Hillsdale Furniture URBAN QUARTERS 101816-104786 User manual

To help prevent serious or fatal injuries from entrapment or falls:
• Follow the information on the warnings appearing on the upper bunk end structure
and on the carton. Do not remove warning label from bed.
• Always use the recommended size mattress or mattress support, or both, to help
prevent the likelihood of entrapment or falls.
• Use only mattress which is 75 inches long and 37-1/2 - 38-1/2 inches wide on upper
bunk, and 75 inches long and 54 inches wide on the lower bunk. Ensure thickness
of mattress and foundation combined does not exceed 8 inches and that mattress
surface is at least 5 inches (127 mm) below the upper edge of guardrails.
• Do not allow children under 6 years of age to use the upper bunk.
• Prohibit more than one person on the upper bunk at all times.
• Periodically check and ensure that the guardrail, ladder, and other components are
in their proper position, free from damage, and that all connectors are tight.
• Do not allow horseplay on or under the bed and prohibit jumping on the bed.
• Always use the ladder for entering and leaving the upper bunk.
• Do not use substitute parts.
Contact the manufacturer or dealer for replacement parts.
• Use of a night light may provide added safety precaution for a child using the
upper bunk.
• Always use guardrails on both long sides of the upper bunk. If the bunk bed will be
placed next to the wall, the guardrail that runs the full length of the bed should be
placed against the wall to prevent entrapment between the bed and wall.
• The use of water or sleep flotation mattresses is prohibited.
• STRANGULATON HAZARD - Never attach or hang items to any part of the bunk bed
that are not designed for use with the bed; for example: but not limited to - hooks, belts,
and jump ropes.
! IMPORTANT !
Keep these instructions for future reference.

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 09-28-2015
Page 1 of 3
URBAN QUARTERS METAL TWIN-FULL BUNK BED
Model #101816-104786 (1265-212)
Model #101814-104784 (1265-213)
HARDWARE LIST
A (8) M8 x 85mm Allen Bolts
B (7) 1/4” x 2-3/4” Allen Bolts
C (6) 1/4” x 5/8” Allen Bolts
D (3) 1/4” x 2-1/2” Allen Bolts
E (12) 1/4” x 1-1/2” Allen Bolts
F (8) M8 Connectors
G (3) 1/4” Nuts
H (3) 1/4” Flat Washers
I (1) 10mm Open Wrench
J (1) 5mm Allen Wrench
K (1) 4mm Allen Wrench
PARTS LIST
L (1) Left End Panel
M (1) Right End Panel
N (1) Ladder
O (1) Back Rail
P (1) Front Rail
Q (3) Legs
R (2) Back Frame Supports
S (2) Front Frame Supports
T (3) Upper Deck Panels
U (3) Lower Deck Panels
QTYPART
1I
1K
HARDWARE QTYPART HARDWARE
1
J
3G 3H
12E 8F
6C 3D
8A 7B
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
HDFBP
STEP 1 - Figure 1
Begin assembly by attaching Frame Supports (R & S) to
End Panels (L & M) using M8 Connectors (F) and Allen
Bolts (A). Tighten all bolts with Allen Wrench (J) provided.
AA
A
A
A
A
A
A
A
A
A
A
A
A
A
A
F
F
F
F
F
F
F
F
F
F
FF
F
F
F
F
L
M
R
R
S
S
FIGURE 1

EE
EE
EE
EE
EE
EE
URBAN QUARTERS METAL TWIN-FULL BUNK BED
Model #101816-104786 (1265-212)
Model #101814-104784 (1265-213)
Date: 09-28-2015
Page 2 of 3
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
STEP 2 - Figure 2
Next attach Legs (Q) to bottom of Lower Deck Panels (U) using
Allen Bolts (C). Tighten bolts with Allen Wrench (K) provided.
STEP 3 - Figure 3
Next insert the Deck Panels (T & U) on to
the Frame Supports (R & S) and secure
with Allen Bolts (E). Tighten bolts with
Allen Wrench (K) provided.
R
R
EE
EE EE
EE
EE
EE
T
T
T
U
U
U
S
S
CC C
C
Q
U
FIGURE 2
U
U
U
FIGURE 3

R
S
FIGURE 5
N
BB
BB
B
B
B
B
B
B
B
B
B
B
O
P
L
M
URBAN QUARTERS METAL TWIN-FULL BUNK BED
Model #101816-104786 (1265-212)
Model #101814-104784 (1265-213)
STEP 5 - Figure 5
Finally attach Back Rail (O) to End Panels (L & M) using 1 Allen Bolt (B) from outside and to Back Frame
Support (R) using1 Allen Bolt (B) on each side from the bottom. Attach Front Rail (P) to End Panel (L) using 1
Allen Bolt (B) from outside and to Front Frame Support (S) using 1 Allen Bolt (B) from the bottom on the left
side and through top of Ladder (N) on the right side.
Date: 09-28-2015
Page 3 of 3
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
DD
N
HH
G
G
S
S
S
N
FIGURE 4
U
U
U
STEP 4 - Figure 4
Next attach Ladder (N) to
Front Frame Supports (S)
using 3 Allen Bolts (D), 3
Flat Washers (H) and 3
Nuts (G). Tighten bolts with
Allen Wrench (J) and
tighten nuts with Open
Wrench (I) provided.