Hitachi 32LD8D20E A User manual

32LD8D20E A
GB
D
F
I
Instructionsforuse
Bedienungsanleitung
Notice d'utilisation
Istruzioni per l'uso
Digital LCD olo r TelevisionCu
Televisione a Colori LCD Digitale
Digitales LCD-Farb-TV-Gerät
Télévision Couleur LCD Digital

GB -1-
Contents
Sound Mode .......................................... 22
AVL....................................................... 22
Effect .................................................... 22
Dynamic Bass ....................................... 22
Subwoofer............................................ 22
Store ..................................................... 22
Features Menu ............................................ 22
SleepTimer ........................................... 22
ChildLock.............................................. 22
Language .............................................. 22
EXT2Out ............................................... 22
PCAudioIn ............................................ 23
Blue Background................................... 23
Menu Background ................................. 23
MenuTimeout ........................................ 23
Teletext Language................................. 23
Default Zoom......................................... 23
InstallMenu ................................................. 23
Program Table ....................................... 23
Name: ......................................................... 23
Insert: ........................................................ 23
Delete:........................................................ 23
APS(AutoProgrammingSystem) ............... 24
A.P.S. (Auto Programming System)
Country ................................................. 24
Program ................................................ 24
Band ..................................................... 24
Channel................................................. 24
Colour System....................................... 24
Sound System....................................... 24
FineTune .............................................. 24
Search .................................................. 24
Store ..................................................... 24
Install menu inAV modes ...................... 24
ColourSystem............................................ 25
VCR ............................................................ 25
Store ..................................................... 25
Source menu............................................... 25
PC Mode .......................................................... 25
Installation ................................................... 25
Menu System in PC mode ............................ 25
Sound Menu/Feature Menu ................... 25
PCPicture Menu .................................... 25
PCPOSITIONMenu................................ 25
Autoposition .......................................... 25
H (Horizontal) Position........................... 26
V (Vertical) Position .............................. 26
Phase .................................................... 26
DotClock ............................................... 26
SoundinPCmode ................................. 26
Other Features............................................... 26
TV Status .................................................... 26
MuteIndicator .............................................. 26
AV Modes ................................................... 26
Personal Preference ................................... 26
Zoom Modes ............................................... 26
Safety Precautions .......................................... 3
Features ............................................................ 5
Accessories..................................................... 5
Rear View and Peripheral Connections ...... 6
Remote Control Buttons ................................ 7
Preparation ..................................................... 10
Before Switching On Your TV ...................... 10
Power Connection....................................... 10
Connections To The Aerial Input Socket ...... 10
Inserting Batteries In The Remote Control
Handset....................................................... 10
Handlingthe Remote Control ....................... 10
Operating Range for the Remote Control..... 10
Switching The TV ON/OFF ..............................11
Navigating the Menu System ........................11
Initial Settings .................................................11
Everyday Operation ....................................... 12
Information Banner ...................................... 12
ELECTRONICPROGRAMMEGUIDE(EPG)..... 12
Displaying The Subtitles .............................. 13
Teletext........................................................ 13
DTV Menu System ......................................... 13
Channel List ................................................ 13
Navigating the whole channel list.......... 14
Moving the channels in the channel list . 14
Deleting the channels in the channel list 14
Renaming channels............................... 14
Adding locks to channels ...................... 15
Setting Favourites ................................. 15
How To Add A Channel To A Favourite List:15
On Screen Help Pressing INFO Button ..... 15
Installation ................................................... 16
Configuration............................................... 17
Timers ......................................................... 19
TV Setup ..................................................... 20
CommonInterface ....................................... 20
Analogue TV Menu System ......................... 21
PictureMenu ............................................... 21
Mode ..................................................... 21
Contrast/Brightness/Sharpness/Colour/
Hue ....................................................... 21
ColourTemp .......................................... 21
Noise Reduction .................................... 21
FilmMode .............................................. 21
PictureZoom ......................................... 21
Reset .................................................... 21
Store ..................................................... 21
Sound Menu ................................................ 21
Volume .................................................. 21
Equalizer ............................................... 21
Balance ................................................. 21
Headphone............................................ 21
volume ........................................................ 21
sound mode ................................................ 22
balance ...................................................... 22

GB -2-
Auto: ..................................................... 26
Zoom: .................................................... 26
Cinema: ................................................. 26
16:9 Zoom: ............................................ 26
Subtitle: ................................................. 26
4:3......................................................... 27
14:9 Zoom: ............................................ 27
Panoramic: ............................................ 27
Freeze Picture ............................................. 27
Teletext............................................................ 27
Special Teletext Functions ........................... 27
Fastext ........................................................ 28
For Fastext............................................ 28
TOPtext ...................................................... 28
Connect Peripheral Equipment................... 28
HighDefinition ............................................. 28
Via The Scart .............................................. 28
Via Aerial Input ............................................ 28
Decoder ...................................................... 28
Connect a decoder with an aerial socket
to the TV ............................................... 28
Connect a decoder without an aerial
socket to the TV.................................... 28
TV And Video Recorder .............................. 28
PlaybackNTSC............................................ 29
Copy Facility ................................................ 29
CameraAnd Camcorder .............................. 29
To Connect To AV Input ......................... 29
To Connect To S-VHS Input ................... 29
Connect The Decoder To The Video
Recorder ..................................................... 29
Connecting Headphones (optional) ............. 29
Connecting Subwoofer ............................... 29
Audio Lineout .............................................. 29
Tips .................................................................. 29
Care Of The Screen .................................... 29
PoorPicture................................................. 29
NoPicture.................................................... 29
Sound.......................................................... 29
RemoteControl ............................................ 29
Appendix A: PC Input Typical Display
Modes.............................................................. 30
Appendix B: Aerial Connection ................... 30
Appendix C: Connect Peripheral
Equipment....................................................... 30
Appendix D: AV and HDMI Signal
Compatibility .................................................. 31
Specifications................................................. 32
S-input connector pin specifications ........... 33
HDMI connector pin specifications .............. 33
SCART connector pin specifications........... 33
SignalInput.................................................. 33
PC RGB Terminal (D-sub 15-pin connector) 33
UK Guarantee.................................................. 34

