Hitachi CP-X880 User manual

ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
NORSK
PORTGÊS
中中文文
REGULATORY
NOTICES
USER'S MANUAL Vol.1 Basic
Please read this user's manual thoroughly to ensure correct usage through understanding.
BEDIENUNGSANLEITUNG Teil 1 Grundlagen
Bitte lessen Sie diese Benutzerhandbuch zugunsten der korrekten Bedienung aufmerksam.
MANUEL D'UTILISATION Vol.1 Fondements
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de
l'appareil.
MANUALE D'ISTRUZIONI Vol.1 Informazioni di base
Vi preghiamo voler leggere attentamente il manuale d'istruzioni in modo tale da poter comprendere
quanto riportato ai fini di un corretto utilizzo del proiettore.
MANUAL DE USUARIO Vol.1 Básico
Lea cuidadosamente este manual del usuario para poder utilizar corretamente el producto.
GEBRUIKSAANWIJZING Vol.1 Basis
Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van
de uitgebreide mogelijkheden.
BRUKERHÅNDBOK Vol.1 Grunnleggende
Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.
NSTRUÇÕES DO PROPRIETÁRIO Vol.1 Básico
Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do utilizador.
Liquid Crystal Projector
CP-X880/CP-X885
(CP-X880W/CP-X885W)
00CP-X885WBasic-四02.10.76:55PMページ2
www.touchboards.com 205 Westwood Ave.Long Branch, NJ 07740 1-866-942-6273
[email protected]

1
LCD Projector CP-X880/CP-X885
USER'S MANUAL
USER'S MANUAL Vol.1 (Basic)
Page
PROJECTOR FEATURES................2
PREPARATIONS ..............................2
PART NAMES...................................4
SETTING UP
THE PROJECTOR ............................6
CONNECTING
YOUR DEVICES................................8
USING THE REMOTE
CONTROL.......................................13
TURNING ON THE POWER ...........15
TURNING OFF THE POWER .........17
ADJUSTING THE VOLUME ...........18
TEMPORARILY MUTING
THE SOUND....................................18
ADJUSTING THE POSITION..........19
USING THE AUTOMATIC
ADJUSTMENT FEATURE ..............20
CORRECTING KEYSTONE
DISTORTIONS ................................21
Page
USING THE MAGNIFY
FEATURE........................................22
FREEZING THE SCREEN ..............22
ADJUSTING SCREEN WITH
ONE-TOUCH...................................23
SELECTING THE ASPECT
RATIO..............................................24
TEMPORARILY BLANKING
THE SCREEN..................................24
DISPLAYING CHILD WINDOW
(P. IN. P: Picture in Picture) ..........24
USING THE MENU
FUNCTIONS....................................25
OPERATING THE PC SCREEN .....26
THE LAMP ......................................27
THE AIR FILTER.............................29
OTHER CARE.................................31
CONTENTS
Thank you for purchasing this projector.
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual
• The reproduction, transmission or use of this document or contents is not permitted without express
written authority.
TRADEMARK ACKNOWLEDGEMENT :
• PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation.
• Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• All other trademarks are the property of their respective owners.
NOTE
WARNING • Please read the accompanying manual “SAFETY
INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct
usage through understanding. After reading, store this instruction manual in a
safe place for future reference.
01CP-X885W/Vol1/E-責02.10.89:05PMページ1

