Hisense RB325D4AW1 Mounting instructions

RB325D4AW1
RB325D4AB1

Contents
Safety and warning information_ __ _ _ _ _ Using your appliance_ _ _ _ __ _ _ _ _ _ _ _
Cleaning and Care _ _ _ _ _ _ _ _ _ _ _ _ _
Troubleshooting _ _ _ _ _ _ _ _ _ _ _
Disposal of the appliance_ _ _ _ _ _ _ _ _ _
Reversing the door _ _ _ _ _ _ _ _ _ _ _ _ _
Description of the appliance _ _ _ _ _ _ _ _
Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Helpful hints and tips__ _ _ _ _ _ _ _ _ _ _ _
12
12
13
15
16
8
10
11
For your safety and correct
usage, before installing and
first using the appliance, read
this user manual carefully,
including its hints and
warnings. To avoid
unnecessary mistakes and
accidents, it is important to
make sure that all people
using the appliance are
thoroughly familiar with its
operation and safety
features. Save these
instructions and be sure that
they remain with the
appliance if it is moved or
sold, so that a using it
throughout its life will be
properly informed on its
correct appliance usage and
safety.
For the safety of life and
property, keep the
precautions of these user's
instructions as the
manufacturer is not
responsible for damages
This appliance is in accordance with the following EU guidelines:
and 2004/108/EC and 2009/125/EC and EC.643/2009 and 2002/96/EC
2006/95/EC
caused by omission.
This appliance can be used
by children aged from 8
years and above and
persons with reduced
physical, sensory or mental
capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the
appliance in a safe way and
understand the hazards
involved. Children shall not
play with the appliance.
Cleaning and user
maintenance shall not be
made by children without
supervision.
Keep all packaging away
from children as there is risk
of suffocation.
If you are discarding the
appliance, pull the plug out of
Safety for children and others
who are vulnerable people
Installing your new appliance_ _ _ _ _ _ _ _ 7
2
2

of the socket, cut the
connection cable (as close
to the appliance as you can)
and remove the door to
prevent children playing
from suffering an electric
shock or from closing
themselves inside it.
If this appliance, featuring a
magnetic door seals, is to
replace an older appliance
having a spring lock (latch)
on the door or lid, be sure to
make the spring lock
unusable before you
discard the old appliance.
This will prevent it from
becoming a death trap for a
child.
General safety
This
appliance is intended
WARNING —
to
be used in
similar applications such as
household and
-staff kitchen areas in
shops, offices and other
working environments;
-farm houses and by clients
in hotels, motels and other
residential type
environments;
-bed and breakfast type
environments;
-catering and similar non-
retail applications
WARNING — Do not store
explosive substances such
as aerosol cans with a
flammable propellant in this
appliance.
WARNING — If the supply
cord is damaged, it must be
replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
WARNING — Keep
ventilation openings, in the
appliance enclosure or in
the built-in structure, clear
of obstruction.
WARNING — Do not use
mechanical devices or other
means to accelerate the
defrosting process, other
than those recommended
by the manufacturer.
WARNING — Do not
damage the refrigerant
circuit.
WARNING — Do not use
electrical appliances inside
the food storage
compartments of the
appliance, unless they are
of the type recommended
by the manufacturer.
WARNING — The
refrigerant and insulation
blowing gas are flammable.
When disposing of the
appliance, do so only at an
authorized waste disposal
centre.
3