GB -3-
Safety Precautions
Please read the following recommended safety pre-
cautions carefully for your safety.
IMPORTANT SAFETY INFORMATION
ON OPERATING YOUR TV
Do’s and Don’ts DO’s
This Television has been designed and manu-
factured to meet international safety standards,
but like any electrical equipment, care must be
taken if you are to obtain the best results and
safety is to be assured.
DO read the operating instructions before you
attempt to use the equipment.
DO consult your dealer if you are in any doubt
about installation, operation or safety of your
equipment.
DO be careful with glass panels or doors on
equipment.
ThisTV issuppliedwitha fittedmainsplug. This
plug must notbe cut offas it maycontain a spe-
cial radio interference filter, the removal
of which could lead to impaired performance. If
you wish to extend the lead, obtain an appropri-
ate safety approved extension lead or consult
your dealer.
Observe the manufacturers instructions when
connectingextensionleadstotheTV. Checkthe
fuse rating on the newplug, this shouldbe fitted
witha5AmpfusewhichconformstoeitherASTA
or BSI (BS1 362) approvals, these are easily
identifiableby eitherthe or symbols. If
you are in any doubt about the installation of an
extension lead, please consult a competent
electrician. DON’Ts
DON’T continueto operate theequipmentif you
are in anydoubtabout it working normally, or ifit
is damaged in any way switch off, withdraw the
mains plug and consult your dealer.
DON’T place water filled vessels on top of T.V.
cabinets.
DON’T remove any fixed cover as this may ex-
pose dangerous voltages.
DON’T leave equipment switched on when it is
unattended unless it is specifically stated that it
is designed for unattended operation or has a
stand-by mode. Switch off using the switch on
the equipment and make sure your family know
howtodo this. Specialarrangementsmayneed
to be made for infirm or handicapped people.
DON’Tuseequipmentsuchaspersonalstereos
or radios so that you are distracted from the re-
quirements of traffic safety. It is illegal to watch
television whilst driving.
DON’Tobstructtheventilationoftheequipment,
for example with curtains or soft furnishings.
Overheating will cause damageandshorten the
life of the equipment.
DON’T usemakeshift standsandNEVERfixlegs
or stands to the TV with any screws other than
those provided - to ensure complete safety al-
ways use the manufacturers approved stand
with the fixings provided.
DON’Tallowelectricalequipmenttobeexposed
to rain or moisture.
ABOVE ALL
• NEVER let anyone, especially children push
anything into holes, slots or any other open-
ing in the case - this could result in a fatal
electric shock.
• NEVER guess or take chances with electrical
equipment of any kind - it is better to be safe
than sorry!
1. Power Source
The set should beoperated only from a 220-240VAC,
50 Hz. outlet. Ensure you select the correct voltage
setting for your convenience.
2. Power Cord
Do not place the set, a piece of furniture,etc. on the
power cord(mains lead) or pinch the cord.Handle the
power cord by the plug.Do not pull out the plug by
Be sure to ground the connection properly.
Connect the ground terminal of TVwith the ground terminal provided at the power
outlet using the enclosed power cord. If theprovided plug does not fit your outlet,
consult an electrician for replacement of the obsolete outlet.
Surely connect
the ground wire.

GB -4-
tugging the cord and never touch the power cord
when your hands are wet as this could cause a short
circuit or electric shock.Never makea knot in the cord
or tie it with other cord.The power cord should be
placed in such a way that they are not likely to be
stepped on.
A damaged power cord can cause fire or give you an
electric shock. When it is damaged and need to be
changed, it should be done by qualified personel.
3. Moisture and Water
Donot usethis equipment ina humidand damp place
(avoid the bathroom, the sink in the kitchen, and near
the washing machine). Do not expose this equipment
to rain or water, as this may be dangerous and do not
place objects filled with liquids,such as flower vases
on top of the set. Avoid from dripping or splashing.
If any solid object or liquid falls into the cabinet, unplug
the set and have it checked by qualified personnel be-
fore operating it any further
4. Cleaning
Before cleaning, unplug the set from the wall outlet.
Do not use liquid or aerosol cleaners. Use soft and
dry cloth.
5. Ventilation
The slots and openings on the back cover are in-
tended for ventilation and to ensure reliable opera-
tion. To prevent overheating, these openings must not
be blocked or covered in anyway.
6. Heat and Flames
The set should not be placed near to naked flames
and sources of intense heat,such as an electric
heater. Ensure that no naked flame sources, such as
lighted candles, are placed on top of the set
7. Lightning
In case of storm and lightning or when going on
holiday, disconnect the power cord from the wall out-
let.
8. Replacement Part
When replacement parts are required, be sure the ser-
vice technician has used replacement parts which are
specified by the manufacturer or have the same speci-
fications as the original one. Unauthorised substitutions
may result in fire, electrical shock, or other hazards.
9. Servicing
Please refer all servicing to qualified personnel. Do
not remove the cover yourself as this may result in an
electric shock.
WARNING: When the device is not in use for a long
time, disconnect from power.
Instructions for waste disposal:
• Packaging and packaging aids are recyclable and
should principally be recycled. Packaging materi-
als, such as foil bag, must be kept away from chil-
dren.
• Battery, including those which is heavy metal-free,
should not be disposed of with household waste.
Please dispose of used battery in an environmen-
tally sound manner. Find out about the legal regu-
lations which apply in your area.
• Cold cathode fluoresant lamp in LCD PANEL con-
tains a small amount of mercury, please follow lo-
cal ordinates or regulations for disposal.
• The mains plug is used to disconnect the TV from
the mains and therefore it shall remain readily op-
erable.
Warning: To prevent injury, this device must be se-
curely attached to the floor/wall in accordance with
the installation instrutions.
“The LCD panel is very high technology product with
about a million thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed point of blue,
green or red. Please note that this does not affect the
performance of your product.”
“DONOTLEAVEYOURTVATSTAND-BYOROPER-
ATINGWHENYOULEAVEYOURHOUSE”
Information for users applicable in European
Union countries
This symbol on the product or on its packaging
means that your electrical and electronic
equipment should be disposed at the end of life
separately from your household wastes. There are
separatecollectionsystemsforrecyclinginEU.For
moreinformation,pleasecontact thelocalauthority
orthedealerwhereyoupurchasedtheproduct.

