Hikmicro HIKMICRO SP Series User manual

Handheld Thermography Camera
HIKMICRO SP Series
User Manual
HIKMICRO SP Series

Handheld Thermography Camera User Manual
i
Legal Information
© 2022 Hangzhou Microimage Software Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version of this Manual at the HIKMICRO website
(http://www.hikmicrotech.com).
Please use this Manual with the guidance and assistance of professionals trained in supporting the
Product.
Trademarks
and other HIKMICRO's trademarks and logos are the properties of
HIKMICRO in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND
"WITH ALL FAULTS AND ERRORS". HIKMICRO MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR
A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKMICRO SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKMICRO WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

Handheld Thermography Camera User Manual
ii
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.

Handheld Thermography Camera User Manual
iii
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU, the RoHS Directive
2011/65/EU
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated collection points. For more
information see: www.recyclethis.info

Handheld Thermography Camera User Manual
iv
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see:www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
1. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired
operation of the device.
1. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes : l'appareil
ne doit pas produire de brouillage, et
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à
l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communication satisfaisante.
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et
votre corps.

Handheld Thermography Camera User Manual
v
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Danger
Indicates a hazardous situation which, if not avoided, will or could
result in death or serious injury.
Caution
Indicates a potentially hazardous situation which, if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Note
Provides additional information to emphasize or supplement
important points of the main text.

Handheld Thermography Camera User Manual
vi
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger
or property loss.
Laws and Regulations
●Use of the product must be in strict compliance with the local electrical safety regulations.
Transportation
●Keep the device in original or similar packaging while transporting it.
●Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need
to return the device to the factory with the original wrapper. Transportation without the
original wrapper may result in damage on the device and the company shall not take any
responsibilities.
●DO NOT drop the product or subject it to physical shock. Keep the device away from magnetic
interference.
Power Supply
●Please purchase the charger by yourself. Input voltage should meet the Limited Power Source
(7.2 VDC, 890 mA) according to the IEC61010-1 standard. Please refer to technical specifications
for detailed information.
●Make sure the plug is properly connected to the power socket.
●DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards
caused by overload.
Battery
●Improper use or replacement of the battery may result in explosion hazard. Replace with the
same or equivalent type only. Dispose of used batteries in conformance with the instructions
provided by the battery manufacturer.
●The built-in battery cannot be dismantled. Please contact the manufacture for repair if
necessary.
●For long-term storage of the battery, make sure it is fully charged every half year to ensure the
battery quality. Otherwise, damage may occur.
●DO NOT charge other battery types with the supplied charger. Confirm there is no flammable
material within 2 m of the charger during charging.
●DO NOT place the battery near heating or fire source. Avoid direct sunlight.
●DO NOT swallow the battery to avoid chemical burns.
●DO NOT place the battery in the reach of children.
●When the device is powered off and the RTC battery is full, the time settings can be kept for 3
months.
●The lithium battery voltage is 7.2 V, and the battery capacity is 4800 mAh.
●The battery is certified by UL2054.

Handheld Thermography Camera User Manual
vii
Maintenance
●If the product does not work properly, please contact your dealer or the nearest service center.
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
●A few device components (e.g., electrolytic capacitor) require regular replacement. The average
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
●Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
●If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the device may be impaired.
●We recommend you send the device back for calibration once a year, and please contact the
local dealer for the information on maintenance points.
●Please notice that the current limit of USB 3.0 PowerShare port may vary with the PC brand,
which is likely to result in incompatibility issue. Therefore it’s advised to use regular USB 3.0 or
USB 2.0 port if the USB device fails to be recognized by PC via USB 3.0 PowerShare port.
Using Environment
●Make sure the running environment meets the requirement of the device. The operating
temperature shall be -20°C to 50°C (-4°F to 122°F), and the operating humidity shall be 95% or
less.
●This device can only be safely used in the region below 2000 meters above the sea level.
●Place the device in a dry and well-ventilated environment.
●DO NOT expose the device to high electromagnetic radiation or dusty environments.
●DO NOT aim the lens at the sun or any other bright light.
●When any laser equipment is in use, make sure that the device lens is not exposed to the laser
beam, or it may burn out.
●The device is suitable for indoor and outdoor uses, but do not expose it in wet conditions.
●The level of protection is IP 54.
●The pollution degree is 2.
Technical Support
The https://www.hikmicrotech.com portal will help you as a HIKMICRO customer to get the most
out of your HIKMICRO products. The portal gives you access to our support team, software and
documentation, service contacts, etc.
Emergency
●If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
power cable, and contact the service center.
Laser Light Supplement Warning
Warning: The laser radiation emitted from the device can cause eye injuries, burning of skin or
inflammable substances. Prevent eyes from direct laser. Before enabling the Light Supplement
function, make sure no human or inflammable substances are in front of the laser lens. The wave

Handheld Thermography Camera User Manual
viii
length is 650 nm, and the power is less than 1 Mw. The laser meets the IEC60825-1:2014 standard.
Laser maintenance: It is not necessary to maintain the laser regularly. If the laser does not work,
the laser assembly needs to be replaced in the factory under warranty. Keep the device power off
when replacing laser assembly. Caution-Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous radiation exposure.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou,
Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various
countries or regions, including without limitation, the United States, European Union, United
Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your
professional legal or compliance expert or local government authorities for any necessary export
license requirements if you intend to transfer, export, re-export the thermal series products
between different countries.

