Hitachi CP-WU13K User manual

CP-WU13K DLP®Projector
High performance, 3G SDI ready
projector with dynamic feature set
and broadcast capability delivers an
entirely new viewing experience.
Key Features
■WUXGA 1920 x 1200 resolution
■13,000 ANSI lumens light output
■Dual lamp system
■3 chip DLP technology
■HDMI 2 inputs
■3G SDI enabled
■3D availability with stereo DVI
■Edge blending
■Geometric correction
■High performance lter
1.800.HITACHI
[email protected]
hitachi-america.us/projectors
CP-WU13K
As part of Hitachi’s Professional Series, the CP-WU13K DLP®projector is a
true achievement in graphics display technology and performance. Offering
the most advanced functionality with flexible installation features, Hitachi’s
CP-WU13K is a perfect choice for large auditoriums, conference rooms,
museums, and concert or stage productions. The CP-WU13K is equipped
with a dual lamp system, which achieves brightness of 13,000 lumens,
provides multi-projection capability, incorporates 4 digital inputs including
3G SDI for added versatility and broadcast capability, plus a high performance
filter reducing dust sticking to critical components. For even greater image
quality, the CP-WU13K features 3 chip DLP technology. Each chip is actually
divided by a light prism into each of the three primary color chips instead of
the light being directed into one unique chip. The light is then redirected and
combined through the projector lens as the image. For added peace of mind,
Hitachi’s CP-WU13K is also backed by a generous 3-year warranty and our
world-class service and support programs.

CP-WU13K DLP®Projector
Hitachi America, Ltd.
Toll Free: 1.800.HITACHI •Email: [email protected]
Web: hitachi-america.us/projectors
HI0272-Rev.1-04/14
All specifications subject to change without notice.
DLP
®
and the DLP logo are registered trademarks of Texas Instruments.
©2014 Hitachi America, Ltd. All Rights Reserved .
UNIQUE FEATURES
Dual Lamp
Equipped with the highly reliable
Dual Lamp System. If one lamp stops
functioning during use, the second
lamp activates and projects the
image with no interruption in the projection.
Variety of Interchangeable Lenses
Six lenses are available to match various screen sizes and installation
environments. Projection is possible in diverse installation areas from small
conference rooms to auditoriums, convention halls and other large spaces.
DICOM®Simulation Mode
The DICOM (Digital Imaging and Communications in Medicine) Simulation
Mode projects grayscale images which approximate DICOM Part 14
specifications. This mode is ideal for viewing grayscale medical images, such
as X-rays, for training and educational purposes.
The projectors have a DICOM (Digital
Imaging and Communications in
Medicine) Simulation Mode. This mode
simulates the DICOM standard, which
is a standard applicable to digital
communications in medicine, and is
useful for displaying medical images
such as X-rays. These projectors
are not medical devices and are not
compliant with the DICOM standard,
and neither the projector nor the
DICOM Simulation Mode should be
used for medical diagnosis. Comparison photos are simulations.
Geometric Correction
The Geometric Correction function allows images to display on an uneven
surface. (Does not work with the DVI input.)
Edge Blending
Projectors are equipped with the Edge Blending function that achieves the
seamless projection of one image using multiple projectors. Easily performs
blending processing with brightness
adjustment by lamp power mode.
(Edge blending does not work with
DVI input.)
Advanced Installability
and System Features
Projectors feed 4 digital inputs
including 3G SDI.
3G SDI Equipped with standard SDI in
the broadcast industry. 3G SDI can transfer
1080P
signal via
coaxial
cable.
UP to 100 m
Broadcast
camera
Optional Lenses

CP-WU13K DLP®Projector
Input/Outputs
CP-WU13K
HDMI
Hitachi Trade-Up
Program
3 Year Warranty
DLP Technology
Front View
Hitachi America, Ltd.