GB -5-
Features
• Remote controlled colour LCDTV.
• Fully integrated Digital TV (DVB-T)
• 100 programmes from VHF, UHF bands or cable
channels can be preset.
• It can tune cable channels.
•Controlling the TV is very easy by its menu driven system.
• It has 2 Scart sockets for external devices (such as
video, video games, audio set, etc.)
• Stereo sound system (German+Nicam).
• Full function Teletext (500 pages).
Fastext, TOP text.
• Headphone connection.
•A.P.S. (Automatic Programming System).
•All programmes can be named.
• Forward or backward automatic tuning.
•Sleeptimer.
• Child Lock.
• Automatic sound mute when no transmission.
•NTSCPlayback.
• AV in and S-VHS in are available.
• It has VGA connector for external devices such as
computer.
•IthasanHDMIconnectorforDigitalVideo andAudio.
This connection is also designed to accept High
Definition signals.
•AVL (Automatic Volume Limiting)
• When novalidsignal is detected, after 5 minutes the
TV switches itself automatically to stand-by mode.
• PLL (Frequency Search)
•PCInput
• Plug&Play for Windows 9X, ME, 2000, XP
•Audio Line Out
Accessories
Check the supplied accessories before installation. In
case of missing or damaged items please contact
yourdealerimmediatley.
EUPlug
12 3
456
89 7
0
III
GUIDE
WIDE
SOUND PICTURE FEATURE INSTALL
PC
ABC DEF GHI
STU VWX YZ
EXIT
PQR
JKL MNO
TV
A
V
DTV
-/-- P<P
RC 1072
RemoteController
RC1072
Batteries
2 X AAA
Instruction Book
Quick Guide

GB -6-
Rear View and Peripheral Connections
S-VHS Input (S-Video)
Video Input (FAV)
Audio Inputss
Headphone
Audio Line Outss
Subwoofer
TV/AVV
MENU
IR Receiver Standby LED
Fixed Tale Top Stand.
Built in Speakers
220V-240V
AC~50 Hz
POWER
Note: Because FAV CVBS and SVHS Y are connected parallelly, the picture may blend if the two peripherals
are used at the same time. Likewise, because SVHS C and SCART II R are connected parallelly, the picture
may blend if the two peripherals are used at the same time. Thus these two are not to be used at the same
time.
-P/CH+
-VOLUME+
STAND-BY
PCVGAInput(PCRGB)
PCAudioInput
RF (Antenna) (TV/DTV)
Component Video Inputs (YPbPr)
ComponentAudio Inputss
SCART1(EXT-1)
SCART2 (EXT-2)
HDMI1
For Service Use Only
Power On/Off Switch
Power Cord Input
CISlot

GB -7-
Remote Control Buttons
= Stand By
YELLOW = Fast Text / DTV =Audio Language,
TV = Feature Menu
BLUE = Fast Text / DTV = Favorites,
TV = Install Menu
= Update / No function
= Hold
/ GUIDE =IndexPage
GUIDE=ElectronicProgrammeGuide(EPG)
/ PC = Reveal/ PC
0 - 9 = Direct Programme
- / - - / EXIT = No Function
V+ = Volume Up
P + =Programme Up
TV DTV
= TV / DigitalTVMode
AV
= External Source
PP = Personal preference
= Cursor Up
= Cursor Right
OK/SELECT = Store / Freeze
= Cursor Down
M = Menu
= Cursor Left
I-II =Mono/Stereo- DualI-II
/ INFO = Info
- P = Programme Down
= Mute
- V = Volume Down
P<P = Previous Programme
/WIDE / = Image size / Expand
/ = No function / Mix
= Teletext
= Time


RED= Fast Text / DTV= Channel List. TV = Sound Menu


GREEN= FastText / DTV =SubtitleON/OFF, TV = Picture Menu
123
456
89
7
0
III
GUIDE
WIDE
SOUND PICTURE FEATURE INSTALL
PC
A
BC DEF GHI
STU VWX YZ
EXIT
PQR
JKL MNO
TV
A
V
DTV
-/-- P<P
RC 1072

GB -10-
Preparation
For ventilation, leave a space of at least 10 cm free all
around the set. To prevent any fault and unsafe situa-
tions, please donotplace anyobjects ontopof theset.
Use this apparatus in moderate climates.
Before Switching On Your TV
Power Connection
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz.
•After unpacking, allow theTV set to reach the ambi-
ent room temperature before you connect the set to
themains.
Connections To The Aerial Input Socket
•Connect the aerial orcableTVplugto theAerial input
socket located at the rear of the TV and connect the
cable plug coming out from the TV out socket lo-
cated on the devices (VCR, DVB etc.) to this socket
as well.
VHF/UHF
75
REAR OF THE TV
CABLE TV
Inserting Batteries In The Remote
ControlHandset
WARNING: Remotecontrolisbatteryincluded.Aplas-
tic protector is used to disconnect the batteries in
order to prevent the batterylife from reducing. Please
remove the plastic protector before the first use.
• Remove thebattery coverlocatedon theback of the
handset by gently pulling backwards from the indi-
cated part.
• Insert two AAA/R03 or equivalent type batteries
inside. Place the batteries in the right directions and
replace the battery cover.
Note: Remove the battery from remote control hand-
set when it is not to be used for a long period. Other-
wise it can be damaged due to anyleakage of battery.
Handling the Remote Control
• It could cause corrosion or batteryleakage and may
result in physical injury and/or property damage in-
cluding fire.
• Never mix used and new batteries in the device.
•Replaceallthebatteriesinadeviceatthesametime.
• Remove the batteries if the remote control is not
going to be used for an extended period of time.
• To avoid possible failure, read the following instruc-
tions and handle the remote control properly.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquidon theremote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under the direct
sunlight or near sources of excessive heat.
Note: Remove the battery from remote control hand-
set when it is not to be used for a long period.
Otherwise it canbe damaged dueto any leak-
age of battery.
Operating Range for the Remote Control
• Point the top of the remote control toward the LCD
TV's remote sensor LED while pressing a button.
30 30
123
456
89 7
0
III
GUIDEWIDE
SOUND P ICTURE FEATURE INSTALL
PC
ABC DE F G HI
STU VWX YZ
EXIT
PQR
JK L MNO
TV
A
V
DT V
-/-- P<P
RC 1072
Remote range is approximately 7m/23ft.