Handheld Thermography Camera User Manual
ix
Contents
Chapter 1 Overview....................................................................................................................1
1.1 Device Description.................................................................................................................1
1.2 Main Function........................................................................................................................1
1.3 Appearance............................................................................................................................3
Chapter 2 Preparation................................................................................................................8
2.1 Charge Device........................................................................................................................8
2.1.1 Charge Device via Cable Interface .............................................................................8
2.1.2 Charge Device via Charging Base...............................................................................8
2.2 Mount Hand Strap.................................................................................................................9
2.3 Change Interchangeable Lens.............................................................................................10
2.4 Tilt Lens and Screen.............................................................................................................12
2.5 Power On/Off ......................................................................................................................13
2.5.1 Set Auto Power-off Duration...................................................................................13
2.6 Operation Method ..............................................................................................................13
2.7 Menu Description................................................................................................................14
Chapter 3 Display Settings........................................................................................................15
3.1 Focus ....................................................................................................................................15
3.1.1 Focus Lens.................................................................................................................15
3.1.2 Laser Assisted Focus.................................................................................................15
3.1.3 Auto Focus ................................................................................................................16
3.1.4 Continuous Autofocus..............................................................................................16
3.1.5 High Temperature Priority.......................................................................................16
3.2 Set Screen Brightness..........................................................................................................17
3.3 Set Display Mode.................................................................................................................17
3.4 Set Palettes..........................................................................................................................18
3.5 Adjust Digital Zoom.............................................................................................................18
3.6 Display OSD Info..................................................................................................................18
Chapter 4 Temperature Measurement......................................................................................20
4.1 Set Thermography Parameters...........................................................................................20

Handheld Thermography Camera User Manual
x
4.1.1 Set Unit .....................................................................................................................21
4.2 Set Temperature Range ......................................................................................................21
4.3 Set Thermography Rule.......................................................................................................22
4.3.1 Set Point Rule ...........................................................................................................22
4.3.2 Set Line Rule .............................................................................................................23
4.3.3 Set Area Rule ............................................................................................................23
4.3.4 Set Temperature Difference Rule............................................................................24
4.3.5 Delete Rules..............................................................................................................25
4.4 Set Temperature Alarm.......................................................................................................25
Chapter 5 Picture and Video.....................................................................................................26
5.1 Capture Picture....................................................................................................................26
5.2 Record Video .......................................................................................................................27
5.3 Manage Albums...................................................................................................................27
5.3.1 Create a New Album ................................................................................................27
5.3.2 Rename an Album....................................................................................................28
5.3.3 Change the Default Saving Album ...........................................................................28
5.3.4 Delete an Album.......................................................................................................28
5.4 View Recorded Files ............................................................................................................28
5.5 Manage Files........................................................................................................................29
5.5.1 Delete a File..............................................................................................................29
5.5.2 Delete Multiple Files ................................................................................................29
5.5.3 Move a File ...............................................................................................................30
5.5.4 Move Multiple Files..................................................................................................30
5.5.5 Add Text Note on File...............................................................................................31
5.5.6 Add Voice Note on File.............................................................................................31
5.6 Export Files ..........................................................................................................................32

Handheld Thermography Camera User Manual
xi
Chapter 6 Distance Detection ...................................................................................................33
Chapter 7 Connect Bluetooth ...................................................................................................34
Chapter 8 Set LED Light ............................................................................................................35
Chapter 9 Cast Screen...............................................................................................................36
Chapter 10 Thermal View APP Connection................................................................................37
10.1 Connect via Wi-Fi...............................................................................................................37
10.2 Connect via Hotspot..........................................................................................................38
Chapter 11 Position Settings.....................................................................................................39
11.1 Enable GPS.........................................................................................................................39
11.2 Set Compass.......................................................................................................................39
Chapter 12 Maintenance..........................................................................................................40
12.1 View Device Information ..................................................................................................40
12.2 Set Date and Time .............................................................................................................40
12.3 Upgrade Device .................................................................................................................40
12.4 Restore Device...................................................................................................................40
Chapter 13 Appendix................................................................................................................41
13.1 Common Material Emissivity Reference ..........................................................................41
13.2 Device Command...............................................................................................................41
13.3 Device Communication Matrix .........................................................................................42
13.4 FAQ.....................................................................................................................................42

