Hisense RR53D6AAE Mounting instructions

WARNING-Take off the doors. Leave all
the shelves in place so that children may
not easily climb inside.

Installing the rubber supporting pad
If there is a rubber supporting pad and a
screw provided in a plastic bag with your
appliance, you can install these
accessories according to the following
procedure.
Note:
yThere is no need to install these
accessories under normal usage.
Only under the extreme circumstances,
that is, cabinet empty while load on door
with total mass of 16 kg (including 2 L
water in water storage box) and opening
the door about 90 degree, this refrigerator
may take risk of tipping. Then rubber
supporting pad should be fastened to the
lower base cover to steady this appliance.
1. Tilt appliance to find screw hole on the
left of lower base cover.
lower base cover
2. Put screw into the hole of rubber
supporting pad.
rubber supportin
g
pad
screw
3. Make screw in alignment with the hole
on lower base cover. Fasten rubber
supporting pad to the base cover firmly by
a cross screwdriver (self-provided).
cross screwdriver

State of California Proposition 65 Warnings:
WARNING:This product contains one or more chernicals known to the State of California to cause cancer.
WARNING:This product contains one or more chernicals known to the State of California to cause birth
defects or other reproductive harm.