GB -11-
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power supply cord to the system.
Press Power On/Off button.Then the TV switches
itself to stand-by mode (Optional).
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected, or Press the "-P/CH"
or "P/CH+" button on the TV or press the “P-” or
“P+” button on the remote control, so that last mode
switched off is selected.
By either method the TV will switch on.
To switch the TV off:
• Press the “ (stand-by)” button on the remote con-
trol or On/Off switch on theTV, so the TV will switch
to stand-by mode.
To power down the TV completely, press Power On/
Off button or unplug the power cord from the mains
socket.
Navigating the Menu System
I
I
I
TV
A
V
DTV
For displaying
menu options
For navigation
To confirm choices
1- Press M to display the menu.
2- Press “
b
” or “
a
” button to select an icon. Press
“
`
” for more options.
3- Use “
b
” or “
a
” button to highlight.
4- Press “
_
” or “
`
” buttons to change the settings.
Press OK to set as default.
5- To exit the menu or return from sub-menu screen,
press M.
These explanations are available for the navigation
of the whole Menu System. To select options that are
explained in the following parts, refer to “Navigating
The Menu System”.
InitialSettings
When the TV is turned on for the first time, IDTV is on
first. Because this is the first time that IDTV has been
used, there are no channels stored in the memory.
When the TV is turned on for the first time, the menu
for the language selection appears on the screen.
The message “Welcome please select your lan-
guage!” is written in all language options sequen-
tially in the menu on the screen.
By pressing or buttons highlight the language
you want to set and press “SELECT” button. In the
menu “Set Language” is written next to “OK” item to
indicate that “Press SELECT button to set the high-
lighted language option.”
You can get information about the menu usage by
pressing “ ” button.And press “ ” button again
to exit the help menu.
After “then, First time InstallationMenu willappear on
screen.By pressing or buttons, selected coun-
try item you want to set and press “SELECT” button
First time installation
Choose Country
Set country and continue installation
OK
Czech
After the First time Installation is set, the following
message appears on the screen.
Do you want to start automatic search?
Yes No
• To start automatic search, select “Yes”, to cancel
select “No”.
•To selectanoption“YesorNo”, highlight theitem by
using or buttonsandpress“SELECT”button.
The IDTV will automatically tune to the transmission
channels according to selected country standards
looking for digital terrestrial TV broadcasts and dis-
playing the names of channels found. This process
will take about five minutes. To cancel searching,
you can press “M” button at any time during the
process.
MENU
Codec 4:3
Codec 16:9
Searching UHF channels 62. Please wait. This will take a few minutes
Cancel searching
Automatic Search

GB -12-
of the signal received on this tuning channel.
• The current and next programme information are
given with the start and finish time.
• The current time information is displayed along with
channel name.
Hint
Notall channels broadcast the programme data.If the
name and times of the programme are not available
then “No InformationAvailable” is displayed in the in-
formation banner.
If the selected channel is locked, you must enter the
correct four digit key to view the channel.
Enter Lock Key
ELECTRONICPROGRAMMEGUIDE(EPG)
Some, but not all, channels send information about
the current and next events. Please note that event
informationisupdatedautomatically.Ifthereisnoevent
information data available for channels, only channel
name with “No Information Available” banner is
displayed.
• Press “GUIDE” button to view the EPG menu.
• Press or buttons to navigate in Channels or
Programmes.
• Press or buttons to navigate through the
channel and programme list.
• In EPG Menu, you caneasily see the extended help
information by pressing the “ ” button and by
pressing this button again you can close this win-
dow.
News 10:00-11.00
1. ONE Commonwealth … Nachrighten
2. BBC TWO Driven Crazy Clifford The Big Red Dog
5. five The Chart Dawson’s Creek
Navigate Schedule Watch More
Electronic Programme Guide Wed 31/7 09:13
1 ONE
OK
5. FIVE The Chart Dawson’s Creek
• In the EPG Menu all channels are displayed. The
current channel is highlighted when you enter the
EPGmenu.
• Use or buttons to change the channel. Also
press or buttons to make pageup/down scroll
for the channels. And press “SELECT” button to
watch the highlighted channel.
After Automatic Search process is completed, the
followingmessageaskingforanaloguechannelsearch
appears on the screen. TV switches to the analogue
TVmode:
Country
Language
Auto Program
En
g
lish
Ok
Cancel
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
TXT Language
By pressing “ ” or “ ” button, adjust the Country
item and press “ ” to highlight “Language” item.
Use “ ” or “ ” button to set “Language”. Use “ ”
or “ ” buttons to select “TXT Language” and set it
by using “ ” or “ ” buttons. Press “OK” button to
continue:
For more information on this process, see “Install
Menu” section.
Everyday Operation
Pressingthe“ /DTV”buttonatanytimewhilewatch-
ing television programmes will switch the TV set be-
tween the digital terrestrial television broadcasting
and the analogue broadcasting.
Information Banner
• Whenever you change the channel using the “P/CH
+” or “-P/CH” buttons or the number buttons, TV
displays the channel picture along with an informa-
tion banner at the bottom of the screen. This will re-
main on the screen for approximately three seconds.
• The information banner can also be displayed by
pressing the “ ” button at any time while watch-
ingtheTV.Pressing the“ ”buttonagainremoves
the banner.
4 RTL 09:10
CH 48
Now: NEWS
Next: NEWS
Signal : 04:35-11:00
11:00-17:55
The information banner gives a number of facts on
the channel selected and the programme on it:
• The name of the channel is displayed along with its
channellistnumberandanindicationofthestrength

