Hisense RD-60WC4SIB Mounting instructions

H610BS-WD
H610BI-WD
RD-60WC4SIB

Contents
2
For your safety and correct usage before installing and first
using the appliance, read this user manual carefully, including
its hints and warnings. To avoid unnecessary mistakes and
accidents, it is important to make sure that all people using the
appliance are thoroughly familiar with its
operation and safety features. Save these instructions and be
sure that they remain with the appliance if it is moved or sold,
so that anyone using it throughout its life, will be properly
informed on its usage and safety notices.
For the safety of life and property, keep the precautions of
these user's instructions as the manufacturer is not
,
responsible for damages caused by omission.
Hisense Refrigerator
Safety for children and otherswho are vulnerable people
According to EN standard
According to IEC standard
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
Safety and warning information.2
Description of the appliance
Display controls16
Using your appliance 18
leaning and care21
Troubleshooting
. 23
Disposal of the appliance25
Installing your new appliance 8 
15
Helpful hints and tips 22  

3
Hisense Refrigerator
suffocation.
If you are discarding the appliance, pull the plug out of the
socket, cut the connection cable (as close to the appliance
as you can) and remove the door to prevent children playing
from suffering an electric shock or from closing themselves
inside it.
If this appliance, featuring a magnetic door seals, is to
replace an older appliance having a spring lock (latch) on the
door or lid, be sure to make the spring lock unusable before
you discard the old appliance. This will prevent it from
becoming a death trap for a child.
General safety
WARNING —This appliance is intended to be used in
household and similar applications such as
-staff kitchen areas in shops, offices and other working
environments;
-farm houses and by clients in hotels, motels and other
residential type environments;
-bed and breakfast type environments;
-catering and similar non-retail applications.
WARNING — Do not store explosive substances such as
aerosol cans with a flammable propellant in this appliance.
WARNING — If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
WARNING — Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
WARNING — Do not use mechanical devices or other
means to accelerate the defrosting process, other than those
recommended by the manufacturer.
WARNING — Do not damage the refrigerant circuit.
WARNING — Do not use electrical appliances inside the
food storage compartments of the appliance, unless they are
of the type recommended by the manufacturer.
of Keep all packaging away from children a a s there is risk

4
Hisense Refrigerator
WARNING — The refrigerant and insulation blowing gas are
flammable. When disposing of the appliance, do so only at
an authorized waste disposal centre. Do not expose to
flame.
WARNING —When positioning the appliance, ensure the
supply cord is not trapped or damaged.
WARNING —Do not locate multiple portable socket-outlets
or portable power supplies at the rear of the appliance.
Refrigerant
The refrigerant isobutene (R600a) is contained within the
refrigerant circuit of the appliance, a natural gas with a high
level of environmental compatibility, which is nevertheless
flammable. During transportation and installation of the
appliance, ensure that none of the components of the
refrigerant circuit becomes damaged.
The refrigerant (R600a) is flammable.
WARNING
If the refrigerant circuit should be damaged:
-Avoid opening flames and sources of ignition.
-Thoroughly ventilate the room in which the appliance is
situated.
WARNING — Refrigerators contain refrigerant andgases in
the insulation. Refrigerant and gases must be disposed of
professionally as they may cause eye injuries or ignition.
Ensure that tubing of the refrigerant circuit is not damage
prior to proper disposal.
Replacing the illuminating lamps
WARNING—The illuminating lamps must not be replaced by
the user! If the illuminating lamps is damaged, contact the
customer helpline for assistance.
This warning is only for refrigerators that contain illuminating
lamps.
Risk of fire / flammable materials
:

5
Hisense Refrigerator
Daily use
Do not store flammable gass or liquids in the appliance,
There is a risk of an explosion.
Do not operate any electrical appliances in the appliance
(e.g.electric ice cream makers,mixers etc.).
When unplugging always pull the plug from the mains
socket,do not pull on the cable.
Do not place hot items near the plastic components of this
appliance.
Electrical safety
1.The power cord must not be lengthened.
2. Make sure that the power plug is not crushed or damaged.
A crushed or damaged power plug may overheat and cause a
fire.
3. Make sure that you can access the main plug of the
appliance.
4. Do not pull the main cable.
5. If the power plug socket is loose, do not insert the power
plug. There is a risk of electric shock or fire.
6.You must not operate the appliance without the interior
lighting lamp cover.
7.The fridge is only applied with power supply of single phase
alternating current of 220~240V/50Hz. If fluctuation of voltage
in the district of user is so large that the voltage exceeds the
above scope, for safety sake, be sure to apply A.C. Automatic
voltage regulator of more than 350W to the fridge. The fridge
must employ a special power socket instead of common one
with other electric appliances. Its plug must match the socket
with ground wire.
It is dangerous to alter the specifications or modify this
product in any way.
Any damage to the cord may cause a shortcircuit, fire, and/or
electric shock.

6
Hisense Refrigerator
Do not place food products directly against the air outlet on
the rear wall.
Store pre-packed frozen food in accordance with the frozen
food manufacture’s instructions.
The appliances manufactures storage recommendations
should be strictly adhered to.Refer to relrelevant instructions
for storage.
Do not place carbonated or fizzy drinks in the freeze
compartment as it creates pressure on the container,which
may cause it to explode,resulting in damage to the
appliance.
Frozen food can cause frost burns if consumed straight from
the freezer compartment.
Do not place the appliance in direct sunlight.
Keep buring candles,lamps and other items with naked
flames away from the appliance so that do not set the
appliance on fire.
The appliance is intended for keeping food stuff and/or
beverages in normal household as explained in this
instruction booklet The appliance is heavy.Care should be
taken when moving it.
Do not remove nor touch items from the freezer
compartment if your hands are damp/wet,as this could cause
skin abrasions or frost/freezer burns.
Never use the base,drawers, doors etc. to stand on or as
supports.
Frozen food must not be refrozen once it has been thawed
out.
Do not consume ice popsicles or ice cubes straight from
the freezer as this can cause freezer burn to the mouth
and lips.
To avoid items falling and causing injury or damage to
the appliance, do not overload the door racks or put too
much food in the crisper drawers.
caution!
Care and cleaning

Hisense Refrigerator
Adequate air circulation should be around the appliance,
lacking this leads to overheating. To achieve sufficient
ventilation, follow the instructions relevant to installation.
Wherever possible the back of the product should not be too
close to a wall to avoid touching or catching warm parts
(compressor, condenser) to prevent the risk of a fire, follow
the instructions relevant to installation.
The appliance must not be locate close to radiators or cookers.
Make sure that the mains plug is accessible after the
installation of the appliance.
Service
Any electrical work required to do the servicing of the
appliance should be carried out by qualified electrician or
competent person.
This product must be serviced by an authorized Service
Center, and only genuine spare parts must be used.
1)If the appliance is Frost Free.
2)If the appliance contains freezer compartment.
Installation Important!
For electrical connection carefully, follow the instructions
given in this manual.
Unpack the appliance and check if there are damages on it.
Do not connect the appliance if it is damaged. Report
possible damages immediately to the place you bought it. In
this case retain packing.
It is advisable to wait at least four hours before connecting
the appliance to allow the oil to flow back in the compressor.
Before maintenance, switch off the appliance and disconnect
the mains plug from the mains socket.
Do not clean the appliance with metal objects, steam
cleaner, ethereal oils, organic solvents or abrasive
cleansers.
Do not use sharp objects to remove frost from the appliance.
Use a plastic scraper.

Note: Children aged from 3 to 8 years are allowed to load and
unload refrigerating appliances.(This clause applies only to the
EU region.)
7

8
Installing your new a liance
Before using the appliance for the first
time, you should be informed of the
following tips.
Warning!
For proper installation, this refrigerator
must be placed on a level surface of hard
material that is the same height as the rest
of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator.
The rollers, which are not castors, should
be only used for forward or backward
movement. Moving the refrigerator
sideways may damage your floor and the
rollers.
Ventilation of a liance
In order to improve efficiency of
the cooling system and save
energy, it is necessary to
maintain good ventilation around the
appliance for the dissipation of heat. For
this reason, sufficient clear space should
be available around the refrigerator.
Suggest:It is advisable for there to be
50-70mm of space from the back to the
wall, at least 100mm from its top, at least
100mm from its side to the wall and a clear
space in front to allow the doors to open
130°. As shown in follow diagrams.
Note:
 This appliance performs well within the
climate class from SN to T showed in the
table below. It may not work properly if
being left at a temperature above or below
the indicated range for a long period.
Climate class Ambient tem erature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C
 Stand your appliance in a dry place to
avoid high moisture.
 Keep the appliance out of direct sunlight,
rain or frost. Stand the appliance away
from heat sources such as stoves, fires or
heaters.