Toll Free: 1.800.HITACHI •Email: [email protected]
Web: hitachi-america.us/projectors
HI0272-Rev.1-04/14
All specifications subject to change without notice.
DLP
®
and the DLP logo are registered trademarks of Texas Instruments.
©2014 Hitachi America, Ltd. All Rights Reserved .
STANDARD FEATURES
Motorized Zoom, Focus and Lens Shift
Control: Allows for greater range of installation
possibilities. With the motorized function you can make
fine adjustments through the remote control or RS232/
IP device. (FL-K01 and FL-K02 are fixed focus lenses and
FL-K01 is not available for lens shift.)
Multiple Lens Options: 6 optional lenses are avail-
a b l e : F L- K 0 1, F L- K 0 2 , S L- K 0 3 , M L- K 0 4 , L L- K 0 5 , U L- K 0 6 .
PIP Function: This function allows for displaying picture
in picture modes and picture by picture mode. There are 5
options for this feature.
Wired and Wireless Switcher Solutions:
Multifunctional switcher operates in conjunction with
the receiver to provide expanded source selection and
switching options for connected devices. The switcher
is sold as an optional accessory that can provide 1080p
30 fps wireless via WHDI.
Rear
Right Profile
Left Profile
Top View
76 92 104 8531
1. SDI/HDSDI/3G in
2. LAN
3. SDI/HDSDI/3G out
4. RS-232C
5. 12v trigger
6. Wired remote (Terminal
for external IR receiver)
7. Component 1
8. Sync in
9. Sync out
10. Stereo DVI
11. Component 2
12. VGA
111213
15
14
16
13. HDMI 2
14. HDMI 1
15. AC In
16. AC Switch

Display
Projection Technology Three chip DLP
Resolution WUXGA 1920 x 1200
Light Output 13,000 ANSI lumens
Colors 1.07 billion colors
Aspect Ratio Native 16:10; 16:9, 4:3, 5:4, 1.88, 2.35, letter box, unscaled
compatible
Contrast Ratio 2000 : 1
Throw Ratio
(distance : width)
1.87 - 2.56 :1 (with ML-K04 lens, sold separately)
Focus Distance 159" - 868" (with ML-K04 lens, sold separately)
Display Size 100" - 400" (with ML-K04 lens, sold separately)
Lens & Operation
Lens F = 2.5, f = 39.0 - 53.4 mm (with ML-K04 lens, sold separately)
Lamp Wattage 465W x 2
Expected Lamp Life* Approximately 2,000 hours (standard mode)
2,500 hours (Eco mode)
Expected Filter Life** Approximately 10,000 hours Approximately 15,000 hours
Speaker Output N/A
Keystone H: +/- 35º and V: +/- 20º (Note: Input signal is WUXGA @ 50Hz,
Zoom position is Wide max. Does not work with DVI-D input.)
