Hisense RR33D6ABE Mounting instructions

RR33D6ABE

2
First use and Installation - - - - - - - - - - - - - 5
Description of the appliance - - - - - - - - - - -7
Brief introduction - - - - - - - - - - - - - - - - - - - 2
Operation - - - - - - - - - - - - - - - - - - - - - - - - 7
Helpful hints and tips - - - - - - - - - - - - - 9
Cleaning and care - - - - - - - - - - - - - - 10
Troubleshooting - - - - - - - - - - - - - - - -12
Disposal of the appliance - - - - - - - - - 13
Reversing the door- - - - - - - - - - - - - - 11
Thank you for choosing our products. We
are sure you will find your new appliance a
pleasure to use. Before you use the
appliance, we recommend that you read
through these instructions carefully, which
provides details about its usage and
functions.
Please ensure that all people using this
appliance are familiar with its operation
and safety features. It is important that you
install the appliance correctly and pay
attention to the satety instructions carefully.
We recommend that you keep this users
manual with the appliance for future
reference and retain it for any future users.
If you feel that the appliance is not
operating correctly, please check the
trouble shooting page for assistance. If
still in doubt contact the customer service
help line for assistance
It is important to use your appliance
that you follow
General safety and daily use
the guidelines below.
Store any food in accordance with the
storage instructions from the manufacturer.
Don’t try to repair the appliance yourself. It
is dangerous to alter the specifications or
modify this product in any way. Any
damage to the cord may cause short
circuit, fire or electric shock.
Don’t place hot items near the plastic
components of this appliance.
Frozen food must not be refrozen once it
has been thawed out.
Don’t store bottled or canned drinks
(especially carbonated drinks) in the
chiller compartment. Bottles and cans
may explode.
To avoid items falling and causing injury or
damage to the appliance, do not overload
the door racks or put too much food on the
shelves.
Important safety instructions - - - - - - - - - - - 2
at 1-877-465-3566
It's recommended
safely.
We recommend that you wait 4 hours with
the unit upright, before connecting the
appliance to allow the refrigerant to flow
back into the compressor.

3
WARNING-Do not use mechanical devices
or other means to accelerate the defrosting
process, other than those recommended by
the manufacturer.
WARNING-Do not damage the refrigerant
circuit.
WARNING-If the power cord is damaged, it
must be replaced by the manufacturer, its
service agent or similarly qualified persons
in order to avoid a hazard.
WARNING-Keep ventilation openings in the
appliance enclosure, or in the built-in
structure, clear of obstruction.
WA R N I N G - W h e n disposing of t h e
appliance, do so only at an authorized waste
disposal center. Do not expose to flame.
WARNING-Do not store explosive or
substances such as aerosol cans with a
flammable propellant in this appliance.
Safety for children and infirm persons
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or a lack of experience and
knowledge, unless they have been given
supervision or instruction concerning the use
of the appliance by a person responsible for
their safety. Children should be supervised
to ensure that they do not play with the
appliance.
Keep all packaging away from children to
avoid risk of suffocation.
Protect children from being scalded by
touching the very hot compressor at the
rear bottom of the appliance.
Don’t place items on top of the appliance
as this could cause injury should they fall
off.
Never allow children to play with the
appliance by hanging or standing over or
on the door, racks, and shelves etc.
WARNING
take off the doors. Leave all the shelves in
place so that children may not
easily climb inside.
Safety about electricity
To avoid the risks that are always
present when using an electric
appliance, we recommend that you pay
more attention to the instructions about
electricity below.
Unpack the appliance and check through
the appliance. Should any damage be
evident, don’t plug in the appliance, but
contact the shop immediately from which
you purchased it. Keep all packing
materials in this case.
The appliance must be supplied with single
phase alternating current of 115V/60Hz.
The main plug must be accessible when
the appliance is installed.
This appliance must be grounded. Do not
use ungrounded (two prong) adapters.
-This appliance is fitted with a ground plug in
accordance with local standards. The
ground plug should be suitable for use in all
houses fitted with sockets in accordance
with current specifications. If the outlet isn’t
suitable for the grounded plug, do not cut off
the ground prong. Instead, please contact a
qualified, registered electrician to install the
correct outlet.
Do not use extension cords or multiple
sockets which could cause overloading of
wiring circuits and could cause a fire,
Always plug your appliance into its own
individual electrical socket which has a
voltage rating that matches the rating plate.
Make sure that the plug is not squashed or
damaged. Damage may cause short
circuit, electric shock or overheat and even
cause a fire.
Do not insert the main plug and use the
appliance if the socket is broken. There is
a risk of electric shock or fire.
Switch off the appliance and disconnect it
from the main power before you clean or
move it.
When disposing of the appliance,
-