plug is not or
damaged. A or
damaged power plug may
overheat and cause a fire.
3. Make sure that you can
plug of the
appliance.
4. Do not pull the main cable.
5. If the power plug socket is
loose, do not insert the power
plug. There is a risk of
electric shock or fire.
6.You must not operate the
crushed
crushed
access the main
appliance without the interior
lighting lamp cover.
7.The fridge is only applied
with power supply of single
phase alternating current of
220~240V/50Hz. If fluctuation
of voltage in the district of
user is so large that the
voltage exceeds the above
scope, for safety sake, be
sure to apply A.C. Automatic
voltage regulator of more
than 350W to the fridge. The
fridge must employ a special
power socket instead of
common one with other
electric appliances. Its plug
must match the socket with
ground wire.
Electrical safety
Do not expose to flame.
The refrigerant isobutene
(R600a) is contained within
the refrigerant circuit of the
appliance, a natural gas with
a high level of environmental
compatibility, which is
nevertheless flammable.
During transportation and
installation of the appliance,
ensure that none of the
components of the refrigerant
circuit becomes damaged.
The refrigerant (R600a) is
flammable.
Refrigerant
If the refrigerant circuit should
be damaged:
-Avoid opening flames and
sources of ignition.
-Thoroughly ventilate the
room in which the appliance
is situated.
It is dangerous to alter the
specifications or modify this
product in any way. Any
damage to the cord may
cause a shortcircuit, fire,
and/or electric shock.
1.The power cord must not
be lengthened.
2. Make sure that the power
Caution:risk of fire
4

Do not store flammable
gass or liquids in the
appliance,There is a risk of
an explosion.
Do not operate any
electrical appliances in the
appliance(e.g.electric ice
cream makers,mixers etc.).
When unplugging always
pull the plug from the mains
socket,do not pull on the
cable.
Do not place hot items near
the plastic components of
this appliance.
Store pre-packed frozen
food in accordance with the
frozen food manufacture’s
instructions.
The appliances
manufactures storage
recommendations should
be strictly adhered to.Refer
to relrelevant instructions
for
Do not place carbonated of
fizzy drinks in the freeze
compartment as it creates
pressure on the
container,which may cause
it to explode,resulting in
damage to the appliance.
frost
burns if consumed straight
from the freezer
compartment.
storage.
Frozen food can cause
Daily use Do not place the appliance
in direct sunlight.
Keep buring candles,lamps
and other items with naked
flames away from the
appliance so that do not set
the appliance on fire.
The appliance is intended
for keeping food stuff and/or
beverages in normal
household as explained in
this instruction booklet.
The appliance is
heavy.Care should be taken
when moving it.
Do not remove nor touch
items from the freezer
comartment if your hands
are damp/wet,as this could
cause skin abrasions or
frost/freezer burns.
Avoid prolonged exposure
of the appliance to direct
sunlight.
Never use the base,
drawers, doors etc. to stand
on or as supports.
Frozen food must not be
refrozen once it has been
thawed out.
Do not consume ice
popsicles or ice cubes
straight from the freezer as
this can cause freezer burn
to the mouth and lips.
To avoid items falling and
causing injury or damage to
the appliance, do not
5

Adequate air circulation
should be around the
appliance, lacking this leads
to overheating. To achieve
sufficient ventilation, follow
the instructions relevant to
installation.
Wherever possible the back
of the product should be
against a wall to avoid
touching or catching warm
parts (compressor,
condenser) to prevent the
risk of a fire, follow the
instructions relevant to
installation.
The appliance must not be
locate close to radiators or
cookers.
Make sure that the mains
plug is accessible after the
installation of the appliance.
For electrical connection
carefully, follow the
instructions given in this
manual.
Unpack the appliance and
check if there are damages
on it. Do not connect the
appliance if it is damaged.
Report possible damages
immediately to the place
you bought it. In this case
retain packing.
It is advisable to wait at
least four hours before
connecting the appliance to
allow the oil to flow back in
the compressor.
overload the door racks or
put too much food in the
crisper drawers.
Installation Important!
Caution!
Care and cleaning
Before maintenance, switch
off the appliance and
disconnect the mains plug
from the mains socket.
Do not clean the appliance
with metal objects, steam
cleaner, ethereal oils,
organic solvents or abrasive
cleansers.
Do not use sharp objects to
remove frost from the
appliance. Use a plastic
scraper.
6
Any electrical work required
to do the servicing of the
appliance should be carried
out by qualified electrician
or competent person.
This product must be
serviced by an authorized
Service Center, and only
genuine spare parts must
be used.
1)If the appliance is Frost
Free.
2)If the appliance contains
freezer compartment.
Service