Leveling of a liance
For sufficient leveling and air circulating
in the lower rear section of the appliance,
the bottom feet may need to be adjusted.
You can adjust them manually by hand or
by using a suitable spanner.
To allow the doors to self-close, tilt the
top backwards by 10-15mm.
Note:


 If required you may lay the refrigerator
on its back in order to gain access to the
base, you should rest it on soft foam
packaging or similar material to avoid
damaging the backboard of the
refrigerator.
 There is no need to install these
accessories under normal usage.
Only under the extreme circumstances,
that is opening the door about 90 degree,
this refrigerator may take risk of tipping.
Then rubber supporting pad should be
fastened to the lower base cover to steady
this appliance.
9



1. Tilt appliance to find screw hole on the
left of lower base cover.
2. Put screw into the hole of rubber
supporting pad.
3. Make screw in alignment with the hole
on lower base cover. Fasten rubber
supporting pad to the base cover firmly by
a cross screwdriver (self-provided).
①
②
③
lower base cover
cross screwdriver
rubber supporting pad
screw
10

Reversing the door
The side at hich the door opens can be
changed, from the right side (as supplied)
to the left side if required.
Warning! When reversing the door, the
appliance must not be connected to the
mains. Make sure that the plug is removed
from the mains socket.
Additional parts (in the plastic bag)
Left Hinge Left Hinge Cover
Allen Wrench(4mm) Left Middle Hinge
Left Stop Block*2 Left Door Stopper*2
Note: If required, the refrigerator may be
positioned on its back in order to gain
access to the base, it should be rested on
soft foam packaging or similar material to
avoid damaging the backboard of the
refrigerator. To reverse the door, the
follo ing steps are recommended.
1. Stand the refrigerator upright. Open the
door to remove all door racks (to avoid
damage) and then close the door.
Caution!
slightly squeeze the door rack from t o
sides to ards the center and inside of
the door rack, then move it up ard hen
taking out the upper rack and lo er rack.
2. Remove right upper hinge cover ① on
top of the cabinet. Remove the 3 scre s
② used for fixing the right upper hinge
part (see picture belo ) and dismount
the upper hinge parts ③ .
3. Remove scre cover from the
left-front corner of cabinet ith flat head
scre driver and install scre cover-right
to the right front corner. Put the upper
11

hinge cover(right) and upper hinge part
(right) into the plastic bag.
4. Remove the upper door from the
middle hinge by carefully lifting the door
straight up.
5. Place the upper door on a smooth
surface ith its panel up ards.
Loosen scre ③ and take do n
part ② and part ① , Install
replacement door stopper-left
provided (in the plastic bag attached)
and left stop block to the left side
ith scre ③ . Conserve part ①
and ② ith the appliance for future
reference.
6. Use the Allen rench(provided in the
plastic bag) to loosen scre s used to fix
the right middle hinge and remove right
middle hinge. Then remove the lo er
door.
7. Place the lo er door on a smooth
surface ith its panel up ards. Loosen
scre ③ and dismount part ② and
part ① , Install replacement door
stopper-left provided (in the plastic bag)
and left stop block to the left side ith
scre ③ . Keep part ① and ② ith the
appliance for future reference.
12