Never unplug the appliance by pulling on
the electrical cord. Always grip the plug
firmly and pull straight out from the socket
to prevent damaging the power cord.
Any electrical component must be replaced
or repaired by a qualified electrician or
authorized service engineer.
Only genuine parts should be
WARNING-Do not use electrical appliances
inside the food storage compartments of the
appliance, unless they are of the type
recommended by the manufacturer.
Check the compressor label on the rear of
the appliance to see which refrigerant is
used for your appliance.
If the appliance contains iso-butane
( R 6 0 0 a ) r e f r i g e r a n t , w h i c h i s
environmentally friendly but flammable,
ensure that tubing of the refrigerant circuit
is not damaged during transportation and
installation to avoid risk of fire caused by
leaking refrigerant.
Keep burning candles, lamps and other
items with naked flames and sources of
ignition away from the appliance and
ventilate the room thoroughly to avoid
the risk of fire and eye injury should
any leakage of refrigerant (R600a) exist.
Do not store products which contain
flammable propellants (e.g. spray cans or
explosive substances) in the appliance.
The appliance contains a small
quantity of refrigerant (R600a) in the
The refrigerant and risk of fire
4
refrigerant circuit.
Hisense service
used.

Warning! Before installing, read the
instruction carefully for your safety
and correct operation of the appliance.
5
Stand your appliance in a dry place to
avoid high mosture.
Appliances must not be exposed to rain.
Sufficient air must be allowed to circulate in
the low rear section of the appliance, as
poor air circulation can affect performance.
should be positioned away from
heat sources such as heaters and direct
5
Important!
For this reason,
space should be
available around the . It is
advisable for there to be
separating the back of the to
the wall at least of space
on its two of over
from its top and a clear space
in front to allow the doors to open 180°.
It is necessary to have good
ventilation around the refrigerator to allow for
the dissipation of heat, high efficiency, and
low power consumption.
sufficiently cleared
refrigerator
refrigerator
sides, a height
First use and Installation
Cleaning before use
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and
some neutral soap so as to remove the
typical smell of a brand new product, then
dry thoroughly.
Important! Do not use detergents or
abrasive powders, as these will damage the
finish.
Installation Positioning
This appliance performs well within the
Ambient temperature from 55 deg F /
12.8℃ to 110 deg F / 43.3
It may not work properly if being left at a
temperature above or below the indicated
range for a long period.
℃.
State of California Proposition 65 Warnings:
WARNING:This product contains one or more chernicals known to the State of California to
cause cancer.
WARNING:This product contains one or more chernicals known to the State of California to
cause birth defects or other reproductive harm.
Keep the appliance out of direct sunlight
rain or frost. Stand the appliance away
from heat sources such as stoves, fires or
heaters.
Installing the rubber anti-tip pad
If there is a rubber anti-tip pad and
a screw provided in a plastic bag with
your appliance ,you must install these
accessories according to the following
procedure.
lo wer base cover
1.Tilt appliance to find screw hole on the
left of lower base cover.
75 mm / 3 inches
100 mm / 4 inches 100 mm /
4 inches
Appliances
sunlight.
75 mm / 3 inches
100 mm / 4 inches
100 mm / 4 inches
Note:
There is no need to install these accessories under
normal usage, Only under the extreme circumstance,
cabinet empy while load on door with local mass of
10 kg / 22 pounds and opening the door about 90
degree, this refrigerator may take risk of tipping, Then
anti-tip should be fastened to the lower base cover to
steady this appliance.

rubber supporting pad
scr e w
6
2.Put screw into the hole of rubber
supporting pad.
Leveling
The appliance should be level in order to
eliminate vibration. To make the appliance
level, it should be upright and both
adjusters should be in firm contact with
the floor. You can adjust the level by
screwing in or out to the appropriate
level from the front (use your fingers or a
suitable spanner).
Electrical connection
Caution! Any electrical work required to
install this appliance should be carried out
by a qualified or competent person.
Warning! This appliance must be grounded.
The manufacture declines any liability
should these safety measures not be
observe.
3.Make screw in alignment with the hole
on lower base cover . Fasten rubber
supporting pad to the base cover firmly
by a phillips s crew driver (not included).
phillips screw drawer

