Hillsdale Furniture 348-260 User manual

STEP 1
Attach both Bed Grills (H) to
both Short and Long Bed
Post (J &K) 2per each grill,
using 2Long Allen Bolts(A),
and 2Check Rings (F) per
each post. Tighten All Bolts.
See both figures 1 & 2.
FIGURE 1
H
H
J
J
K
K
LL
M M
FIGURE 2
AF
AF
AF
AF
STEP 2
Attach Short Canopy Posts(L)
to Long Bed Posts(K) by
screwing into place. Press in
firmly and make sure poles
remain tight. See Figure 1.
STEP 3
Attach Long Canopy Posts(M)
to Short Bed Posts(J) by pressing
in firmly and screwing into place
making sure poles remain tight.
See Figure 2. Canopy Poles (P
&R) are ready for assembly.
NN
NN
HARDWARE LIST
(12) Long Allen Bolts
(4) Short Allen Bolts
(8) Metal Washers
(8) Spring Washers
(4) Hex Nuts
(8) Check Rings
(1) Allen Wrench
A
B
C
D
E
F
G
PARTS LIST
(2) Bed Grills
(2) Short Bed Posts
(2) Long Bed Posts
(2) Short Canopy Posts
(2) Long Canopy Posts
(4) Top Finials
(2) Long Canopy Poles
(2) Short Canopy Poles
H
J
K
L
M
N
P
R
A
DOVER CANOPY BED
Model #348-260 - Full Size Canopy & Legs (Sold With 348-460)
Model #348-200 - Queen Size Canopy & Legs (Sold With 348-500)
Model #348-220 - King Size Canopy & Legs (Sold With 348-660)
B
C D
G
E F
J
L
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 11-08-2013
Page 1 of 2
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.

FIGURE 3
STEP 4
Attach Canopy Poles (P &R) to either Canopy Post (L &M) by connecting then holding in place
using 1 Top Finial (N) per each post. Tighten Finials down to hold poles in place. See Figure 3.
STEP 5
Attach Bed Frame (*Not Included) to Long Bed Posts(K) using 2Long Allen Bolts(A), 2 Spring
Washers (D), 2Metal Washers (C) and 2Hex Nuts(E) per each post. Tighten All Bolts. See
Figure
STEP 6
Attach Bed Frame (*Not Included) to Short Bed Posts(J) using 2Short Allen Bolts(B), 2 Spring
Washers (D) & 2 Metal Washers (C) per each post. Tighten All Bolts. See Figure 5. Assembly
is now complete.
L
L
M
M
R
P
R
P
R
P
L or M
FIGURE 4
N
N
N
N
N
A
DCE
E
C
D
A
K
D
CB
D
C
JB
FIGURE 5
Date: 11-08-2013
Page 2 of 2
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.