2
●
Ultra High Brightness
Crisp, ultra-bright presentations is achieved
by using a UHB (ultra high brightness) lamp
and a highly efficient optical system
●
Partial Magnification Function
Interesting parts of images can be magnified
for closer viewing
●
One Touch Function
Just press the ONE TOUCH button to
automatically retrieve input signals, calibrate
images, and correct keystone distortion
●
Whisper Mode Equipped
Special mode is available for reducing
projector noise to achieve quieter operation
PREPARATIONS Your projector should come with the items
shown below. Check to make sure that all the
items are included. Contact your dealer if
anything is missing.
Projector
(with Lens Cap)
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
NORSK
PORTGÊS
中中文文
REGULATORY
NOTICES
USER'S MANUAL Vol.1 Basic
Pleaseread this user's manual thoroughly to ensure correct usage through understanding.
BEDIENUNGSANLEITUNG Teil 1 Grundlagen
Bittelessen Sie diese Benutzerhandbuch zugunsten der korrekten Bedienung aufmerksam.
MANUEL D'UTILISATION Vol.1Fondements
Nousvous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de
l'appareil.
MANUALE D'ISTRUZIONI Vol.1 Informazioni di base
Vipreghiamo voler leggere attentamente il manuale d'istruzioni in modo tale da poter comprendere
quantoriportato ai fini di un corretto utilizzo del proiettore.
MANUAL DE USUARIO Vol.1 Básico
Leacuidadosamente este manual del usuario para poder utilizar corretamente el producto.
GEBRUIKSAANWIJZING Vol.1 Basis
Leesvoor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van
deuitgebreide mogelijkheden.
BRUKERHÅNDBOK Vol.1 Grunnleggende
Vennligstles denne bruksanvisningen grundig for å være garantert driftssikker bruk.
NSTRUÇÕES DO PROPRIETÁRIO Vol.1 Básico
Paraassegurar o uso correto do equipamento, por favor leia atentamente este manual do utilizador.
Liquid Crystal Projector
CP-X880/CP-X885
(CP-X880W/CP-X885W)
User's Manuals
(Vol.1/Vol.2)
Safety Instructions
Soft carrying case
Power cord
(US Type)
RS-232C
adapter
Power cord
(UK Type) Power cord
(Europe Type)
RGB cable USB mouse
cable
Remote control
Two AA batteries
(for the remote
control)
Video/Audio cable
PROJECTOR
FEATURES
This liquid crystal projector is used to project
various computer signals as well as NTSC / PAL /
SECAM video signals onto a screen. Little space
is required for installation and large images can
easily be realized.
• Keep the original packing material for future reshipment.
NOTE
STANDBY/ON
VIDEO
UP
DOWN
BLANK
ASPECT
PUSH
LASER
INDICATOR
LASER
RGB
FOCUS
ENTER
ON
OFF
ESC MENU RESET
POSITION
MAGNIFY VOLUME
MUTE
WIRELESS KEYSTONE
FREEZE
ONE TOUCH
AUTO PinP
ZOOM PAG E
01CP-X885W/Vol1/E-責02.10.89:05PMページ2

3
1Connect your devices to the projector
Connect your computer, VCR and/or other
devices you will be using to the projector.
Insert the batteries into the remote
control
2
13
3Connect the power cord
(1) Connect the connector of the electrical power cord to the AC inlet of the main unit.
(2) Firmly plug the power cord's plug into the outlet
WARNING Precautions to observe in regards to the power cord: Please use extra
caution when connecting the projector's power cord as incorrect or faulty
connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please adhere to the
following safety guidelines to insure safe operation of the projector:
•
Only plug the power cord into outlets rated for use with the power cord's specified voltage range.
• Only use the power cord that came with the projector.
• NEVER ATTEMPT TO DEFEAT THE GROUND CONNECTION OF THE THREE-
PRONGED PLUG!
• Make sure that you firmly connect the power cord to the projector and wall outlet.
〜
812
(1)
(2)
Power outlet
Power cord
AC inlet
01CP-X885W/Vol1/E-責02.10.89:05PMページ3

4
PART NAMES THE PROJECTOR Indicates the
corresponding
reference page
Air filter
29
Elevator button
6
Elevator screw
6
COMPONENT indicator
16
S-VIDEO indicator 16
VIDEO indicator 16
DVI indicator 16
BNC indicator 16
RGB indicator 16
INPUT dial 16
ZOOM button
16
FOCUS button
16
RESET button
19
MENU button
25
ONE TOUCH button
22
KEYSTONE button
21
TEMP indicator
9
LAMP indicator
9
Lens
15
Remote sensor
14
Lens cap 15
Elevator feet 6
Remote sensor
14
S-VIDEO IN port
12
VIDEO IN port
12
DVI port 11
RGB port 10
BNC port 11
AUDIO IN R/L port 12
AUDIO IN 1/2 port
10
AUDIO OUT port
9
REMOTE CONTROL port
14
CONTROL port 10
WIRELESS & NETWORK
MODULE port Vol.2
7
RGB OUT port 12
USB port
10
COMPONENT VIDEO port 12
Power switch
15
STANDBY/ON
INPUT KEYSTONE
RESET
MENU
LANP
TENP
ONE TOUCH
RGB
BNC
DVI
VIDEO
S-VIDEO
COMPONENT
FOCUS ZOOM
Control Panel
AC power inlet
3
STANDBY/ON button 15
Vol.2
Vol.2
01CP-X885W/Vol1/E-責02.10.89:05PMページ4