High ambient temperatures (e.g. on hot
summer days) and a colder setting
(position 6 to 8) on the temperature
regulator can cause the compressor to
run continuously or even non-stop!
Setting “0 ” means no cooling
Turning the temperature control to "0"
position stops the cooling cycle, but
does not shut off the power to the
refrigerator.
T u r n i n g c l o c k w i s e i n d i r e c t i o n
. If the unit is
unplugged, power lost, or turned off, you
must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before
this time delay, the refrigerator will not
start.
Setting “8”(end-stop)
Normally we advise you select setting of
3 or 4, if you want the temperature
warmer or colder please turn the knob to
lower or higher setting accordingly.
Insert the plug
into the
The temperature
selector knob is located on the side
of the chiller compartment.
can lead to
the more energy efficiency.
Reason: when the ambient
temperature is high, the
c o m p r e s s o r m u s t r u n
continuously to maintain the
l o w t e m p e r a t u r e i n t h e
appliance.
1.Cabinet
2. doorChill Compartment
4.
Defrosting tray
5.
Removable shelf
6.
Crisper box cover part
7.
Lower door bin
10
Small door bin
Refrigerator door
.Temperature regulator
8.
9.
Bottle holder
Description of the appliance
7
Operation
Note: Due to continual modification of our products, your refrigerator may be slightly different
from this instruction Manual, but its functions and usage methods remain the same.
Starting up and temperature regulation
Important!
Important!
3.
1
2
3
4
5
6
8
7
6
5
4
3
2
1
0
10
9
7
8
CAUTION: Wait for 4 hours
with the unit upright, before connecting the
appliance to allow the refrigerant to flow
back into the compressor.
with earth ground. electrical outlet
turns the cooling cycle on
Setting "8" is the coolest possible temperature
setting.
Raising the temperature settingAs the
temperature setting is decreased, it's likely that
more energy will be consumed.
For safe food preservation, a
temperature of 39 deg F or less must be
maintained in the refrigerator
Warning:

Remove and install the door shelf
Remove the door shelf
press inwardly
press inwardly
Install the door shelf
Warning:The door shelf must not removed
and installed by the user! If the door shelf
is damaged ,contact the customer helpline
for assistance .To replace the door shelf,
the below steps can be followed:
Firstly tilt the left side of the door shelf,
and make sure the notch has been
fastened to the door .Then press the
right side inwardly ,pushing it down into
place.
Press the right side of the door shelf
inwardly ,while holding the left side .
When the notch of the shelf has been
detachesd from the refrigerator door,
remove the rack obliquely upwardly .
8
Using your appliance
Your appliance has
Door bins
Suitable for the storage of canned liquid,
bottled drinks and packaged food, etc.
Do not place too many heavy things in
the bins.
Shelf in Refrigerator compartment
There are shelves in the refrigerator
compartment and they can be taken out to
be cleaned.
Chiller compartment
This is a low temperature
compartment intended specifically for
the
the features shown below,
which are described in the "Description" section
of this manual. Please note these usage tips and
instructions.
temporary storage of frozen items.

