Hikmicro M Series User manual

Handheld Thermography Camera
M Series User Manual

Legal Informaon
©2022 Hangzhou Microimage Soware Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and
all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the HIKMICRO website ( hp://
www.hikmicrotech.com ).
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks
and other HIKMICRO's trademarks and logos are the properes of
HIKMICRO in various jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH
ALL FAULTS AND ERRORS". HIKMICRO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKMICRO
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKMICRO SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKMICRO WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
Handheld Thermography Camera M Series User Manual
i

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER
PREVAILS.
Handheld Thermography Camera M Series User Manual
ii

Regulatory Informaon
FCC Compliance Statement
Please take aenon that changes or modicaon not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment. This device complies with
Part 15 of the FCC Rules. Operaon is subject to the following two condions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operaon.
Note: Due to the device size limit, the above statement may not be disclaimed on the device. This
equipment complies with FCC radiaon exposure limits set forth for an uncontrolled environment.
Note: This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This product generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. However, there is no guarantee that
interference will not occur in a parcular installaon. If this product does cause harmful
interference to radio or television recepon, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
EU/UKCA Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
under the EMC Direcve 2014/30/EU, RE Direcve 2014/53/EU, the RoHS Direcve
2011/65/EU
This product and - if applicable - the supplied accessories too are marked with
"UKCA" and comply therefore with the following direcves: Radio Equipment
Regulaons 2017, Electromagnec Compability Regulaons 2016, Electrical
Equipment (Safety) Regulaons 2016, the Restricon of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment Regulaons 2012.
Restricons in the 5 GHz band:
Handheld Thermography Camera M Series User Manual
iii

According to Arcle 10 (10) of Direcve 2014/53/EU, when operang in the 5150 to 5350 MHz
frequency range, this device is restricted to indoor use in: Austria (AT), Belgium (BE), Bulgaria (BG),
Croaa (HR), Cyprus (CY), the Czech Republic (CZ), Denmark (DK), Estonia (EE), Finland (FI), France
(FR), Germany (DE), Greece (EL), Hungary (HU), Iceland (IS), Ireland (IE), Italy (IT), Latvia (LV),
Liechtenstein (LI), Lithuania (LT), Luxembourg (LU), Malta (MT), Netherlands (NL), Northern Ireland
(UK(NI)), Norway (NO), Poland (PL), Portugal (PT), Romania (RO), Slovakia (SK), Slovenia (SI), Spain
(ES), Sweden (SE), Switzerland (CH), and Turkey (TR).
In accordance with the Radio Equipment Regulaons 2017 in the UK, the device working in the
5150 to 5350 MHz frequency range is restricted to indoor use in the United Kingdom.
Frequency Bands and Power (for CE/UKCA)
Equipment
Model
Frequency Band and Power
M20 Series Wi-Fi 2.4 GHz (2.4 GHz to 2.4835 GHz): 20 dBm
Wi-Fi 2.4 GHz (2.4 GHz to 2.4835 GHz): 20 dBm; Wi-Fi 5 GHz (5.15 GHz to 5.25
GHz): 23 dBm; Wi-Fi 5 GHz (5.25 GHz to 5.35 GHz): 23 dBm; Wi-Fi 5 GHz (5.47
GHz to 5.725GHz): 23 dBm; Wi-Fi 5 GHz (5.725 GHz to 5.85 GHz): 14 dBm
Use the power adapter provided by a qualied manufacturer. Refer to the product specicaon for
detailed power requirements.
Use the baery provided by a qualied manufacturer. Refer to the product specicaon for
detailed baery requirements.
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed
of as unsorted municipal waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collecon points. For more informaon see:
www.recyclethis.info
According to the Waste Electrical and Electronic Equipment Regulaons 2013:
Products marked with this symbol cannot be disposed of as unsorted municipal
waste in the United Kingdom. For proper recycling, return this product to your local
supplier upon the purchase of equivalent new equipment, or dispose of it at
designated collecon points. For more informaon see: www.recyclethis.info.
2006/66/EC (baery direcve): This product contains a baery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentaon for specic baery informaon. The baery is marked with this
symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the baery to your supplier or to a designated
collecon point. For more informaon see:www.recyclethis.info
According to the Baeries and Accumulators (Placing on the Market) Regulaons
2008 and the Waste Baeries and Accumulators Regulaons 2009: This product
Handheld Thermography Camera M Series User Manual
iv

contains a baery that cannot be disposed of as unsorted municipal waste in the
United Kingdom. See the product documentaon for specic baery informaon.
The baery is marked with this symbol, which may include leering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the baery to
your supplier or to a designated collecon point. For more informaon see:
www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-003 (B)/NMB-003(B) standards requirements.
This device complies with Industry Canada
licence-exempt RSS standard(s). Operaon
is subject to the following two condions:
(1) this device may not cause interference,
and
(2) this device must accept any
interference, including interference that
may cause undesired operaon of the
device.
This equipment complies with IC RSS-102
radiaon exposure limits set forth for an
uncontrolled environment.
(i) The device for operaon in the band
5150-5250 MHz is only for indoor use to
reduce the potenal for harmful
interference to co-channel mobile satellite
systems;
(ii) The maximum antenna gain permied
for devices in the bands 5250-5350 MHz
and 5470-5725 MHz shall comply with the
e.i.r.p. limit; and
(iii) The maximum antenna gain permied
for devices in the band 5725-5825 MHz
shall comply with the e.i.r.p. limits specied
for point-to-point and non point-to-point
operaon as appropriate.
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitaon est autorisée
aux deux condions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'ulisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est suscepble d'en compromere le
fonconnement.
ce matériel est conforme aux limites de dose
d'exposion aux rayonnements, CNR-102 énoncée
dans un autre environnement.
(i)Les disposifs fonconnant dans la bande 5150-
5250 MHz sont réservés uniquement pour une
ulisaon à l'intérieur an de réduire les risques de
brouillage préjudiciable aux systèmes de satellites
mobiles ulisant les mêmes canaux.
(ii) Le gain d'antenne maximal autorisé pour les
appareils dans les bandes 5250-5350 MHz et
5470-5725 MHz doivent respecter le pire limiter; et
(iii) Le gain d'antenne maximal autorisé pour les
appareils dans la bande 5725-5825 MHz doivent
respecter le pire limites spéciées pour le point-à-
point et l'exploitaon non point à point, le cas
échéant.
KC
B급 기기: 이 기기는 가정용(B급) 전자파적합기기로써 주로 가정에서 사용하는 것을 목적으
로 하며, 모든 지역에서 사용할 수 있습니다.
Handheld Thermography Camera M Series User Manual
v

Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger
Indicates a hazardous situaon which, if not avoided, will or could
result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if not avoided, could
result in equipment damage, data loss, performance degradaon, or
unexpected results.
Note Provides addional informaon to emphasize or supplement
important points of the main text.
Handheld Thermography Camera M Series User Manual
vi

Safety Instrucon
These instrucons are intended to ensure that user can use the product correctly to avoid danger
or property loss.
Laws and Regulaons
●Use of the product must be in strict compliance with the local electrical safety regulaons.
Transportaon
●Keep the device in original or similar packaging while transporng it.
●Keep all wrappers aer unpacking them for future use. In case of any failure occurred, you need
to return the device to the factory with the original wrapper. Transportaon without the original
wrapper may result in damage on the device and the company shall not take any responsibilies.
●DO NOT drop the product or subject it to physical shock. Keep the device away from magnec
interference.
Power Supply
●Input voltage for device should meet the Limited Power Source (5 VDC, 2 A) according to the
IEC61010-1 standard. Please refer to technical specicaons for detailed informaon.
●Make sure the plug is properly connected to the power socket.
●DO NOT connect mulple devices to one power adapter, to avoid over-heang or re hazards
caused by overload.
Baery
●Improper use or replacement of the baery may result in explosion hazard. Replace with the
same or equivalent type only. Dispose of used baeries in conformance with the instrucons
provided by the baery manufacturer.
●The built-in baery cannot be dismantled. Please contact the manufacture for repair if
necessary.
●For long-term storage of the baery, make sure it is fully charged every half year to ensure the
baery quality. Otherwise, damage may occur.
●When the device is powered o and the RTC baery is full, the me sengs can be kept for 2
months.
●In the rst use, power on the device and charge the RTC baery with the lithium baery for
more than 8 hours.
●The lithium baery voltage is 3.7 V, and the baery capacity is 5000 mAh.
●The baery is cered by UL2054.
Handheld Thermography Camera M Series User Manual
vii

Maintenance
●If the product does not work properly, please contact your dealer or the nearest service center.
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
●A few device components (e.g., electrolyc capacitor) require regular replacement. The average
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
●Wipe the device gently with a clean cloth and a small quanty of ethanol, if necessary.
●If the equipment is used in a manner not specied by the manufacturer, the protecon provided
by the device may be impaired.
●Please noce that the current limit of USB 3.0 PowerShare port may vary with the PC brand,
which is likely to result in incompability issue. Therefore, it’s advised to use regular USB 3.0 or
USB 2.0 port if the USB device fails to be recognized by PC via USB 3.0 PowerShare port.
●We recommend you send the device back for calibraon once a year, and please contact the
local dealer for the informaon on maintenance points.
Using Environment
●DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-alkali, or damp
environments. Make sure the running environment meets the requirement of the device. The
operang temperature shall be -10°C to 50°C (14°F to 122°F), and the operang humidity shall
be 90% or less.
●This device can only be safely used in the region below 2000 meters above the sea level.
●Place the device in a dry and well-venlated environment.
●DO NOT expose the device to high electromagnec radiaon or dusty environments.
●DO NOT aim the lens at the sun or any other bright light.
●When any laser equipment is in use, make sure that the device lens is not exposed to the laser
beam, or it may burn out.
●The device is suitable for indoor condions.
●The polluon degree is 2.
●Overvoltage category: 0 for Handheld Thermography Camera.
●Overvoltage category: II for power adapter.
Technical Support
The hps://www.hikmicrotech.com portal will help you as a HIKMICRO customer to get the most
out of your HIKMICRO products. The portal gives you access to our support team, soware and
documentaon, service contacts, etc.
Emergency
●If smoke, odor, or noise arises from the device, immediately turn o the power, unplug the
power cable, and contact the service center.
Handheld Thermography Camera M Series User Manual
viii

Laser Light Supplement Warning
Warning: The laser radiaon emied from the device can cause eye injuries, burning of skin or
inammable substances. Prevent eyes from direct laser. Before enabling the Light Supplement
funcon, make sure no human or inammable substances are in front of the laser lens. The wave
length is 650 nm, and the power is less than 1 mW. The laser meets the IEC60825-1:2014 standard.
Laser maintenance: It is not necessary to maintain the laser regularly. If the laser does not work,
the laser assembly needs to be replaced in the factory under warranty. Keep the device power o
when replacing laser assembly. Cauon-Use of controls or adjustments or performance of
procedures other than those specied herein may result in hazardous radiaon exposure.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou,
Zhejiang 310052, China
Hangzhou Microimage Soware Co., Ltd
COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various
countries or regions, including without limitaon, the United States, European Union, United
Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your
professional legal or compliance expert or local government authories for any necessary export
license requirements if you intend to transfer, export, re-export the thermal series products
between dierent countries.
Handheld Thermography Camera M Series User Manual
ix