5
THE REMOTE CONTROL
ZOOM buttons
16
Right mouse button
26
VIDEO button 16
LASER INDICATOR 14 RGB button
16
LASER button
14
FOCUS buttons 16
PAGE buttons
26
BLANK button 24
ASPECT button 24
ESC button 25
MENU button 25
POSITION button 19
MAGNIFY buttons 22
KEYSTONE button 21
REMOTE CONTROL port 14
Left /Right
Key buttons 25
Lever switch (*)
25
RESET button
19
AUTO button
20
PinP button
24
VOLUME button
18
MUTE button
18
FREEZE button
22
ONE TOUCH button
23
STANDBY/ON
VIDEO
UP
DOWN
BLANK
ASPECT
PUSH
LASER
INDICATOR
LASER
RGB
FOCUS
ENTER
ON
OFF
ESC MENU RESET
POSITION
MAGNIFY VOLUME
MUTE
WIRELESS KEYSTONE
FREEZE
ONE TOUCH
AUTO PinP
ZOOM PAGE
15
STANDBY/ON button
<For mouse control>
Mouse cursor movement
Left mouse click
<For mouse control>
Right mouse click
* Using the lever switch
Flip toward disk pad : Up ( ) key
Flip toward MENU button : Down ( ) key
Press in center : ENTER button
WIRELESS button Vol.2
7
26
Disk pad
01CP-X885W/Vol1/E-責02.10.89:05PMページ5

6
Adjusting the Projector's Elevator Feet
1Press and hold in the elevator
buttons
2Raise or lower the projector to the
desired height and then release the
elevator buttons
When you release the elevator buttons, the elevator
feet will lock into position.
3Turn the elevator screw to fine tune.
If the surface on which the projector is placed, or the screen is tilted, use the
elevator feet and elevator screw to adjust the projection angle of the main unit.
The adjustment range of the elevator feet is 0 to 9 degrees.
CAUTION • Install the projector in a suitable environment according to instructions
of the accompanying manual “SAFETY INSTRUCTIONS”and this manual.
•If you press the elevator buttons without holding the projector, the projector might
crash down, overturn, smash your fingers and possibly result in malfunction. To
prevent damaging the projector and injuring yourself, ALWAYS HOLD THE
PROJECTOR whenever using the elevator buttons to adjust the elevator feet.
SETTING UP THE PROJECTOR
Elevator button
Elevator feet
Elevator screw
01CP-X885W/Vol1/E-責02.10.89:05PMページ6

