Hillsdale Furniture 1178-021 User manual

FURNITURE, LLC.
HILL
SD
ALE
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure
that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult
assembly is required. Customer ervice Phone Number: 502-562-0000
A
STEP 1
Begin assembly by attaching the upport Brace (R) to each
inner back post on the Full End Panel (K) & Open End
Panel (L) using 2 Allen Bolts (D), 2 pring Washers (E) &
2 Flat Washers (F) from the inside per each side. Do not
fully tighten bolts.
See next page for more assembly.
HARDWARE LIST
(4) Allen Bolts 5/16 x 3-3/4
(8) Allen Bolts 1/4 x 2-3/4
(1) Allen Bolt 1/4 x 1-1/2
(10) Allen Bolts 1/4 x 3/4
(10) pring Washers 1/4
(10) Flat Washers 1/4
(4) quare Lock Nuts
(1) Allen Wrench 1/4
(1) Allen Wrench 5/16
A
B
C
D
E
F
G
H
J
PARTS LIST
(1) Full End Panel
(1) Open End Panel
(1) Top upport Frame
(2) ide Rails
(2) Cross Braces
(1) upport Brace
(1) helf
K
L
M
N
P
R
Date: 05-23-07
Page 1 of 3
UNIVERSAL STUDY LOFT
Model #1178-021 Carton A
Model #1178-011 Carton B
B H
J
CD
EF G
K
L
R
D
E
F
F
E
D
D
E
F
F
E
D

Date: 05-23-07
Page 2 of 3
K
L
R
P
P
K
L
M
F
E
D
D
E
F
A
G
G
A
A
STEP 2
Attach each Cross Brace (P) to
the inside of each back post on
each Full End Panel (K) & Open
End Panel (L) using 1 Allen Bolt
(D), 1 pring Washer (E) & 1 Flat
Washer (F) per each side. Once
in place, attach each Cross Brace
(P) to the bottom side of the
upport Brace (R) also using 1
Allen Bolt (D), 1 pring Washer
(E) & 1 Flat Washer (F) per each
side. Do not fully tighten bolts.
STEP 3
Once in place,
carefully attach the
Top upport Frame
(M) to the inside of
each Full End Panel
(K) & Open End
Panel (L) by
centering in place
and inserting the
metal tabs into the
open metal slot on
the inside of each
post. Make sure each
side is in proper place
before securing with
1 quare Lock Nut
(G) from the outside
of the upport Frame
and 1 Allen Bolt (A)
from the outside of
each post on the end
panels. Do not fully
tighten bolts.

S
R
D
E
F
D
E
F
S
R
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for
polishing, as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
Date: 05-23-07
Page 3 of 3
K
L
K
L
R
N
N
M
R
B
B
B
B
STEP 4
Attach both ide Rails (N) to
the inside of each Full End
Panel (K) & Open End Panel
(L) from the top using 1 Allen
Bolt (B) per each outside. Also
attach the ide Rails to the
top of each rail on the Top
upport Frame (M) using 2
Allen Bolts (B) from the bottom
of each side. Tighten all bolts
from teps 1 through 4 using
the Allen Wrenches (H & J)
that have been provided.
STEP 5
Finally, attach the helf ( ) to the
upport Brace (R) by hooking over
the back side and securing in place
with 2 Allen Bolts (D), 2 pring
Washers (E) & 2 Flat Washers (F)
from the back. ee Figure A.
Also, attach the helf ( ) to either
the Full End Panel (K) or the Open
End Panel (L) using 1 Allen Bolt
(C) from the inside. ee Figure B.
You may attach the helf to either
side you prefer. The assembly of
your new item is now complete.
S
FIGURE A
FIGURE B
K or L
C