HIOTH TECHNOLOGY CT-HANN1011-DY User manual

HIOTH TECHNOLOGY CO., LTD. USER MANUAL
www.HiotH.com
Curtain Motor
Introduction
Smart curtain control system is able to remote control the curtain through the mobile device even
in the away area. This product can installed with smart curtain switch to achieve the control of
ON/OFF as well as combining other applications under HiotH system to complete more functions
such as linkage or scenario modes to make a more convenient life.
Technical Information
Local or remote control curtains of ON/OFF
Combining with other smart devices to set more applications
Powerful and durable
Specification
1. Rated voltage: 230V AC
2. Reversing function: support
3. The overheating protection function: support
4. Material: high strength Aluminum Alloy, silky smooth
5. Working temperature: -25 ~ +85℃
6. Dimension: 320mm x 70mm (D)
CT-HANN1011-DY

HIOTH TECHNOLOGY CO., LTD. USER MANUAL
www.HiotH.com
Installation Instruction
CAUTION:
Cut off power supply at circuit breaker or fuse before installation to avoid fire or shock! Neutral
and live wire are required to put into the bottom box.
PRODUCT INSTALLATION
As shown in the figure, follow the wiring diagram to insert all wires into right terminals and
tighten screws.
Fig.1 Curtain Switch
Fig.2 Monorail curtain switch wiring diagram
Fig.3 Double track curtain switch wiring diagram
NOTES FOR THE DIAGRAM
L- terminal for live wire
N - terminal for neutral wire
Motor wiring method -
Brown connect to Forward Rotation;
Black connect to Reverse Rotation; Blue (public) connect to the Neutral lead;
4-line motor: ignore the Red line (live wire).

HIOTH TECHNOLOGY CO., LTD. USER MANUAL
www.HiotH.com
Safety Notice
A qualified electrician with the understanding of wiring diagrams and knowledge of electrical
safety should complete installation following the instructions.
Before installation, please confirm the real voltage complying with the device’s specification.
Cut off any power supply to secure the safety of people and device.
During installation, protect the device from any physical damage by dropping or bumping. If
happened, please contact the supplier for maintenance.
Keep the device away from acid-base and other corrosive substances to avoid damage.
Avoid overexertion during operation, to protect device from mechanical damage.
Read all instructions and documentation and save for future reference.