8. Change scre hole covers and scre
on middle cover plate from left to right
(as sho n in figure belo ).
9.Lie the refrigerator back ards,
Remove ④ (right), Remove three
self-tapping scre s from the lo er hinge
part(right). Loosen the lo er hinge axis
then install it on the reverse hole site,
and tighten into position(change it into
left hinge part). Remove the lo er hinge
part to the left-bottom corner of the
cabinet, Then fix it ith 3 scre s, finally
install part ④ on the left-bottom and
right-bottom of cabinet.
10. Stand the refrigerator upright and
carefully slot the lo er door onto the
lo er hinge pin and hold in position.
install middle hinge-left (in the plastic
bag) ensuring the lo er door in secured
in place.
11. Carefully slot the upper door onto
the middle hinge pin and hold in position.
Move the upper door to an appropriate
position, adjust left upper hinge(in the
plastic bag) and upper door, then fit the
hinge pin into the hinge hole at the top
and the door to secure the door in place.
Then fix the upper hinge part ith
scre s (Please carefully hold upper
door by hand hen installing).
13

12. Assemble the left hinge cover
provided(in the plastic bag) to match the
hinge, install the door racks to original
position. Keep the right hinge cover ith
the appliance for future reference.
14

15
Descri tion of the a liance
Note ！
！！
！
Due to unceasing modification of our products, your refrigerator may be slightly different
from this instruction manual, but its functions and using methods remain the same.
To get the best energy efficiency of this product, please place all shelves, drawers and
baskets on their original position as the illustration above.
Freezer
Fridge

16
Dis lay Controls
Use your appliance according to the following guidelines, your appliance has functions as
control panel shown in the pictures below.
Controlling the tem erature
We recommend that when you start your
refrigerator for the first time, the
temperature for the refrigerator is set to
4° and the freezer is set to -18° . If
you want to change the temperature,
follow the instructions below.
aution! When you set a temperature,
you set an average temperature for the
whole refrigerator cabinet. Temperatures
inside each compartment may vary from
the temperature displayed on the panel,
depending on how much food you store
and where you place them. Ambient
temperature may also affect the actual
temperature inside the appliance.
1. Fridge
Press the “ZONE” button until
the “Fridge” icon light up, then
press the “TEMP.” button to set
fridge temperature between 8° and
2° as needed, and control panel will
display corresponding figures
according to the following sequence.
2. Freezer
Press the “ZONE” button until
the “Freezer” icon light up, then
press the “TEMP.” button to set
freezer temperature between -14° and
-24° as needed, and control panel will
display corresponding figures according
to the following sequence.
3. Su er Cool
Super ool can refrigerate the
food quicker and keep food fresh
for a longer period.This is useful to
activate before inserting a large amount
of warm/room temperature food.
 Press the “MODE” button to activate
this function. The “Super ool” icon will
be illuminated and the fridge
temperature indicator will display 2° .
 Super ool will automatically turn
off after 3 hours.
 When Super ool function is on you
can turn it off by pressing the “MODE” or
setting fridge temperature. To manually
turn off the Super ool function, the
fridge temperature setting will revert
back to the previous setting.
4. Energy saving
Press the “MODE” button to turn
on the Energy saving function,
The “Energy saving” icon will be
illuminated.
 When the Energy saving function is
on, the temperature of fridge is
automatically switched to 6° and the
temperature of freezer is automatically
switched to -17° .
 When Energy saving function is on
you can switch it off by pressing the
“MODE” or “TEMP.” button and the
refrigerator temperature setting will
revert back to the previous setting.
5. Su er Freeze
Super Freeze will quickly lower
the temperature within the
freezer so food will freeze faster

17
than usual. This feature also helps to
keep vitamins and nutrition of fresh food
fresh for longer period.
 Press the “MODE” button to activate
this function. The “Super Freeze” icon
will be illuminated and the temperature
for the freezer is set to -24° .
 Super Freeze will automatically turn
off after 52 hours.
 When Super Freeze function is on
you can turn it off by pressing the
“MODE” or setting freezer temperature.
To manually turn off the Super Freeze
function, the freezer temperature setting
will revert back to the previous setting.
NOTE: When you selecting the Super
Freeze function, ensure there are no
bottled or canned drinks (especially
carbonated drinks) in the freezer
compartment. Bottles and cans may
explode.
6. POWER
Press and hold the
“POWER” button for three
seconds to turn the power function on or
off. When the power function is on, the
icon lights and the display board will
show “OF”. If no buttons have been
pressed, the display board will turn off
about 1 minute later.
 If you want to turn off the power
function, make sure the display board is
lighting up. If not, you can press any
button to light up the display board.
NOTE:
When the power function is on, the
refrigerator stops cooling.
7. Door Alarm
 When the door of fridge is open over
2 minutes, the control panel will show
“dr”, and the door alarm will stop about 8
minutes later.
 To save energy, do not keep the
door open for a long time when using the
refrigerator. In case of door alarm, it can
be turned off by closing the doors.