Helpful hints and tips
Energy saving tips
We recommend that you follow the tips
below to save energy.
Hints for fresh food refrigeration
Hints for refrigeration
Hints for the storage of frozen food
Switching off your appliance
If the appliance needs to be switched off for
an extended period, the following steps
should be taken prevent mould on the
appliance.
1. Remove all food.
3. Clean and dry the interior thoroughly.
4. Ensure that all the doors are wedged
open slightly to allow air to circulate.
9
Try to avoid keeping the door open for
long periods in order to conserve energy.
Ensure the appliance is away from any
sources of heat (Direct sunlight, electric
oven or cooker etc).
Don’t set the temperature colder than
necessary.
Don’t store warm food or evaporating
liquid in the appliance.
Place the appliance in a well ventilated,
humidity free, room. Please refer to the
instructions on installing your new
appliance.
T h e d i a gr a m s h o w s t h e c o r r e c t
combination for the shelves, designed to
be the most energy efficient configuration.
Do not place hot food directly into the
refrigerator or ,
as the internal temperature will increase
resulting in the compressor having to work
harder and will consume more energy.
Chiller compartment
Cover or wrap the food particularly if it has
a strong flavor.
Place food properly so that air can
circulate freely around it.
Meat (All Types) Wrap-ped in PVDC
(plastic) wrap:
Wrap and place on the shelf. Always
follow food storage times and use by
dates suggested by manufacturers.
Cooked food, cold dishes, etc.:
Dishes should be covered and may be
placed on any shelf.
Fruit and vegetables:
Fruit and vegetables should be wrapped
and stored under the Crisper box cover
part.
Butter and cheese:
Be wrap in airtight foil or plastic film wrap.
Milk bottles:
Bottles should have a lid and be stored in
the door racks.
Once defrosted, food will deteriorate
rapidly and should not be re-frozen. Do
not exceed the storage period indicated
by the food manufacturer.
2. Remove the plug from the electrical outlet.
Only store frozen items temporarily in the
Chiller compartment. This compartment is
not intended for freezing, or long term
storage of frozen items.

Cleaning and care
Cleaning and Care
The appliance interior, including interior
accessories, should be cleaned regularly.
The refrigerator should be cleaned and
maintained at least every two months.
Warning! Danger of electrical shock!
The appliance should not be connected to
the during cleaning.
Before cleaning, switch the appliance
off and remove the plug from the
or switch off or turn out the circuit
Important!
Never clean the appliance with a steam
cleaner. Moisture could accumulate in
electrical components,
Hot vapors can lead to the damage of
plastic parts.
Ethereal oils and organic solvents can
attack plastic parts, e.g. lemon juice or the
juice from orange peel, butyric acid,
cleanser that contain acetic acid.Do not
allow such substances to come into
contact with appliance parts.
Do not use any abrasive cleansers.
Clean the appliance and the interior
accessories with a cloth and lukewarm
water. Commercially available dish
washing detergents may also be used.
Remove the food from the appliance
before cleaning. Store in a cool
place, well covered.
After everything is dry place appliance
back into service.
A frost layer
is more
than thick,
defrost.
Defrosting
Defrosting
Why defrosting
After cleaning wipe with fresh water and
clean dish cloth.
10
Warning!
defrosting tray before
You need to lift the
defrosting, take the food out; take the
ice tray out or put it into the refrigerator
chamber temporarily, then set the knob
o f t h e t e m p e r a t u r e r e g u l a t o r t o
position “0”(where the compressor will
stop working) , leave the door of the
refrigerator open until ice and frost
Wipe off the water with
soft cloth. To speed up the process of
defrosting, you may put a bowl of warm
water (about ) into
the Chiller compartment, and
scrape away the ice and frost with a
defrosting spatula. After doing so, be
sure to set the knob of the temperature
regulator to the original position.
It is not advisable to heat the
Chiller compartment directly with hot
water or a hair dryer while defrosting to
avoid deformation of the inner case.
It is also not advisable to scrape off ice
and frost or separate food from the
containers which have been congealed
together with the food with sharp tools
or wooden bars, so as not to damage
the inner casing.
power supply
electrical
outlet,
circuit breaker or fuse.
may form inside the refrigerator
after continuous usage. If the frost
10mm (3/8 inches) you should
Defrosting is operated manually.Before
dissolves thoroughly, and accumulates in
the drip tray.
50 deg C / 120 deg F
you remove it.

Reversing the door
The side at which the door opens can be
changed from the right side (as supplied)
to the left side, if the installation site
requires.
Tools you will need:
1. 8mm socket driver.
2.Phillips screwdriver.
3.Putty knife or thin-blade screwdriver.
Before you start, lay the refrigerator on it’s
back in order to gain access to the base. You
should rest it on soft foam packaging or
similar material to avoid damaging the cooling
pipes at the rear of the refrigerator.
1.Remove the upper hinge core, transfer it to
left side and tighten securely, then put the
in a safe place.
2. Remove both adjustable feet 、the bottom
hinge bracket and the
by unscrewing the bolts. Then
the following
rubber supporting pad
3. Replace the door by fitting the upper hinge
core into the upper door's hole, securing it
with the 2 screws. Replace the screw
covers.
Warning!
When changing the side at which the
door opens, the appliance must not be
connected to Remove plug
from the beforehand.
11
screw covers
re-attach them
according to pictures.
electrical power.
power outlet

