be rese ed.
New Crea es a lis i em. For example, you can crea e a VLAN
i em or a new user.
Dele e Dele es an i em in he lis .
Back Go back o he previous-level configura ion page.

WEB Configuration of DS-3E2300P Series Ethernet SwitchEW
[ 选取日期 ]
13
Cha ter 3 Basic Configuration
3.1 Hostname Configuration
Click Basic Config -> Hostname in he naviga ion bar, he Hos name Configura ion page
appears, as shown in he following figure.
The hos name will be displayed in he login dialog box.
The defaul name of he device is “Swi ch”. You can en er he new hos name in he ex
box shown in figure 3 and hen click “Apply”.
3.2 Time Management
Click System Mgr. -> Time Setting, he Time Se ing page appears.
To refresh he clock of he displayed device, click “Refresh”.
In he “Selec Time-Zone” dropdown box selec he ime zone where he device is loca ed.
When you selec “Se Time Manually”, you can se he ime of he device manually. When