18
Using your a liance
Your appliance has the accessories as the “ Description of the appliance ” showed in
general, with this part instruction you can have the right way to use them. We recommend
that you read through them carefully before using the appliance.
Door rack
It is suitable for the storage of canned
liquid, bottled drinks and packed food, etc.
Do not place too many heavy things in the
racks.
Shelf in Refrigerator chamber
1.There are shelves in refrigerator
chamber, and they can be taken out to be
cleaned.
2.The crisper is suitable for storage of
vegetables and fruit, etc.
Firstly Pull the crisper out in level,
Secondly tip up it then you can take out
the crisper.
According to the opposite sequence you
can position the crisper rightly.
Freezer chamber
The freezer chamber is suitable for
storage of foods required to be frozen,
such as meat, ice.
Caution! Never close the freezer door
while the drawers, installation bracket, ice
tray are extended. It may damage the unit.
Ensure that drink bottles are not left in the
freezer for a longer time than needed as
freezing liquid may cause the bottle to
break.
Twistable ice tray
Twistable ice tray produce and store
abundant ice cubes.
1.Pull out the twistable ice tray from the
installation bracket.
2.Fill with drinking water below the
maximum level mark.
3.Place the filled ice tray back to bracket.
4.Await for around 3 hours, twist the knobs
clockwise and the ice will drop into the ice
box below.

19
Water Dis enser
The water dispenser, located in fridge door,
is used for storing drinking water. This
feature provides chilled water easily
without opening refrigerator.
You should
be informed of following tips.


 Before using
Please clean the water dispenser parts
before using this appliance for the first
time.
1. Hold two sides of the water tank tightly,
then pull up the water tank carefully by
shaking up and down.
2. Unscrew the head, then clean it, and
the inside of water tank (including large lid
and small lid).
3. Dry it in natural way or using a dryer.


Assembling
After cleaning, please assemble these
parts together, with reverse sequence of
cleaning procedure; and then fit them on
the door according to the following
procedure.
1. Insert the head into the hole on the door.
2. Fit the tank along the guides on the
door.
3. Press down on the two side of the tank.
4. When you hear a click sound, that
means the installation is completed.
①
②
③
④


 Filling water
Before you fill the drinking water into the
water tank, ensure that the water tank is
steady and in a correct position.
Caution!
Fill with water up to 3.5L (which is

20
suggested), and not above the level.
Otherwise, it may overflow when the lid is
close.
W e recommend that you fill the water by
the following ways.
Open the small lid by rotating it and fill
water from the inlet of the large lid. please
remember to rotate the small lid back to its
original position when finish filling water.
Warning!
--Don't touch other parts when filling water,
which may cause water leakage.
--Other beverage (milk, juice, carbonated
beverage etc.) were not suggested to be
filled in except for drinking water,
especially beverage including particles
(which may result in function failure).
--Hot water was forbidden to be filled into
the water tank.


 Receiving water
You should use the correct cups to receive
water underneath the water dispenser.
Warning!
--Don't push the water dispenser lever
forward without a cup below since it may
cause water spilling.
--To avoid cold air leaking out form cabinet,
keep the water dispenser parts (especially
the water storage box and head) still be
installed even if the water dispenser was
out of use.


 Cleaning
1. Put the water tank out of the door
carefully, and then wash the tank, lid, and
head lightly in water.
2. After you have successfully cleaned
the appliance, you should dry it by
natural drying or using the dryer.
3.If you have used the water dispenser
for many times, the water in the receiving
tank may drop on the floor, which may
make your floor wet, and you should
clean the tank with dry towel regularly
before overflow