HIMO U Lock User manual

Precautions for use
Product Size
Product Weight
U Lock Level
Cable lock material
Lock beam material
Lock beam diameter
Dustproof and waterproof grade
Key opening rate
Maximum pull of lock
200 x 158 x 34 mm
0.91 kg
Super level B lock
Zinc alloy nickel plated
40Cr heat treatment
34mm(Contains silica gel)
IP 67
1/600
30K/N
Before installing the U Lock, please read this manual carefully.
Please use within the scope of product attributes
The U Lock is not child friendly. Do not allow children to play with parts.
When installing the Cable Lock and adjusting the position of the saddle, be careful not to expose the safety marking
line of the saddle tube
The key can be taken out when the lock is closed and opened. Please do not put the key on the lock when driving
to avoid losing it.
Do not place the product in a strong acid or weak base environment, so as not to cause corrosion damage to the
product and affect its use.
Safe guidelines for using the product
Specification

Quick understanding of HIMO U Lock
Main uses and features
It can be used on various types of bicycles, electric vehicles and motorcycles. It ensures security and helps to
prevent theft.
Maintenance
Parts such as locks and noisy keys can be wiped with lubricating oil regularly to avoid rust and oxidation, keep the
switch flexible and prolong the service life.
How to install
01. As shown in the figure,
fix the car lock as a whole under
the seat tube, and reserve a
200mm safe space in the opening
direction when the lock frame is
installed.
02. Set the lock frame into the
seat tube.
03. Insert and tighten the locking
screw.
04. The installation is complete.
Insert the key, open the lock, and take the U lock out of the lock frame
cover.
Note: The key cannot be removed when the U-shaped lock is opened.
Align the U lock with the spokes of the vehicle, insert it and lock it,
and then remove the key to lock the vehicle.
Instructions