1749
636
1139
938
7

8
Reversing the door
1. Stand the refrigerator, open the upper
door and remove the door shelves and close
it(preventing the shelves are damaged ).
2. Use a putty knife or thin-blade
screwdriver to prize the screw hole cover
which is at the top left corner of the
refrigerator, and Unscrew the upper hinge
cover which is at the top right corner of the
refrigerator.
screw hole cover screw
upper hinge
cover (right)
The side at which the door opens can be
changed from the right side (as supplied) to
the left side, if the installation site requires.
Tools you will need:
1. 8mm socket driver
2. cross-shaped screwdriver
Before you start lay the refrigerator on it’s
back in order to gain access to the base,
you should rest it on soft foam packaging or
similar material to avoid damaging the
cooling pipes at the rear of the refrigerator.
3. Putty knife or thin-blade screwdriver
3.Unscrew the special flange self-tapping
screws which are used for fixing the right
upper hinge part by a 8mm socket driver or
a spanner(please support the upper door
with your hand when doing it ).
right upper hinge part
special flange
selftapping screws
4.Remove the upper hinge axis, transfer it to
reversed side and tighten securely, then put
it in a safe place.
NOTE: When removing the door, watch for
washer(s) between the ceter hinge and the
bottom of the freezer door that may stick to
the door. Do not lose.
6.Unscrew the two special flange self-
tapping screws which are used for fixing the
middle hinge part, then remove the middle
hinge part that hold the lower door in place.
5.Lift the upper door and set it on a non
scratching surface with the outside up
middle hinge part
special flange
selftapping screws

8. Remove the screw hole cover from the left
holes as illustrated and transfer them to the
uncover holes at the right side.
screw hole cover
screw hole covers
screw hole cover
screw hole covers
7. Lift the lower door and set it on a non
scratching surface with the outside up
NOTE: When removing the door, watch for
washer(s) between the ceter hinge and the
bottom of the freezer door that may stick to.
the door. Do not lose.
12. Transfer the lower door to the property
position, adjust the lower hinge part, make
the hinge axis into the lower hole of the
lower door, then tight the bolts.
9. Lay the refrigerator on soft foam
packaging or similar material. Remove both
adjustable bottom feet parts, and remove
the front feet fixed board and the lower
hinge part by unscrewing the special flange
self-tapping screws.
front feet fixed board
ajustable bottom
feet part
special flange
selftapping screws
lower hinge part
ajustable bottom
feet part
special flange
selftapping screws
10. Unscrew the bottom hinge axis and
remove it to the hole which is side-by-side
and screw it.
11. Replace the lower hinge part to the left
side and fixing it with the special flange self-
tapping screws. Replace the front feet fixed
board to another side and fixing it with the
special flange self-tapping screws. Install
the ajustable bottom feet parts,
lower hinge part
front feet fixed board
13. Upturn the middle hinge part the
direction 180 degree, transfer it and adjust
its position ,Make the middle hinge axis into
the upper hole of the lower door, tight the
bolts.
14.Transfer the upper door to the
appropriate position. Secure the door's level;
make the middle hinge axis into the lower
hole of the upper door.
9

15. Transfer the upper hinge part and make
the upper hinge axis into the upper hole of
the upper door,and adjust the position of the
upper door(please support the upper door
with your hand when doing it),fixing the
upper hinge part with the special flange self-
tapping screws.
16. Install the screw hole cover on the top
right corner of the refrigerator. Install the
upper hinge cover (which is in the plastic
bag) on the left corner and screw it.Put the
other upper hinge cover into the plastic bag.
17. Open the upper door and install the door
shelves, then close it.
Warning!
When changing the side at which the door
opens, the appliance must not be connected
to the mains. Remove plug from the mains
beforehand.
upper hinge part
screw
upper hinge cover (left) screw hole
cover
Description of the appliance
View of the appliance
1.Temperature regulator
2.Storage shelf.
3.Crisper Cover
4.Crisper
5.Upper Drawer in freezer
6.Middle Drawer in freezer
7.Lower Drawer in freezer
8.Upper Door rack
9.Lower Door rack
10.Ajustable bottom feet part
11.handles(only for the model with handles) 10
10
18.