URBAN OUTFITTERS ALONZO BED User manual

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 1 of 8
(1) Front / Back Frame x2
(Wrapped in green tape)
(2) Side Fram x2
(Wrapped in green tape)
(3) Center Support x2
(Wrapped in green tape)
(4) Leg x4
(Wrapped in green tape)
(5) Center Leg x3
(Wrapped in green tape)
(6) Slats x2
(Wrapped in green tape)
(B) Washer x8
[20 mm]
(C) Allen Bolt
[8mm x 20mm]
x16
E) Allen Key x1
(A) Allen Bolt x8
[8mm x 45mm]
D) Allen Bolt x3
[8mm x 45mm]
x3
ALONZO BED
Assembly Instructions
TOOLS REQUIRED BUT NOT INCUDED:
EX. ‘Phillips head screwdriver, Level, Hammer’ (do not include graphic)
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 2 of 8
6
1
2
3
5
4
2
1
ALONZO BED
Assembly Instructions
EXPLODED & LABELED

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 3 of 8
Note: Match the labels
pasted on components
before assembly, e.g. Label
A on front frame to Label A
on side frame.
2
1 E
A
A
B B
2
EA
B A
1 1
2
A
B
B
ALONZO BED
Assembly Instructions
2 1
STEP 1
Lay the top front frame (1) upside down onto a clean smooth surface such as carpet or cardboard.
Place top front frame (1) into side framing (2) as shown in the sketch below. Insert Allen Bolts (A)
with Washer (B) through frame then tighten with Allen key (E).

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 4 of 8
Note: Match the labels
pasted on components
before assembly, e.g. Label
A on leg to Label A on side
frame or front frame.
4
EC2
1 1
2
E
C
L 20 MM
ALONZO BED
Assembly Instructions
STEP 2
Align holes in legs (4) to holes in side frame (2) as shown in sketch below. Insert Allen Bolts (C)
through Leg (4) into side frame (2) and then tighten with Allen key (E).

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 5 of 8
Note: Match the labels
pasted on components
before assembly, e.g. Label
A on front frame to Label A
on side frame.
2
1 31
2
1
3
1
3
ALONZO BED
Assembly Instructions
STEP 3
Attach center support (3) to frame (1) as shown in the sketch below.

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 6 of 8
3
2
1 1
5
2
E
D
L 45 MM
L 45 MM
ALONZO BED
Assembly Instructions
STEP 4
Attach center legs (5) to center support (3) as shown in the sketch below. Insert Allen Bolts (D)
through center support (3) into center leg (5) and then tighten with Allen key (E).

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 7 of8
6
1
5
4
2
1
ALONZO BED
Assembly Instructions
STEP 5
Place the slat sets (5) on the assembled frame. The front and back slat should be positioned
so that the wood blocks on either end of the side frame (2) and center frame (3) fit inside the
slat set - this will keep the slat sets in position.

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 8 of8
ASSEMBLED
66" 86"
4.5"
10.5"
ALONZO BED
Assembly Instructions