7
Refer to the illustrations and tables below to determine the screen size and
projection distance.
Adjusting the Screen Size and Projection Distance
Top view
a
cLens center
The screen
Side view
Top view
a
c
b
Lens center
The screen
Side view
If 4:3 aspect ratio
If 16:9 aspect ratio
4
3
9
16
The values shown in the table are calculated for a full size screen
a:Distance from the projector to the screen (±10%)
b:Distance from the lens center to the bottom of the screen (±10%)
c:Distance from the lens center to the top of the screen (±10%)
Screen Size [inch (m)] a [inch (m)] b
[inch (cm)]
c
[inch (cm)]
Min. Max.
30 (0.8) 34 (0.9) 52 (1.3) 0 (0) 18 (46)
40 (1.0) 46 (1.2) 71 (1.8) 0 (0) 24 (61)
50 (1.3) 58 (1.5) 89 (2.3) 0 (0) 30 (76)
60 (1.5) 71 (1.8) 107 (2.7) 0 (0) 36 (91)
70 (1.8) 83 (2.1) 126 (3.2) 0 (0) 42 (107)
80 (2.0) 95 (2.4) 144 (3.7) 0 (0) 48 (122)
90 (2.3) 108 (2.7) 162 (4.1) 0 (0) 54 (137)
100 (2.5) 120 (3.0) 181 (4.6) 0 (0) 60 (152)
120 (3.0) 144 (3.7) 217 (5.5) 0 (0) 72 (183)
150 (3.8) 181 (4.6) 272 (6.9) 0 (0) 90 (229)
200 (5.0) 243 (6.2) 364 (9.2) 0 (0) 120 (305)
250 (6.3) 304 (7.7) 455 (11.6) 0 (0) 150 (381)
300 (7.5) 366 (9.3) 547 (13.9) 0 (0) 180 (457)
Screen Size [inch (m)] a [inch (m)] b
[inch (cm)]
c
[inch (cm)]
Min. Max.
30 (0.8) 37 (0.9) 57 (1.4) 2 (6.2) 17 (44)
40 (1.0) 50 (1.3) 77 (2.0) 13 (32) 27 (70)
50 (1.3) 64 (1.6) 97 (2.5) 16 (41) 31 (78)
60 (1.5) 77 (2.0) 117 (3.0) 19 (49) 34 (86)
70 (1.8) 90 (2.3) 137 (3.5) 22 (57) 37 (94)
80 (2.0) 104 (2.6) 157 (4.0) 26 (65) 40 (102)
90 (2.3) 117 (3.0) 177 (4.5) 29 (73) 43 (110)
100 (2.5) 131 (3.3) 197 (5.0) 32 (81) 47 (118)
120 (3.0) 157 (4.0) 237 (6.0) 38 (97) 53 (134)
150 (3.8) 198 (5.0) 296 (7.5) 48 (121) 63 (159)
200 (5.0) 265 (6.7) 396 (10.1) 64 (162) 78 (199)
250 (6.3) 332 (8.4) 496 (12.6) 80 (202) 94 (240)
300 (7.5) 399 (10.1) 596 (15.1) 96 (243) 110 (280)
01CP-X885W/Vol1/E-責02.10.89:05PMページ7

8
Display monitors
12
DVD players
11
VCRs
11
Laptop computers
10
Desktop computers
10
Indicates the
corresponding
reference page
ATTENTION Precautions to observe when connecting other devices to the projector
•Whenever attempting to connect other devices to the projector, please thoroughly
read the manual of each device to be connected.
•TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to
connect a live device to the projector may generate extremely loud noises or other
abnormalities that may result in malfunction and/or damage to the device and/or
projector. Refer to the “TECHNICAL”of the USER’S MANUAL (Vol.2) for the pin
assignment of connectors and RS-232C communication data.
•Make sure that you connect devices to the correct port. Incorrect connection may
result in malfunction and/or damage to the device and/or projector.
•Some other cables have to be used with core set. Use the accessory cable or a
designated-type cable for the connection. For cables that have a core only at one
end, connect the core to the projector.
•Secure the screws on the connectors and tighten.
CONNECTING YOUR DEVICES
Devices You Can Connect to the Projector
(Refer to this section for planning your device
configuration to use for your presentation.)
CAUTION •Incorrect connecting could result in fire or electrical shock. Please
read this manual and the separate “SAFETY INSTRUCTIONS”.
01CP-X885W/Vol1/E-責02.10.89:05PMページ8