GB -13-
• If you highlight an event, short event description,
extended event description, start and finish time of
the event are displayed on the screen.
• If you press “SELECT” button when a next event is
highlighted, a reminder is set for the highlighted
programme anda clock icon appearsacrossthe high-
lighted channel line as shown in the following EPG
menu figure.
Programme reminders is set to signal that a
programme is about to start when you are watching
another channel. If youset reminderto a programme,
then you will be asked for switching to that channel
when the reminder time is reached.
News 10:00-11.00
1. ONE Commonwealth … Nachrighten
2. BBC TWO Driven Crazy Clifford The Big Red Dog
5. five The Chart Dawson’s Creek
Navigate Schedule Reminder More
Electronic Programme Guide Wed 31/7 09:13
1 RTL
OK
5. FIVE The Chart Dawson’s Creek


• By pressing the “BLUE” button you can view the
extended schedule of the programmes.
• By pressing the “INFO”button you can see the
detailed help information easily. And by pressing
“INFO”button again you canexit Help menu.
By pressing the “BLUE” button, the following EPG
Menu appears on the screen.
1. BBC ONE
2. BBC TWO
5. Five
7. BBC Choice
11.DISCOVERY
15.BBC NEWS 24
17.BBCi

More
Advance Day
Electronic Programme Guide Wed 21/4 10:12
No Information Available
BBC ONE TUE 21/4, 20:00-22:00
Navigate Change Time
• By pressing “YELLOW/BLUE” button, you can ad-
vance the schedule backward / forward of a day.
•Bypressing“GREEN/ RED”buttonsyoucanchange
the schedule time.
• If you press “INFO” button you can see the detailed
helpinformationeasily.Andbypressing“INFO”button
again you can exit Help menu.
Displaying The Subtitles
With Digital terrestrial broadcasting (DVB-T), some
programmes are broadcast with subtitles. Subtitles
can be displayed when watching these programmes.
• Whenever GREEN button is pressed, Subtitleselec-
tion OSD will be displayed onthe screen. Youcanset
Subtitles as ON or OFF. For Subtitle Language op-
tions, refer to “Language Settings” in the “Configura-
tion Menu” section.
TELETEXT
Use of teletext and and its functions are identical to
theanaloguetext system.Pleasedo referto the“Ana-
logue teletext” explanations.
DTV Menu System
The IDTV Menu can only be shown when watching
Digital terrestrial broadcasting. Press the “TV/DTV”
button to turn the IDTVon while TV isin the analogue
mode.
1. Press MENU button.
The menu below appears on the screen:
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
Channel List
Using or buttonsontheremotecontrolin Main
menu, make sure that the first item, Channel List, is
highlighted and press the “SELECT” button to display
the Channel List.
The following operations can be performed in this
menu:
1. Navigating the whole list of channels
2. Moving channels*
3. Deleting channels
4. Renaming channels
5. Adding locks to channels
6. Setting favourites
*Depending on your selection of Country in the
first time installation, “MOVE” option of the
Channel List may not be visible.
Channel List is the place where the channels are
managed.

GB -14-
SELECT
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Select
Function Select Channel Watch More
1 BBC ONE
OK
i
Delete Edit Name Lock FavouritesMove
Navigatingthewholechannellist
• Press or keys for selecting the previous or
next channel.
• You can press or buttons to move page up or
page down.
• To watch a specific channel, highlight it using or
buttons and then press “SELECT” button, while
the“Select” itemonChannelListmenuis highlighted
via using or buttons.
Movingthechannelsinthechannellist
• Press or buttons to select the channel that
will be moved.
• Press or buttons to select the ‘’Move’’ item on
ChannelListmenu.
“Move” is written next to “OK” item to indicate that
press “SELECT” to move the highlighted channel to
the desired position on the channel list.
SELECT
i
OK
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Function Select Channel Move More
1 BBC ONE
Select Delete Edit Name Lock FavouritesMove
• Press “SELECT” button, the selected channel be-
comeshighlighted.
• Use or buttons to select the new position of
the channel and press “SELECT” button to place the
channel to the selected position andreturn themenu.
Deletingthechannelsinthe channellist
• Press or buttons to select the channel that
will be deleted.
•Press or buttonsto selectthe‘’Delete’’item on
ChannelListmenu.
As seen on Channel List menu, “Delete” is written
next to “OK” item at the bottom of the screen to
indicatethatpress“SELECT”buttontodeletethehigh-
lighted channel in the channel list.
SELECT
i
OK
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Function Select Channel Delete More
1 BBC ONE
Select Delete Edit Name Lock FavouritesMove
Press“SELECT’’buttontodeletethehighlightedchan-
nel in the channel list. Then the message below ap-
pears on the screen.
The selected service will be permanently deleted, and
favourite list will be turned off. Are you sure?
Yes No
• Press or buttons to highlight the desired op-
tion.
• If “SELECT’’ button is pressed while “Yes” is high-
lighted, the highlighted channel is deleted.
• Selecting “No” cancels the delete operation.
Renamingchannels
To rename a specific channel, the channel must be
highlighted via pressing or buttons and then
highlight the “Edit Name” item by pressing or
buttons. Press “SELECT” button to activate rename
feature.
SELECT
i
OK
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Function Select Channel Edit Name More
1 BBC ONE
Select Delete Lock FavouritesEdit NameMove
Now pressing or buttons moves to the previ-
ous/next character. Pressing or buttons

