Hisense AEH-W4AI User manual

Version No.1849589-02

Hisene Cloud

7 8
1. Users shall apply for an account
before using the APP, and use this
account to connect with household
appliance. Click “Register” button to
apply for the account.
2. Fill in information, and click “Confirm”
button to finish registration.
3. Log in the account to enter “Add
equipment” interface

3. Scan the model barcode of the
appliance, which can be found on
the outer surface of the appliance
or in the operating manual.
4. After finished these three
procedures mentioned above,
click “Next step”.

5. After “The equipment binding succeeds!”
was shown on the interface, click “Return
to homepage” to finish binding.
1. Click “Add equipment” button. 2. “Wi-Fi” shown in above picture is the
wireless router the phone connected to.
Users need to type in router password
for binding. Then click “Next step”.

1. In the household appliance list, press the
appliance needed to be unbound for about 3
seconds and above options will be shown.
“Delete everyone's binding” unbinds all
accounts connected to this appliance;

Router shall support detection, broadcast and
host functions of UDP, and shall be able to open
the ports of 6819/5820/5821/7820/7821/8080
to external network.
Router's SSID and PASSWORD are set in
English and numbers without supporting other
languages, and less than 31 characters are
required for both.
Chip model Chip supplier
QC A9 55 8- AT 4A Q ua lc om m
TP 93 43 -A L3 A Qu al co mm
QC A9 53 3- AL 3A Q ua lc om m
AR 93 41 -A L1 A Qu al co mm
AR 93 41 -P L3 A Qu al co mm
TP 93 43 -A L3 A Qu al co mm
BC M5 35 7C 0K FB G Br oa dc om
BC M4 32 3 Br oa dc om
BC M4 70 6K PB G Br oa dc om
RTL8196C Realtek