9
Ports and Cables
Refer to the table below to find out which projector port and cable to use for connecting a
given device. Use this table for determining which cables to prepare.
* Before using the BNC port, change RGB input to component video input on the BNC menu item of
the INPUT menu.
About Plug-and-Play Capability
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting
this projector to computers that are VESA DDC (display data channel) compatible. Please take
advantage of this function by connecting the accessory RGB cable to the RGB port (DDC 1/2B
compatible). Plug-and-Play may not work properly if any other type of connection is attempted.
•Plug-and-Play is a system composed of the computer, its operating system and
peripheral equipment (i.e. display devices).
•Please use the standard drivers as this projector is a Plug-and-Play monitor.
NOTE
Function Projector Port Connection Cables
Analog RGB input
RGB
RGB cable
(With D-sub 15-pin shrink jack and inch
thread screws)
BNC(R/CR/PR)(G/Y)(B/CB/PB)(H)(V)
•When BNC (RGB) is selected (*) BNC cable
Analog output RGB OUT
RGB cable
(With D-sub 15-pin shrink jack and inch
thread screws)
DVI input DVI DVI cable
Audio input from computer
AUDIO IN 1
•
Linked to RGB or DVI port input
Audio/video cable (Stereo mini)
AUDIO IN 2
•
Linked to BNC (RGB) port input (*)
USB mouse control USB USB cable
PS/2 mouse control
CONTROL
PS/2 mouse cable
ADB mouse control ADB mouse cable
Serial mouse control Serial mouse cable
RS-232C communications RS-232C adapter + RS-232C cable
S video input S-VIDEO IN S-video cable (mini DIN 4-pin jack)
Video input VIDEO IN Audio/video cable
Component video input
COMPONENT(CR/PR)(CB/PB)(Y)
Component video cable
BNC(R/CR/PR)(G/Y)(B/CB/PB)
•When BNC (COMPONENT) is
selected (*)
Audio input from video equipment AUDIO IN R,L Audio/video cable or audio cable (RCA jack)
Audio output AUDIO OUT Audio cable (Stereo mini)
Wired remote control signal input REMOTE CONTROL Audio cable (Stereo mini)
01CP-X885W/Vol1/E-責02.10.89:05PMページ9

10
Laptop computer
CONNECTING YOUR DEVICES (continued)
Connecting to a Computer
ATTENTION Whenever attempting to connect a laptop computer to the projector,
be sure to activate the laptop's RGB external image output (set the laptop to CRT
display or to simultaneous LCD and CRT display). For details on how this is done,
please refer to the instruction manual of the corresponding laptop computer.
•Some computers may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
•For some RGB input modes, the optional Mac adapter is necessary.
NOTE
AUDIO cable
(Stereo mini)
B
A
VIDEO INR-AUDIO IN-L S-VIDEO IN
RGB
BNC AUDIO IN USBAUDIO OUT
R/CR/PRG/Y B/Ca/Pa H V
Y
12
DV I
RGB OUT CONTROL
CR/PRCa/Pa COMPONENT VIIDEO
REMOTE
CONTROL
B
A
RGB cable
Analogue RGB OUT
AUDIO OUT
CONTROL OUT
MOUSE cable
RGB cable
Analogue RGB OUT
B
AD
C
VIDEO INR-AUDIO IN-L S-VIDEO IN
RGB
BNC AUDIO IN USBAUDIO OUT
R/CR/PRG/Y B/Ca/Pa H V
Y
12
DV I
RGB OUT CONTROL
CR/PRCa/Pa COMPONENT VIIDEO
REMOTE
CONTROL
A B
CD
AUDIO cable
(Stereo mini) AUDIO OUT
If connecting to a
USB port equipped
computer
USB cable
USB OUT
Desktop computer
01CP-X885W/Vol1/E-責02.10.89:05PMページ10

11
Desktop computer Desktop computer
BNC Input DVI Input
Connecting to a Computer (continued)
BNC cable
AB
VIDEO INR-AUDIO IN-L S-VIDEO IN
RGB
BNC AUDIO IN USBAUDIO OUT
R/CR/PRG/Y B/Ca/Pa H V
Y
12
DV I
RGB OUT CONTROL
CR/PRCa/Pa COMPONENT VIIDEO
REMOTE
CONTROL
B
A A A A A
AUDIO cable
(Stereo mini) AUDIO OUT
BNC OUT
DVI cable
AB
VIDEO INR-AUDIO IN-L S-VIDEO IN
RGB
BNC AUDIO IN USBAUDIO OUT
R/CR/PRG/Y B/Ca/Pa H V
Y
12
DV I
RGB OUT CONTROL
CR/PRCa/Pa COMPONENT VIIDEO
REMOTE
CONTROL
B
A
AUDIO cable
(Stereo mini) AUDIO OUT
DVI OUT
01CP-X885W/Vol1/E-責02.10.89:05PMページ11