12
Troubleshooting
If you experience a problem with your appliance or are concerned that the appliance
is not functioning correctly, you can carry out some easy checks before calling
below.
Warning! Don't try to repair the appliance yourself. If the problem persists after you
have made the checks mentioned below, contact an authorized
Problem Possible cause Solution
Appliance does not
work.
Appliance cools too
much.
Appliance is not switched on.
Electrial plug is not plugged in or
is loose.
Fuse has blown or is defective.
Socket is defective.
Temperature is set too cold.
Switch on the appliance.
Insert electrial plug.
Check fuse, replace if necessary.
Must be corrected by an
Turn the temperature regulator to
a warmer setting temporarily.
The food is too warm.
Unusual noises.
The compressor does
not start immediately
after changing the
temperature setting.
Water on the floor or
storage shelves.
Temperature is not properly
adjusted.
Door was open for an
extended period.
A large quantity of warm food
was placed in the appliance
within the last 24 hours.
The appliance is near a heat
source.
Door seal is not air-tight
(possibly after reversing the
door).
Appliance is not level.
The appliance is touching the
wall or other objects.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
This is normal, no error has
occurred.
Check that the Drip tray is housed
properly. Drip tray is full of water.
Please look in the “initial Start Up”
section.
Open the door only as long as
necessary.
Turn the temperature regulation
to a colder setting temporarily.
Please look in the “installation
location” section.
Carefully warm the leaking
sections of the door seal with a
hair dryer(on a cool setting). At
the same time shape the warmed,
adjust the door seal by hand such
that it sits correctly..
Readjust the feet.
Move the appliance slightly.
If necessary, carefully bend the
component out of the way.
The compressor starts after a
period of time.
See the “cleaning and care”
section.
Heavy build-up of
frost, possibly also on
the door seal.
Hisense Customer Service per
Hisense servicer.
electrician.

Disposal of the appliance
It is prohibited to dispose of this appliance as household waste.
Before disposal of the appliance
1. Pull out the electrial plug from the mains socket.
2. Cut off the power cord and discard together with the electrial plug.
Warning! Refrigerators contain refrigerant and gases in the insulation.
Refrigerant and gases must be disposed of professionally as they may cause
eye injuries or ignition. Ensure that tubing of the refrigerant circuit is not
damage prior to proper disposal.
Correct Disposal of this product
This symbol on the product or in its packing indicates that this
product may not be treated as household waste. Instead, it should
be taken to the appropriate waste collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could
otherwise be caused by the inappropriate waste handling of this
product. For more detailed information about the recycling of this
product, please contact your local council your household waste
disposal service, or the shop where you purchased the product.
13
Dispose of this appliance in accordance with Federal and Local regulations. Refrigerants
disposal.
must be evacuated before

LIMITED WARRANTY FOR HISENSE
TM
REFRIGERATORS, FREEZERS AND WINE COOLERS
Congratulations on your urchase!
IMPORTANT: Just in case your newly urchased Refrigerator, Freezer or Wine Cooler
needs to be serviced, lease kee the original ackaging materials and original recei t.
Hisense USA Corporation ("Hisense"), hereby warrants to the first end user consumer purchaser
(“Purchaser”) for this Hisense
M
Refrigerator, Freezer or Wine Cooler (“Product”), when shipped in its
original container and sold or distributed in the United States and Puerto Rico by an authorized Hisense
dealer, and provided that this Product was not sold either “as is”, “with all faults”, “sales final” or per
similar terms, that this Product will, during the applicable warranty period as stated solely in this Limited
Warranty, be free from defects in material and workmanship. Hisense will, solely within the applicable
warranty period, and at Hisense’s sole discretion, either repair the defective Product or provide the
Purchaser with a like new or refurbished roduct of similar or better quality.
HOW TO GET WARRANTY SERVICE :
Warranty service may be obtained by contacting Hisense using any of the methods below. Proof of
purchase in the form of an original bill of sale or receipted invoice with a legible date of purchase that
evidences the Product is within the applicable warranty period must be presented to Hisense in order to
obtain warranty service. Our contact information is provided below. Hisense will respond to warranty
requests within a commercially reasonable time.
Warranty Service and Troubleshooting Information
for Customers in the United States and Puerto Rico
o obtain warranty service and troubleshooting information, contact the
Hisense Consumer Care Center.
Call 1-877-465-3566 (Monday–Friday from 9 a.m. - 9 p.m. ES ,
Saturday–Sunday from 9 a.m. - 6 p.m.) or
Email [email protected] or visit our website www.hisense-usa.com.
ON-SITE SERVICE:
Certain Products, as stated herein, are eligible for on-site service at Hisense’s sole discretion. o obtain
on-site service, Purchaser must call or email Hisense as described above to trouble-shoot the issue with
the Product. On-site service may not be available in certain locations where an authorized service
provider is not available. An authorized service provider is considered unavailable if the Purchaser’s
location exceeds fifty (50) miles from the service provider’s business address. In the event that on-site
service is not available, Hisense will, at its sole discretion, replace the Product with a new or refurbished