GB -15-
toggles the current character, i.e., ‘b’ character be-
comes ‘a’ on and ‘c’ on . Pressing the numeric
buttons ‘0...9’ replaces the highlighted character with
the characters printed above the key one by one as
the button is pressed.
Pressthe“M”buttontocanceltheeditingor“SELECT”
button to save the new name.
Addinglockstochannels
Channel Locking provides a password-protected ac-
cess to channels selected by parents.
In order tolock a channel you should know theParen-
tal Lock password (default value is set to 0000 in the
factory and can only be changed from the Configu-
ration Menu).
By pressing or buttons, highlight the channel
to be locked and select the “Lock” option by press-
ing or buttons.Then press the“SELECT” but-
ton, a password box is displayed.
SELECT
i
OK
CHANNEL LIST
1. BBCONE
2. BBCTWO
3. ITV 8
4. Channel 4
5. BBCTHREE
6. Teletext
7. BBCFOUR
8. Sky Travel
9. UKHistory
10. RTL
Function Select Channel Lock/Unlock More
1 BBC ONE
Select Delete FavouritesEdit Name LockMove
Enter Lock Key
SettingFavourites
You can set various channels as favourites so that
only the favourite channels are navigated. To set a
favourite you should highlight the “Favourites” item
at bottom of the Channel List menu.
To set a favourite you should highlight the
“Favourites”item atbottom oftheChannel Listmenu,
and then pressing ‘’SELECT’’ key, Edit Favourite
Lists menu appears on the screen.
You can list your favourite channels using List 1, List
2, List 3, List 4 or List 5.
Using 5 lists enables listing channels for diffrerent
categories (sport, music etc.). And by activating the
favourites list number that you want in Favourite
Mode submenu of Configuration menu, you enable
only the channels in the selected list. Configuration
menu is enteredfrom the Main Menu.
SELECT
i
OK
CHANNELLIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
Select List Select Channel Add/Remove More
List 1 List 2 List 3 List 4 List 5
How To Add A Channel To A Favourite List:
•Bypressing“” / “ ” buttons,highlightthechan-
nel that you want to add to the favourite list.
• Select the list number by pressing “ ” / “ ” but-
tons.
•Bypressing“SELECT’’button, thehighlightedchan-
nel is added to selected list number.
For each channel, an icon indicates which favourite
list a channel is in. (i.e. In figure above, icon indi-
cates that BBC ONE is added to List 1.)
To remove any channel that is added to a
favourite list:
• Highlight the channel that you want to remove from
the favourite list you have added;
• Highlight the list number that the channel will be
removed, and press “SELECT’’ button. The icon indi-
cating theaddedlistnumberdisappears onthemenu.
Note: A channel can be added to more than one
favourite list.
To activate Favourites, go to the Configuration menu
and select the list number in Favourite Mode you
want to activate by pressing or buttons. ToTo
cancel Favourites, set Favourite Mode to Off.
Using “BLUE” button to navigate through the
favourite channels:
You can navigate through the favourite channel lists
via pressing “BLUE” button. For each pressing of
“BLUE” button,youcannavigatethroughthefavourite
channels that are top of the each channel list, se-
quentially.
While a channel list is selected, you can navigate
through the favourite channels in that list by pressing
“P/CH+” or “P/CH-” buttons.
OnScreen HelpPressingINFOButton
For all menus press “INFO” button to display the help
information about the menu functions. For Channel
List menu the following message is displayed on the
screen.

GB -16-
Press the SELECT button on your remote control to tune to the
highlighted channel.
Press MENU to exit this screen.
Hint:
Entering More item pressing “INFO” button gets
quick and easy use of the all menus in IDTV
displaying information for the highligted menu
item.
Installation
The Installation menu mainly intends to help you for
building a Channel Table in most efficient way.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
This menu includes the following items:
1. Automatic Search
2. Manual Search
3.FirstTimeInstallation
Installation
Automatic Search
Manual Search
First Time Installation
Automatic Search:
Automatic search is started by pressing “SELECT”
button while Automatic Search item is highlighted.
The following message appears on the screen.
Please check antenna connection. Do you want to start
automatic search? Your previous channel list will be....
Yes No
Highlight “Yes” or “No” via using or buttons and
press “SELECT” button to select.
If “Yes” is selected, Automatic Search is started.
Selecting “No” cancels Automatic Search.
After searchis completed for digital channels, a mes-
sage asking search for analogue channels appears
on the screen.
Yes
Do you want to search for
analogue channels?
No
Highlight “Yes” and press “SELECT” button to searh
for analogue channels.The following menu appears
on the screen for analogue channel search.
Country
Language
Auto Program
En
g
lish
Ok
Cancel
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
TXT Language
By pressing “ ” or “ ” button, adjust the Country
item and press “ ” to highlight “Language” item.
Use “ ” or “ ” button to set “Language”. Use “ ”
or “ ” buttons to select “TXT Language” and set it
by using “ ” or “ ” buttons. Press “OK” button to
continue:
UK
P 03 - C 04
63.75 MHz
6%
63.75 MHz
Cancel
APS is running...
After APS is finalized, the programme table will ap-
pear on the screen. In the programme table you will
see the programme numbers and names assigned to
theprogrammes.
If you do not accept the locations and / or the
programme names, you canchangethem in aps sub-
menu in the settings menu.

GB -17-
All the services are searched and a channel table is
created automatically.
All channels found are stored in a sorted form with
respect to their channel numbers. Some services
may not appear with the correct channel number. At
the time of printing, not all broadcasters are sending
their channel number information.
Manual Search:
In Manual Search, the number of the multiplex is
entered manually and only that multiplex is searched
for the channels. For every valid channel number,
signal level, signal quality and network name are
shown at the bottom of the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
First Time Installation
The user can use this item to load default settings,
which had been loaded to the receiver at the factory.
To install factory settings, highlight “First Time In-
stallation” menu item and press “SELECT” button,
then you will be asked to tings. Selecting “Yes” by
pressing “SELECT” button while the “Yes” is high-
lighted and then the existing channel table will be de-
leted.
Are you sure you want to delete all channels and
settings for first time installation?
Yes No
After factory settings is loaded, “First Time Instal-
lation” menu will be displayed.
The menu which is displayed for language selection
appears on the screen at first. By using or
buttons,selectthedesiredlanguageoption,andpress
“SELECT” button toactivate.
After the language is selected, a message asking for
automatic search start appears on the screen.
Do you want to start automatic search?
Yes
No
Highlight “Yes” item by pressing or buttons and
press“SELECT”buttontostartinstallation.Aftersearch
is completed for digital channels, a message asking
search for analogue channels appears on the screen.
Yes
Do you want to search for
analogue channels?
No
Highlight “Yes” item bypressing or buttons and
press “SELECT” button to searh for analogue
channels.The following menu appears on the screen
for analogue channel search.
Country
Language
Auto Program
En
g
lish
Ok
Cancel
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
TXT Language
By pressing “ ” or “ ” button, adjust the Country
item and press “ ” to highlight “Language” item.
Use “ ” or “ ” button to set “Language”. Use “ ”
or “ ” buttons to select “TXT Language” and set it
by using “ ” or “ ” buttons. Press “OK” button to
continue.
Configuration
Press “M”button todisplay the MainMenuandthe
buttontwicetohighlightConfiguration,thenpress“OK”
button to display the Configuration menu. Press “M”
button to exit the menu.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
The various configuration functions are displayed in
a list, along with a quarter-screen image of the cur-
rently selected channel. You can select a function by
highlightingthecorrespondingmenulineusingthe
or buttons.