12
DVD player
VCR
Connecting to a DVD Player
Connecting to a VCR
CONNECTING YOUR DEVICES (continued)
Connecting to a Display Monitor
Display monitor
RGB cable
RGBIN
A
VIDEO INR-AUDIO IN-L S-VIDEO IN
RGB
BNC AUDIO IN USBAUDIO OUT
R/CR/PRG/Y B/Ca/Pa H V
Y
12
DV I
RGB OUT CONTROL
CR/PRCa/Pa COMPONENT VIIDEO
REMOTE
CONTROL
A
BC A
VIDEO INR-AUDIO IN-L S-VIDEO IN
RGB
BNC AUDIO IN USBAUDIO OUT
R/CR/PRG/Y B/Ca/Pa H V
Y
12
DV I
RGB OUT CONTROL
CR/PRCa/Pa COMPONENT VIIDEO
REMOTE
CONTROL
A A A
BBB C
Ifusingacomponent
videoconnection
Ifusinganaudio/video
connection
COMPONENT OUT AUDIO/VIDEO OUT
S-VIDEO OUT
If using a S-video
connection
COMPONENT VIDEO cable
AUDIO/VIDEO cable
S-VIDEO cable
BA
VIDEO INR-AUDIO IN-L S-VIDEO IN
RGB
BNC AUDIO IN USBAUDIO OUT
R/CR/PRG/Y B/Ca/Pa H V
Y
12
DV I
RGB OUT CONTROL
CR/PRCa/Pa COMPONENT VIIDEO
REMOTE
CONTROL
A A A B
If using a S-video
connection
AUDIO/VIDEO
OUT
S-VIDEOOUT
AUDIO/VIDEO cable
S-VIDEO cable
01CP-X885W/Vol1/E-責02.10.89:05PMページ12

13
1Remove the battery cover
Slide back and remove the battery cover in the direction of the
arrow.
Insert the batteries
Align and insert the two AA batteries (that came with the
projector) according to their plus and minus terminals (as
indicated in the remote control).
Close the battery cover
Replace the battery cover in the direction of the arrow and
snap it back into place.
2
3
USING THE REMOTE CONTROL
CAUTION Precautions to observe in regards to the batteries
Always handle the batteries with care and use them only as directed. Improper use may result in
battery cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.
•Keep the battery away from children and pets.
•
Be sure to use only the batteries specified for use with the remote control. Do not mix new batteries with used ones.
• When inserting batteries, verify that the plus and minus terminals are aligned correctly (as indicated in the remote control).
•When you dispose the battery, you should obey the law in the relative area or country.
Putting batteries into the remote control unit
01CP-X885W/Vol1/E-責02.10.89:05PMページ13

• The remote control works with both the
projector's front and rear remote sensors.
• The range of the remote sensor on the front is 3
meters with a 60-degree range (30 degrees to the
left and right of the remote sensor), and back is 3
meters with a 40-degree range.
• Since the remote control uses infrared light to send
signals to the projector (Class 1 LED), be sure to use
the remote control in an area free from obstacles
that could block the remote control's output signal to
the projector.
• The wired remote control:
You can use the remote control as a wired remote control, by connecting the REMOTE CONTROL ports of the
main unit and remote control via an audio cable (3.5 dia. stereo mini cable with plugs).
approximately
3 meters
30 degrees
30 degrees
approximately
3 meters
20 degrees
20 degrees
Precautions to observe when using the remote control
•Do not disassemble the remote control.
•Do not drop or otherwise expose the remote control to physical impact.
•
Do not get the remote control wet or place it on wet objects. Doing so may result in malfunction.
•Do not place the remote control near the projector’s lens, fan, or vents.
•Remove the batteries from the remote control and store them in a safe place if you
won't be using the remote control for an extended period.
•Replace the batteries whenever the remote control starts to malfunction.
•
When strong light, such as direct sunlight or light from an extremely close range (such as from an
inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to function.
Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor.
ATTENTION
14
Operating the remote control
USING THE REMOTE CONTROL (continued)
WARNING • The laser pointer of the remote control transmitter is used in
place of a finger or rod. Never look directly into the laser beam outlet or point
the laser beam at other people. The laser beam can cause vision problems.
CAUTION • Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
01CP-X885W/Vol1/E-責02.10.89:05PMページ14