similar Product of equal or greater value, or refund the purchase price of the Product to the Purchaser.
On-site service requires that our authorized service provider be given clear, complete, unobstructed and
easy access to the front, sides and rear of the Product. On-site service does not include that the service
provider removes, reinstalls or transports the Product. It is possible that certain on-site repairs will need
to be completed off site, and at Hisense's discretion, require that the Product to be shipped directly to
Hisense’s authorized service center. Once Hisense receives the Product and repairs or replaces it,
Hisense will return the repaired/replaced Product back to the Purchaser.
TERMS AND CONDITIONS:
his limited warranty shall not apply to:
(a) Any defects caused or repairs required as a result of: abusive operation; negligence; accident;
shipment damages; improper delivery and installation; installation not in accordance with electrical or
plumbing codes; leaky, broken, frozen pipes or restricted drains; inadequate air supply; damages caused
by improper packaging by Purchaser; application and use for which this Product was not intended as set
forth in the user’s manual or other applicable Product documentation.
(b) Any defects caused or repairs required as a result of any Product that has been tampered with,
modified, adjusted or repaired by any person other than Hisense, a Hisense authorized service provider or
a Hisense authorized service center or dealer.
(c) Any replacement of accessories, handles, glassware, shelving, racking, trays, consumable or peripheral
items required through normal use of the Product, including but not limited to, batteries, filters, bulbs,
fuses, etc.
(d) Any cosmetic damage to the Product surface or exterior, including but not limited to that which has
been defaced or caused through normal wear and tear, improper shipping and handling or the use of
chemical cleaning agents.
(e) Any defects caused or repairs required as a result of damage caused by any external or environmental
conditions, including but not limited to, use of incorrect voltage, fluctuations or surges in transmission
line/power line/generator voltage, liquid spillage, or acts of nature or of God.
(f) Warranty claims for Products returned with altered, illegible or missing model, factory serial number
and UL markings.
(g) Any Products used for rental, business or commercial purposes.
(h) Any installation, consumer instruction, delivery, setup, adjustment, and/or programming charges.
(i) A Product that is not installed in accordance with installation instructions included with the Product.
(j) Any third-party accessories or add-on’s.
(k) Food or drink losses due to any sealed system failures.
No other entity other than Hisense is authorized to extend, enlarge or transfer this warranty on behalf of
Hisense.
he express warranties in this limited warranty are, in lieu of and, except to the extent prohibited by
applicable law, Hisense disclaims all other warranties and conditions, express or implied, whether arising
by law, statute, by course of dealing or usage of trade, including, without limitation, implied warranties or

