HIMO L150 User manual

HIMO Cable Lock
User Manual

Precautions for use
Safe guidelines for using the product
Before installing the Cable Lock, please read this manual carefully.
Please use within the scope of product attributes
The Cable Lock is not child friendly. Do not allow children to play with parts.
When installing the Cable Lock and adjusting the position of the saddle, be careful not to expose the safety marking
line of the saddle tube
The key can be taken out when the lock is closed and opened. Please do not put the key on the lock when driving
to avoid losing it.
Do not place the product in a strong acid or weak base environment, so as not to cause corrosion damage to the
product and affect its use
Specification
Cable lock level
Lock core technology
Cable lock material
The diameter of Cable
Dustproof and waterproof grade
Key opening rate
Maximum pull of lock
Lock service life
Level B
Zinc alloy vane type locking core
No. 60 steel
4.5mm
IP 54
≤0.327%
≥1800N
10000/ 2 Years

Quick understanding of HIMO L150
How to install
Instructions
Main uses and features
The HIMO L150 portable steel cable lock has a stylish and simple appearance. It is a car lock that can be easily locked
without a key. It can be used with a variety.
Maintenance
Parts such as locks and noisy keys can be wiped with lubricating oil regularly to avoid rust and oxidation, Keep the
switch flexible to prolong to service life.
01. Put the lock frame on the
seat tube.
02. Tighten the lock by adjusting
the screws.
03. Press the button to install the
lock on the lock frame.
04. The installation is complete.
Fixed and locked: 1. Insert the key into the key slot, and then turn it
to the right to open the lock ring. 2. Wrap the lock body around the
rear wheel, then insert the lock head into the lock slot.
Independent locking: 1. Press the lock frame button to remove the
cable lock, insert the key into the key slot and turn it to the right,
and the lock ring will open. 2. Choose any medium to wrap the lock
body, and after the car is effectively fixed, insert the lock head into
the lock slot.