Hisense RF21N1 Series Mounting instructions

Model number: RF21N1***
www.hisense-canada.com Customer care#:18553447367

This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
Do not use extension cords or
ungrounded (two prong) adapters.
of the appliance by a person responsible
for their safety.
Parts and features
Cyclopentane is used in the
insulation. The gases in the insulation
material require a special disposal
procedure. Please contact your local
a u t h o r i t i e s i n r e g a r d t o t h e
environmentally safe disposal of this
product.
Warranty 29
only.

115V/60Hz
525
grounded.

R134a
Do not store explosive substances such as
aerosol cans with a flammable propellant
in this appliance.
appliance.

Recommendation:
It is advisable for there to be at

°°

filled
What you need to have before start
1. Power drill and 1/4’’ drill bit
2. 1/2’’ or adjustable wrench
3. Flat blade and Philips head screwdrivers
4.You may find these items sold as
a kit at local hardware store.
Saddle-type
Shut offvalve
(1/4’’ outlet)
one 1/4’’
compression nut
1 ferrule
(sleeve)
5. These items are provided with your
fridge .Please check your fridge drawer
to find them.
1/4’’extension
tubing 1 Coupler 2 clips
Connecting to the water supply line
1.First ,shut off the main water supply.
2.Using the power drill and a 1/4’’ drill
bit drill into the cold water line and
connect the saddle-type shutoff valve.
3.Connect 1/4’’ extension tubing to shutoff valve
outlet.
4.Flush the tubing .Turn the main water supply on
and flush out the tubing until the water is clear.
Then , shut the water off at the water valve after
about quart of water has been flushed through
the tubing.
5.Connect the extension tubing line with the line
on the back of the fridge via the coupler .Fully
insert the extension tubing into the coupler ,
and then insert the clip onto the coupler to lock
up the tubing.Do the same with the other end.
After both clips are inserted ,check the line to
make sure it is held firmly by the clip.
Note:Ensure that water line does not get pinched
or bent when installing.This can result in improper
water flow through the line and will affect the
functionality of the fridge.
6.Turn the water on and check for leakage.
below
Clip
Connector
Water line Water line

Connect to potable water supply only.
lever
athat