conditions of merchantability and/or quality, fitness for a particular use or purpose, and/or
non-infringement. Hisense does not warrant uninterrupted or error-free operation of this Product.
Limitations: (a) Hisense shall not be liable for any incidental, special, consequential, economic,
exemplary or indirect damages of any kind or nature (including lost profits or damages for loss of time or
loss of use or loss of data) arising from or in any connection with the use or performance of a Product or a
failure of a Product, even if Hisense is aware of or has been advised of the possibility of such damages; (b)
the remedies described in this limited warranty constitute complete fulfillment of all obligations and
responsibilities of Hisense to the Purchaser with respect to the Product and shall constitute full
satisfaction of all claims, whether based in contract, negligence, strict liability or otherwise. Some States
do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
WARRANTY PERIODS:
All warranty periods shall be calculated from the date of original purchase by the Purchaser.
• Com act Refrigerators (6.5 cu. ft. or less): One (1) year for parts and labor (replacement Product
and parts assume the remaining original warranty period, or ninety (90) days, whichever is longer).
NOT ELIGIBLE FOR ON-SITE SERVICE.
• Refrigerators (over 6.5 cu. ft.):
o One (1) year for parts and labor (replacement Product and parts assume the remaining
original warranty period, or ninety (90) days, whichever is longer).
o Five (5) years for parts and labor on the sealed system (i.e. compressor, evaporator,
condenser, drier, connecting tubing) only. All other parts and labor are excluded from this
five (5) year warranty.
o ONLY REFRIGERATORS WITH A STATED INTERNAL CAPACITY OVER 12.0
CUBIC FEET ARE ELIGIBLE FOR ON-SITE SERVICE.
• Chest Freezers (over 5 cu. ft.):
o One (1) year for parts and labor (replacement Product and parts assume the remaining
original warranty period, or ninety (90) days, whichever is longer).
o Five (5) years for parts and labor on the sealed system (i.e. compressor, evaporator,
condenser, drier, connecting tubing) only. All other parts and labor are excluded from this
five (5) year warranty.
o CHEST FREEZERS ARE NOT ELIGIBLE FOR ON-SITE SERVICE.
• Wine Coolers:
o Two (2) years for parts and labor (replacement Product and parts assume the remaining
original warranty period, or ninety (90) days, whichever is longer).
o Five (5) years for parts and labor on the sealed system (i.e. compressor, evaporator,
condenser, drier, connecting tubing) only. All other parts and labor are excluded from this
five (5) year warranty.
o ONLY WINE COOLERS WHICH HAVE BEEN BUILT-IN OR INSTALLED IN AN
UNDER-COUNTER APPLICATION WILL BE CONSIDERED FOR ON-SITE
SERVICE. “BUIL -IN” MEANS INS ALLED IN SUCH A MANNER AS O BE

CONSIDERED HAVING BEEN A ACHED IN A PERMANEN OR
SEMI-PERMANEN MANNER O HE PURCHASER’S HOME.
• Accessories: Ninety (90) days for parts and labor.
his Warranty is only valid in the United States and Puerto Rico and only applies to Products
sold/distributed and serviced in the United States and Puerto Rico.
NO WARRANTIES (WHETHER EXPRESS OR IMPLIED) INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE SHALL APPLY AFTER THE EXPRESS WARRANTY PERIOD
STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN (BY
ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT) SHALL BE
BINDING ON HISENSE. THIS WARRANTY IS THE EXCLUSIVE WARRANTY WITH
RESPECT TO THE PRODUCT AND HISENSE IS THE EXCLUSIVE WARRANTY PROVIDER
FOR THE PRODUCT. REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDY OF
THE CONSUMER. HISENSE SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE
THE PRODUCT. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY
AGAINST HISENSE SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT
SOLD BY HISENSE. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER
THAN THE ORIGINAL END USER CONSUMER PURCHASER OF THE PRODUCT AND IS
NOT TRANSFERABLE.
Some States do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation
of incidental or consequential damages or allow limitations on warranties; therefore, the limitations or
exclusions stated above may not apply to Purchaser, solely within those specific States. his warranty
gives you specific legal rights, and you also may have other rights which vary from State to State. his
warranty applies to the maximum extent not prohibited by law.
CUSTOMER RECORD
Please fill and retain for your records, along with proof of original purchase.
You do not need to send us this warranty card to receive warranty service.
Date of Purchase: ........................................... Store/Dealer: .........................................................
Model No.: ..................................................... Serial No.: .............................................................

MANUAL DE INSTRUCCIONES
Antes de poner en marcha la unidad, lea atentamente
el manual y consérvelo para referencia futura.
Español
RR33D6ABE