Handheld Thermography Camera User Manual
1
Chapter 1 Overview
1.1 Device Description
The handheld thermography camera is a device with both optical images and thermal images. It
can do thermography, distance measurement, video recording, snapshot capturing, alarm, and it
can connect to Wi-Fi, hotspot and Bluetooth. The built-in high-sensitivity IR detector and
high-performance sensor detects the variation of temperature and measure the real-time
temperature. The temperature measurement range is - 20 °C to 650 °C (- 4 °F to 1202 °F) with the
accuracy of ± 2 °C (± 3.6 °F) or 2%. The built-in laser module detects the target distance.
The device is easy to use, and adopts ergonomic design. It is widely applied to substations,
electricity prevention detection of companies, and reconnaissance survey of construction field.
1.2 Main Function
Thermography
Device detects the real-time temperature, and display it on the screen.
Distance Measurement
Device can detect the target distance with the laser light.
Fusion
Device can display fusion of thermal view and optical view.
Palette and Alarm
Device supports multiple palettes, and you can set the palette mode according to the alarm
function.
Client Software Connection
●Mobile Phone: Use HIKMICRO Viewer to see live image, capture, and recording, etc. on your
phone.
HIKMICRO Viewer Android
HIKMICRO Viewer iOS
●PC: Use HIKMICRO Analyzer (https://www.hikmicrotech.com/en/product-c-detail/18) to see live

Handheld Thermography Camera User Manual
2
image, capture, recording, and receive alarm message, etc. on your PC.
Bluetooth
Device can be connected to headset via Bluetooth, and you can hear the voice in the recording or
capture.

Handheld Thermography Camera User Manual
3
1.3 Appearance

Handheld Thermography Camera User Manual
4

Handheld Thermography Camera User Manual
5
Figure 1-1 Appearance
Table 1-1 Button and Interface Description
No.
Description
Function
1
Navigation Button
Menu Mode:
Press , , , and to select parameters.
Press OK to confirm.
Non-Menu Mode:
Press to turn on/off the LED light supplement.
Press and to adjust focus.
2
File Button
Press to enter albums.
3
Back Button
Exit the menu or return to previous menu.
4 & 14
Function Button
Press to use the custom function.
5
Touch Screen
Show the live view interface.
Touch-screen operation.
6
Focus Ring
Adjust lens focal length.
7
Light Sensor
Sense the ambient brightness.
8
Microphone
Used to add voice note.
9
Zoom
Press to zoom in, and press to zoom out.
10
Diopter Adjustment
Wheel
Adjust the dioptric correction for the viewfinder.
11
Capture Button
Press: capture snapshots/stop recording
Hold: start recording

Handheld Thermography Camera User Manual
6
No.
Description
Function
12
Focus Button
Press to start focus.
13
Laser Button
Press: measure the distance with laser once
Hold: measure the distance with laser continuously
15
Hand Strap Attachment
Point
Mount the hand strap.
16 & 34
Neck Strap Attachment
Point
Mount the neck strap.
17
Tripod Mount
Mount the tripod.
18
Viewfinder
View the live view and target in viewfinder mode.
19
Power Button
Press: standby mode/wake up device
Hold: power on/off
20
Display Switch Button
Switch the LCD and the Viewfinder.
21
Eyepiece Plug
Protect the eyepiece.
22
Loudspeaker
Play voice note and voice alarm.
23
Optical Lens
View the optical image.
24
Laser Range Finder
Measure the distance with laser.
25
Supplement Light
Increase ambient brightness in dark environment.
26
Thermal Lens
View the thermal image.
27
Memory Card Slot
Insert the memory card in it.
28
SIM Card Slot
Not Available.
29
Data Exchange
Interface
Charge the device or export files with supplied cable.
30
Indicator
Indicate the charging status of the device.
Solid red: charging normally
Flashing red: charging exception
Solid green: fully charged
31
HDMI Interface
Display the image and menu interface via HDMI output.
32
Battery Compartment
Install the battery in it.
33
Lens Release Button
Unlock the interchangeable lens.

Handheld Thermography Camera User Manual
7
Caution
The laser radiation emitted from the device can cause eye injuries, burning of skin or inflammable
substances. Before enabling the light supplement function, make sure no human or inflammable
substances are in front of the laser lens.

Handheld Thermography Camera User Manual
8
Chapter 2 Preparation
2.1 Charge Device
2.1.1 Charge Device via Cable Interface
Before You Start
Please make sure the battery is installed before charging.
Steps
1. Lift the cover of cable interface.
2. Plug in the cable, and connect the power supply to charge the battery.
Figure 2-1 Charge the Battery via Type-C Cable
2.1.2 Charge Device via Charging Base
Steps
Note
Please charge the device with the cable and power adapter supplied by the manufacturer (or
according to the input voltage from the specifications).
1. Put one or two batteries in the charging base.
2. Connect the supplied charging base to the power supply. The indicator in the middle is green if
it works properly.