GB -18-
Configuration
Favourite Mode
Channel List
Language Settings
Time Settings
Receiver Upgrade
i
Change Favourite Mode More
Tv Only
V.0.7 (EU)
Off
Parental Settings

Select Mode
4
A
rte
Country : Germany

Exit
Favourite Mode
This function enables or disables the favourite chan-
nellist mode.
Use or buttons to setFavourite Mode to “List 1,
List 2,..., List 5 or Off”.
Selecting “Off” disables the favourite channel List
mode.
If the “Favourite Mode” is set on via selecting a
channel list number, in normaloperating mode press-
ing “P/CH+” and “P/CH-” buttons will only navigate
through the channels that were previously defined
as favourites in the selected channel list.
Channel List
IntheConfigurationMenu,highlighttheChannelList item
by pressing or buttons.
Use the or buttons to set the Channel List to
“TV only or Radio only”.
This feature enables navigation only through the se-
lected channel list type.
If “Radio only” is set, you can only navigate through
the Radio channels in the channel list via using “P/
CH+” or “P/CH-”- buttons.
Language Settings
IntheconfigurationMenu,highlighttheLanguageSet-
tings item by pressing or buttons. Press OK
andLanguageSettings submenu willbedisplayedon
the screen:
Audio Language
Subtitle Language
System Language
EnglishEnglish
English
Off
Use or buttons to highlight the menu item that
will be adjusted.
System Language
System Language determines the on-screen menu
language.
Use or buttons to set the System Language
setting.
Audio Language
Digital terrestrial television channels can broadcast
simultaneous sountracks in more than one language.
This function selects which language soundtrack you
will hear when switching to a channel broadcasting
with the multiple soundtracks.
Use or buttons to cycle through the language
options.
- Whenever YELLOW button is pressed, Audio Lan-
guage selection OSD will be displayed on the screen.
Subtitle Language
Digital terrestrial television channels can broadcast
with subtitles displayed on-screen for the hard-of-
hearing. This function selects the desiredsubtitle lan-
guage and enables the automatic display of subtitles
whenever subtitle information is broadcast.
Use or buttons to cycle through “Off” and
language options.
Parental Settings
Some channels broadcast material which you do not
want younger members of the family to watch. Any
channel can be ‘locked’ so that it cannot be selected
for viewing without first a four-digit PIN code being
entered. In this way any channel not suitable for
younger viewers can be protected.
This function enables ordisables themenuprotection
systemandallowsthe PINcodetobechanged.Chan-
nelAnd Menu Protection Lock feature.
Use or buttons to highlight Parental Settings.
Press“SELECT”buttontoenterParentalSettingsMenu.
A box asking for the lock key is displayed.
Enter Lock Key
There is only one key which is set to “0000” initially.
Enter lock key. If wrong Lock key is entered, the fol-
lowing message is displayed on the screen and it is
returned back.
Wrong Lock Key
If it is correct, the Parental Settings Menu including
following items is displayed:
Menu Lock Installation
Set Lock Key
Maturity Lock
A
ge 5

GB -19-
Use or buttons to highlight the menu item that
will be adjusted.
Maturity Lock:
Use or buttons to set Maturity Lock to the “Off,
Age 4, Age 5...........Age17 or Age 18”. (“Off, Age 4,
Age 5,..., Age 18, above 6 years, Universal viewing
(FRA) or X-rated ESP”.)
Menu Lock:
There you can set/reset locking for the Main Menu or
the Installation Menu to restrict access. If the menu
lock is disabled, there will be free access to the menu
system.
Off: All menus are unlocked.
Main Menu: Main menu is accessible only with the
correct lock key. So the user cannot add, delete, re-
name, move channels, cannot set timers.
Installation: Installation menu is locked, so the user
cannot add channels.
Changes will be updated after exiting Configuration
Menu.
Set Lock Key:
Also in this menu you can change the lock key and
set/change parental lock mode.
Time Settings
In the configuration Menu, highlight the Time Settings
item by pressing or buttons. Press OK and
TimeSettingssubmenuwillbedisplayedonthescreen:
Time Zone Setting
Time Zone
Current Time
14:26
Auto
GMT +0
Use or buttons to highlight the Time Zone
Setting. Time Zone Setting is set using or but-
tons.Itcanbeset toAUTOorMANUAL. WhenAUTO
is selected, Current Time and Time Zone options will
not be available to be set.
If MANUAL option is selected as the Time Zone Set-
ting, Time Zone could be altered:
•By pressing or buttons select Time Zone.
Use or buttons to change the Time Zone be-
tweenGMT-12orGMT+12.CurrentTimeonthetopof
the menu list will then change according to the se-
lectedTimeZone.
Receiver Upgrade
TheIDTVcanbeupgradedviatheconfigurationmenu,
entered from the main menu.
Configuration
Favourite Mode
Channel List
Language Settings
Time Settings
Receiver Upgrade
i
More
Tv Only
V.0.7 (EU)
Off
Parental Settings
OK Search for Upgrade
4
A
rte
MENU Exit
Country : Germany
In the configuration menu, highlight the “Receiver
Upgrade” item by pressing or buttons and
press “OK” button to start upgrade process. The
following menu appears on the screen.
Software Upgrade
Searching for upgrade. Please wait, or press
MENU to cancel.
Search Progress:
After the search progress is completed, the message “
Completed searching for upgrade. No new soft-
ware was found” appears on the screen if no new
software is found.
Timers
Display the Main Menu by pressing the “M” button.
Highlight the Timers line by pressing or but-
tons and press “SELECT” button to display the Timer
menu.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
Up to five separate timer events can be set and each
is displayed in the Programme Timers screen, show-
ing the event number, the channel to be selected, the
start time, end time, date and the mode- whether that
event is active (and will be acted on) or not.

