
5
1Gun holder )Nozzle lTighten
2Washer protrusion qProtrusion ;Hose end
314 to 15 mm wJet zInsert it past this point
420 mm or less eSpray xAccumulated water
5Gun support protrusion rLow-pressure cInsert directly
6Washer long hole tHigh-pressure vSwitch
7Press firmly yNozzle tip bTrigger
8Screw supplied uPressure adjuster nCenter of the trigger
9Hose handle iWater supply pipe mSwitch ON
0Attachment hole oDetergent bottle ,Trigger stopper
!Power plug pFilter on the tip of the water
feed pipe .Lock
@Water feed inlet aHose band /Release
#Water feed inlet cap sSuction hose ¡Hose reel
$Water feed connector dMoisten the inside with water ™Hose handle
%High-pressure hose fStrainer £Nozzle cleaner pin
^Trigger gun gSlotted screwdriver ¢Nozzle hole
&Connector hOne-touch joint ∞Loosen
*O-ring jInsert the suction hose §Turbo nozzle
(Ring kPass it through the ring first ¶Cleaning brush
Symbols
WARNING
The following show symbols used for the machine. Be sure that you
understand their meaning before use.
Read all safety
warnings and all
instructions.
Failure to follow
the warnings and
instructions may result
in electric shock, fire
and/or serious injury.
High-pressure water
can be dangerous if
used incorrectly. High-
pressure water jets
must not be directed
at people, electrical
equipment or the
washer itself.
Only for EU countries
Do not dispose of electric
tools together with
household waste material!
In observance of European
Directive 2002/96/EC
on waste electrical and
electronic equipment
and its implementation in
accordance with national
law, electric tools that
have reached the end of
their life must be collected
separately and returned
to an environmentally
compatible recycling facility.
Water that has passed
through the backflow
valve cannot be used
for drinking.
Alternating current
Class II tool
Warning
VVolts
AAmperes
Hz Hertz
WWatts
kg Kilograms
MPa Megapascals
000BookAW150Eng.indb5000BookAW150Eng.indb5 2013/05/1410:06:502013/05/1410:06:50