15
1
Make sure that the power cord is firmly and
correctly connected to the projector and outlet
2Turn on the projector's power
Set the power switch to [ | ] (ON). The STANDBY/ON
indicator will light to solid orange.
3Press the STANDBY/ON button (control
panel or remote control)
•The projector begins warming up and the
STANDBY/ON indicator blinks green.
•The STANDBY/ON indicator stops blinking
and lights to solid green once the
projector's power is completely on.
4Remove the lens cap
The picture is projected.
power switch
STANDBY/ON indicator
3
STANDBY/ON
VIDEO
UP
DOWN
BLANK
LASER
INDICATOR
LASER
RGB
FOCUS ZOOM PAGE
TURNING ON THE POWER
Precautions
Connect all devices to be used to the projector prior to turning on the power.
12
8〜
WARNING When the power is ON, a strong light is emitted. Do not look into the
lens.
Turn the
power on/off in
right order.
•Power on the
projector before the
computer or video
tape recorder.
•Power off the
projector after the
computer or video
tape recorder.
NOTE
Control panel
STANDBY/ON
INPUT KEYSTONE
RESET
MENU
LANP
TENP
ONE TOUCH
RGB
BNC
DVI
VIDEO
S-VIDEO
COMPONENT
FOCUS ZOOM
STANDBY/ON
01CP-X885W/Vol1/E-責02.10.89:05PMページ15

6Use the ZOOM / buttons to adjust
the screen size
7Use the FOCUS / buttons to adjust
the focus
5
If selecting RGB input
Press the RGB button
Press this button to toggle between the devices
connected to RGB IN 1 and 2. As illustrated
below, each time you press the RGB button, the
projector switches between RGB IN 1 and 2.
Select the signal you wish to project.
If selecting video input
Press the VIDEO button
Press this button to toggle between the
devices connected to VIDEO IN, S-VIDEO
IN and COMPONENT VIDEO. As
illustrated below, each time you press the
VIDEO button, the projector switches between
VIDEO IN, S-VIDEO IN and COMPONENT VIDEO.
Select the signal you wish to project.
Using the remote control
Turn the INPUT dial
Turning the dial cycles
through the inputs as
shown below. Select the
terminal to which the signal
you want to project is input.
Using the projector's control panel
INPUT
G
B
Selecting an Input Signal
16
TURNING ON THE POWER (continued)
RGB
VIDEO
VIDEO IN S-VIDEO IN COMPONENT VIDEO
VIDEO IN S-VIDEO IN COMPONENT VIDEO
BNC(COMPONENT)
RGB BNC(RGB) DVI
RGB DVI
• When BNC (RGB) is selected:
• When BNC (RGB) is selected:
• When BNC (COMPONENT) is selected:
• When BNC (RGB) is selected:
• When BNC (COMPONENT) is selected:
RGB BNC(RGB) DVI
S-VIDEO VIDE
O
COMPONENT VIDEO
RGB BNC(COMPONENT) DVI
S-VIDEO VIDE
O
COMPONENT VIDEO
• When BNC (COMPONENT) is selected:
ZOOM
ZOOM
(Remote control)(Control panel)
(Remote control)(Control panel)
FOCUS
FOCUS
Turn the INPUT dial and set it at the
click point, otherwise input signal
selection may be incorrect.
NOTE
01CP-X885W/Vol1/E-責02.10.89:05PMページ16