Compatibility
Computer VGA, SVGA, XGA, WXGA/WXGA+/SXGA/SXGA+/WSXGA+/
UXGA/WUXGA (compressed), MAC 16"
H-Sync 15.7 kHz ~ 91 kHz
V-Sync 48 Hz ~ 85 Hz
Component Video 480i, 480p, 576i, 720p, 1080i, 1080p
3D (DVI) 1920 x 1080@120Hz, 1920 x 1080@100Hz, 1920 x 1080@60Hz,
1920 x 1200@120Hz, 1920 x 1200@100Hz, 1920 x 1080@60Hz
HDMI 480i, 480p, 576i, 720p, 1080i, 1080p,
Computer signal TMDS Clock 27 MHz - 150 MHz
3G SDI NTSC, PAL, 1035i, 1080i, 1080p, 720p, 1080Sf
Connectors
Digital Input HDMI x 2 (HDCP compliant), Stereo DVI x 1,
SDI/HDSDI/3G BNC x 1
Computer Input 1 15-pin mini D-sub x 1
Computer Input 2 BNC x 5 (shared with component 2)
Digital Output SDI/HDSDI/3G BNC x 1
Video Input
S-Video N/A
Composite Video N/A
Component Video 5BNC x 1 (shared with computer in 2), 3 RCA jack x 1,
15-pin mini D-sub x 1 (shared with computer in 1)
Audio Input N/A
Audio Output N/A
Network LAN Wired RJ-45 port (10 base-T / 100 base-TX)
Network LAN Wireless N/A
USB N/A
Wired Remote Control 3.5 mm stereo mini jack (Terminal for external IR receiver)
Control Terminals 9-pin D-sub x 1 (RS-232 control),
3.5 mm mini jack x 2 (12V Trigger 1/2)
Ratings & Warranty
Power Supply AC100-130V / AC200-240V, 50/60Hz
Power Consumption 1230W @110VAC/11.2A, 1250W @220VAC/5.3A
Operating Temperature 32ºF - 104ºF (0ºC - 40ºC)
Dimensions (W x D x H)
19.7" x 24.9" x 10.6" (500 x 633 x 270 mm) (excluding protruding parts)
Weight Approximately 74.97 lbs. (34 kg) (without lens)
Approvals UL60950-1/cUL, FCC Part 15 subpart B class A
Warranty 3 year limited parts and labor
Extended Service Contract available (additional cost)
Specifications
CP-WU13K DLP®Projector
* Actual lamp life will vary by individual lamp and based on environmental conditions, selected operating mode, user settings and usage. Hours of average
lamp life specified are not guaranteed and do not constitute part of the product or lamp warranty. Lamp brightness decreases over time.
** Actual filter life will vary by individual filter and based on environmental conditions, selected operating mode, user settings and usage. Hours of average
filter life specified are not guaranteed and do not constitute part of the product warranty.
Hitachi America, Ltd.
Toll Free: 1.800.HITACHI •Email: [email protected]
Web: hitachi-america.us/projectors
HI0272-Rev.1-04/14
All specifications subject to change without notice.
3LCD and the 3LCD logo are registered trademarks of the Seiko Epson Corporation.
©2014 Hitachi America, Ltd. All Rights Reserved .
Accessories and Lenses
Supplied
Accessories
Remote control, power cord, RS232C
cable (cross, male to male), user’s
manual, application CD
Optional
Accessories
MS-1 wired and MS-1WL wireless
multifunction switchers (switchers have
limited function with this projector model)
Optional Lenses 6 optional lenses are available: FL-K01,
F L- K 0 2 , S L- K 0 3 , M L- K 0 4 , L L- K 0 5 , U L- K 0 6 .
Replacement Parts
Lamp DT01591D
Remote Control HL03051
Filter MU08321 (for front), MU08331 (for rear)
Projection Throw Chart
Screen Size 16:10 Throw Distance
Diagonal Width Min Max
100 85 159 217
120 102 190 260
150 127 238 325
200 170 317 434
250 212 397 542
300 254 476 651
350 297 555 759
400 339 635 868
Throw Ratio: 1.87 - 2.56 : 1 (distance : width)
Screen size and throw distance are measured in inches
with standard lens MLK04.
Projection Lens Chart
Lens Inches Meters
FL-K01 113 2.9
FL-K02 190 4.8
ML-K03 235 - 317 6.0 - 8.1
ML-K04 317 - 434 8.1 - 11.0
LL-K05 434 - 706 11.0 - 17.9
UL-K06 706 - 1180 17.9 - 30.0
Projection distances measured in inches and meters with standard lens
and optional lenses when projecting onto a 200" diagonal screen.
Lens Shift
FL-K01 FL-K02 SL-K03 ML-K04 LL-K05 LL-K06
Left
Right N/A
-10 ~ +10 -10 ~ +10 -10 ~ +10 -10 ~ +10 -10 ~ +10
Up
Down N/A
+50 ~ -25 +50 ~ -25 +50 ~ -25 +50 ~ -25 +50 ~ -25