2
Hisense Refrigerator
Tabla de Contenido
Introducción General..................................2
Instrucciones importantes de seguridad... 2
Primer uso e instalación..........................5
Descripción del electrodoméstico.........7
Funcionamiento.....................................7
Sugerencias y consejos de ayuda........9
Limpieza y cuidado..............................10
Inversión de la puerta..........................11
Solución de problemas........................12
Eliminación del electrodoméstico........13
Introducción General
Gracias por seleccionar nuestros
productos. Estamos seguros de que
usted encontrará su nuevo aparato
como un placer de usar. Antes de utilizar
el aparato, recomendamos que lea
detenidamente estas instrucciones, que
proporcionan los detalles sobre su uso y
funciones.
Por favor asegúrese de que todas las
personas que utilizan este aparato estén
familiarizadas con sus operaciones y
funciones de seguridad. Es importante
que instale el aparato correctamente y
preste atención a las instrucciones de
seguridad cuidadosamente.
Recomendamos que preserve este
manual de usuario con el aparato para
la referencia futura y consérvelo para los
usuarios futuros.
Si siente que el electrodoméstico no
está funcionando adecuadamente, por
favor vea la página de Resolución de
problemas para obtener ayuda. Si aún
tiene dudas, póngase en contacto con la
línea de ayuda de atención al cliente
para obtener asistencia o para
programar una visita a domicilio de un
ingeniero de servicio autorizado.
Instrucciones importantes de seguridad
Seguridad General y Uso Diario
Es importante utilizar su
aparato de manera segura.
Recomendamos que siga los
consejos siguientes
Preserve los alimentos de acuerdo
con las instrucciones de
almacenamiento desde el fabricante.
No trate de hacer usted mismo la
reparación del electrodoméstico. Es
peligroso alterar las especificaciones o
modificar este electrodoméstico de
alguna manera. Cualquier daño al cable
puede causar cortocircuitos, incendios o
descargas eléctricas.
No coloque las cosas calientes cerca
de los componentes de plástico de este
aparato
Los alimentos congelados no deberán
ser re-congelados después de su
descongelación.
No almacene las bebidas
embotelladas o enlatadas
(especialmente las bebidas
carbonatadas) en el compartimiento del

3
Hisense Refrigerator
congelador. Las botellas y latas pueden
explosionar.
Para evitar la caída de objetos y
causar lesiones o daños al aparato, no
sobrecargue los estantes de la puerta ni
coloque demasiados alimentos en los
estantes.
ADVERTENCIA- No utilice dispositivos
mecánicos u otros medios para acelerar
el proceso de descongelación a menos
que estén aprobados por el fabricante.
ADVERTENCIA- No dañe el circuito
refrigerante.
ADVERTENCIA- Si el cable de
alimentación está dañado, lo debe
reemplazar el fabricante, el agente de
servicio o una persona similar calificada
para evitar peligros.
ADVERTENCIA- Mantenga las
aberturas de ventilación en el gabinete
del electrodoméstico, o en la estructura
integrada, libre de obstrucciones.
ADVERTENCIA- Cuando se deshaga
del electrodoméstico, hágalo sólo en el
centro de desperdicios autorizado. No lo
exponga al fuego.
ADVERTENCIA- No almacene
explosivos o sustancias como latas de
aerosol con carburante inflamable en el
electrodoméstico.
Seguridad para niños y las personas
débiles
Este aparato no está
diseñado para ser utilizado
por las personas
(incluyendo los niños) con
discapacidades físicas, sensoriales o
mentales, o la falta de experiencia y
conocimiento, a menos que sea n
supervisadas o instruidas acerca del uso
del aparato por una persona
responsable de su seguridad. Los niños
deberán ser supervisados para asegurar
que no jueguen con el aparato.
Mantenga todos los envases
apartados de los niños para evitar el
riesgo de asfixia.
Proteja a los niños contra la
quemadura mediante el toque del
compresor muy caliente en el fondo
trasero de la espalda.
No coloque los objetos en la parte
superior del aparato ya que eso puede
causar lesión personal si se caen.
Nunca permita que los niños jueguen
con el aparato suspendiéndose o
manteniéndose de pie sobre o en las
puertas, estantes, bastidores o estantes,
etc.
ADVERTENCIA- Quite las puertas. Deje
todos los estantes en el lugar para que
los niños no trepen fácilmente.
Seguridad Eléctrica
Para evitar los riesgos que
están siempre presentes
cuando utiliza un aparato
eléctrico, recomendamos que preste
más atención a las instrucciones sobre
electricidad a continuación.
Desembale el aparato y verifíquelo
completamente. Si existen algunos
daños evidentes, no enchufe el aparato
sino póngase en contacto inmediato con
la tienda desde donde lo compró.
Preserve todos los materiales de
embalaje en este caso.
Recomendamos que espere durante 4
horas antes de conectar el aparato a la
electricidad con el fin de permitir que el
refrigerante regrese al compresor.
El aparato deberá ser enchufado en la