17
1Press the STANDBY/ON button (control
panel or remote control)
The message "Power off?" will appear on the screen for
approximately 5 seconds.
3Check that the STANDBY/ON indicator
stops blinking and lights to
solid orange.
Switch the power switch to
[O] (OFF).
4
Confirm that the STANDBY/ON indicator has
gone off and then attach the lens cap.
When the projector has completed powering down, the
STANDBY/ON indicator will go off.
TURNING OFF THE POWER
2Press the STANDBY/ON button again
(control panel or remote control)
Press the STANDBY/ON button again while the "Power off?"
message is visible. The projector lamp goes off and starts cooling
down. While cooling, the STANDBY/ON indicator flashes orange.
When in this state, pressing the STANDBY/ON button has no
effect.
When lamp cooling is complete, the STANDBY/ON indicator stops
flashing, and turning solid orange.
• Except in cases of
emergency, do not turn off
the power switch while the
STANDBY/ON indicator is
solid or flashing green.
Doing so could shorten
the lamp lifetime.
NOTE
Control panel
STANDBY/ON
INPUT KEYSTONE
RESET
MENU
LANP
TENP
ONE TOUCH
RGB
BNC
DVI
VIDEO
S-VIDEO
COMPONENT
FOCUS ZOOM
STANDBY/ON indicator
STANDBY/ON
STANDBY/ON
STANDBY/ON
VIDEO
UP
DOWN
BLANK
ASPECT
PUSH
LASER
INDICATOR
LASER
RGB
FOCUS
ENTER
ON
OFF
ESC MENU RESET
POSITION
MAGNIFY VOLUME
MUTE
WIRELESS KEYSTONE
FREEZE
ONE TOUCH
AUTO PinP
ZOOM PAG E
power switch
01CP-X885W/Vol1/E-責02.10.89:05PMページ17

1Press the VOLUME button
As illustrated on the right, a dialog will
appear on the screen to aid you in adjusting
the volume.
1Press the MUTE button
As illustrated on the right, a dialog will appear on the
screen indicating that you have muted the sound. Press
the VOLUME button to close the dialog. (Even if you don't
do anything, the dialog will automatically disappear after
a few seconds.)
Press the MUTE button again to restore the sound.
2
Use the lever switch / to adjust the
volume
Press the VOLUME button again to close the dialog and
complete this operation. (Even if you don't do anything, the
dialog will automatically disappear after a few seconds.)
Press this to increase the volume
Press this to decrease the volume
16
VOLUME
16
VOLUME
16
VOLUME
ADJUSTING THE VOLUME
TEMPORARILY MUTING THE SOUND
18
STANDBY/ON
VIDEO
UP
DOWN
BLANK
ASPECT
PUSH
LASER
INDICATOR
LASER
RGB
FOCUS
ENTER
ON
OFF
ESC MENU RESET
POSITION
MAGNIFY VOLUME
MUTE
WIRELESS KEYSTONE
FREEZE
ONE TOUCH
AUTO PinP
ZOOM PAG E
VOLUME
MUTE
DOWN
BLANK
ASPECT
PUSH
LASER
ENTER
ON
OFF
ESC MENU RESET
POSITION
MAGNIFY VOLUME
MUTE
WIRELESS KEYSTONE
FREEZE
ONE TOUCH
AUTO PinP
01CP-X885W/Vol1/E-責02.10.89:05PMページ18

19
1Press the POSITION button
As illustrated on the right, a dialog will appear on the screen to
aid you in adjusting the position.
2Use the , , , buttons to adjust the
position
When you want to initialize the position, press the RESET
button during adjustment.
Press the POSITION button again to close the dialog and
complete this operation. (Even if you don't do anything, the
dialog will automatically disappear after a few seconds.)
This function is only available for RGB/BNC (RGB) input.
ADJUSTING THE POSITION
POSITION
STANDBY/ON
VIDEO
UP
DOWN
BLANK
ASPECT
PUSH
LASER
INDICATOR
LASER
RGB
FOCUS
ENTER
ON
OFF
ESC MENU RESET
POSITION
MAGNIFY VOLUME
MUTE
WIRELESS KEYSTONE
FREEZE
ONE TOUCH
AUTO PinP
ZOOM PAG E
POSITION
01CP-X885W/Vol1/E-責02.10.89:05PMページ19