GB -20-
i
MENU
Programme Timers
No Channel Name Start End Date Mode
1. ITV 1 20:00 21:00 12/05/2005 Active
2. BBC ONE 00:00 00:00 01/01/2005 Inactive
3. BBC ONE 00:00 00:00 01/01/2005 Inactive
4. BBC ONE 00:00 00:00 01/01/2005 Inactive
5. BBC ONE 00:00 00:00 01/01/2005 Inactive
6. BBC ONE 00:00 00:00 01/01/2005 Inactive
Move/Change
Exit Edit Timer More
OK
10:42
04/07/2005
•To set anevent, highlight its modebutton using or
buttons and press “SELECT” button to display the
timer entry window.
Type:
Name:
Start:
End:
Date:
Mode:
TV
3. ITV
00:00
00:00
03/06/2005
Once
• Here the sixsettings of channel type, channelname,
start time, end time,date and frequency modecan be
set. You can move freely between each setting using
or buttons.
• The channel type is set using or buttons. It
enables displaying only the selected type channels.
• The channel name is set using or buttons to
displaythe channelwhichbroadcaststheprogramme.
• The start time, end time and date are each set with
the number buttons on the remote control in 24-hour
format.
• The frequency mode determines how often the re-
ceiver operates this event and is set with the or
buttons to be either Once, Daily, or Weekly.
Hint
If an invalid number for the start or end times
or the date is entered, “Entered time is not
valid” message appears on the menu.
TV Setup
To be able to go through TV functions, you can use
thisitem.
The digital TV Setup menu screen is accessed from
the Main Menu. Press the “M” button to display the
MainMenuanduse or buttonstohighlight“TV
Setup”. Press “SELECT” button to display TV Setup
menu screen.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
Detailed information for all menu items is inAnalogue
TV Menu System section.
Common Interface
• Press “M” button to display the Main Menu and use
the or buttons to highlight the “Common
Interface” line and press “SELECT” button.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
It is required to subscribe to a pay channel company
toviewthepaychannelsoftheDigitalTerrestrialbroad-
casting. Obtain theConditionalAccess Module(CAM)
and the Viewing card by subscribing to a pay chan-
nel company, then insert those to theTelevision using
the following procedure.
1. Switch off the TV and unplug from the mains.
2. Insert the CAM, then Viewing Card to the
slot that is located in the terminal cover at the
left-hand side of the TV (from front view).
• The CAM should be correctly inserted, it is impos-
sible to insert fully if reversed. The CAM or the TV
terminal may be damaged if the CAM is forcefully
inserted.
3. Connect the TV to the mains supply, switch
on and then wait for few moments until the
card is activated.
•SomeCAMs mayrequirethefollowingsetup.Please
set the CAM by entering the IDTV menu, Common
Interface then pressing “SELECT” button. (CAM set
up menu is not displayed when it is not required.)

GB -21-
Analogue TV Menu System
Picture Menu
PICTURE
Mode
Contrast
Bri
g
htness
Sharpness
Colour
In picture menu if PC,YPbPr or HDMI modes are
selected, resolution information is displayed at the
bottom of the menu osd.
Mode
By pressing
a
/
b
button, select Mode. Press
_
/
`
button to choose from one of these options: Cinema,
Dynamic and Natural.
Contrast/Brightness/Sharpness/Colour/Hue
By pressing
a
/
b
button, select the desired Option.
Press
_
/
`
button to set the level.
Hint: Hue is displayed in picture menu when the TV
receives an NTSC signal.
ColourTemp
• By pressing
a
/
b
button select Colour Temp.
• Press
_
/
`
to choose from one of these options:
Cool, Normal and Warm.
NoiseReduction
By pressing
a
/
b
button select Noise Reduction.
Press
_
/
`
to choose from one of these options:
Low, Medium, High or Off.
FilmMode
Films are recorded at a different number offrames
per second to normal television programmes.
By pressing
a
/
b
button, select Film Mode.
Press
_
/
`
button to set this feature On or Off. Turn
this feature on when you are watchingfilms to see
the fast motion scenes clearly.
Picture Zoom
By pressing
a
/
b
button select Picture Zoom.
Use
_
/
`
buttons, to change picture zoom to Auto,
16:9, 4:3, Panaromic, 14:9 Zoom, Cinema, Sub-
title, or Zoom.
Reset
By pressing
a
/
b
button, select Reset. Press
`
or
“OK” button to reset the picture modes to factory
default settings.
Store
• By pressing
a
/
b
button select Store.
• Press
`
or “OK” button to store the adjustments.
“Stored” will be displayed on the screen.
Sound Menu
SOUND
Volume
Equalizer
Balance
Headphone
Sound Mode
Volume
By pressing
a
/
b
select Volume . Press
_
/
`
button to change the level of the Volume.
Equalizer
By pressing
a
/
b
select Equalizer.Press
_
/
`
button to change the Equalizer setting. In equalizer
menu, the modecanbe changedto Pop, Rock, Jazz,
Flat, Classic or User. Select the desired frequency
by
a
/
b
button and increase or decrease the fre-
quency gain by pressing
_
/
`
button.
Note: Equalizer menu settings can be altered only
when the Equalizer Mode is in User.
Balance
Bypressing
a
/
b
select Balance.Press
_
/
`
button
to change the level of the balance.Balance level can
be adjusted between -32 and 32.
Headphone
By pressing
a
/
b
button, select Headphone. Press
`
button to enter hedphone menu.
volume
By pressing
a
/
b
button, select Volume. Press
`
button to increase hpvolume level. Press
_
button to