Hitachi Deskstar 7K400 User manual

Hard Disk Drive Specification
Deskstar 7K400
3.5 inch Ultra ATA/133 hard disk drive
3.5 inch Serial ATA hard disk drive
Models: HDS724040KLAT80
HDS724040KLSA80
Version 1.7 12 September 2006

Hard Disk Drive Specification
Deskstar 7K400
3.5 inch Ultra ATA/133 hard disk drive
3.5 inch Ultra Serial/ATA hard disk drive
Models: HDS724040KLAT80
HDS724040KLSA80
Version 1.7 12 September 2006

1st Edition (Revision 0.1) (02 February 2004) Preliminary
2nd Edition (Revision 1.0) (05 April 2004) Revision
3rd Edition (Revision 1.1) (06 April 2004) Revision
4th Edition (Revision 1.2) (14 June 2004) Revision
5th Edition (Revision 1.3) (24 June 2004) Revision
6th Edition (Revision 1.4) (19 August 2004) Revision
7th Edition (Revision 1.5)(21 September 2005) Revision
8th Edition (Revision 1.6)(04 May 2006) Revision
9th Edition (Revision 1.7) (12 September 2006) Final
The following paragraph does not apply to the United Kingdom or any country where such provisions are
inconsistent with local law: HITACHI GLOBAL STORAGE TECHNOLOGIES PROVIDES THIS PUBLI-
CATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUD-
ING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer or express or implied warranties in
certain transactions, therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in new editions of the publication. Hitachi may make
improvements or changes in any products or programs described in this publication at any time.
It is possible that this publication may contain reference to, or information about, Hitachi products (machines and
programs), programming, or services that are not announced in your country. Such references or information must not
be construed to mean that Hitachi intends to announce such Hitachi products, programming, or services in your coun-
try.
Technical information about this product is available by contacting your local Hitachi Global Storage Technologies
representative or on the Internet at
http://www.hitachigst.com
Hitachi Global Storage Technologies may have patents or pending patent applications covering subject matter in this
document. The furnishing of this document does not give you any license to these patents. ©Copyright Hitachi Glo-
bal Storage Technologies
Note to U.S. Government Users - Documentation related subject to restricted rights - Use, duplication or disclosure is
subject to restrictions set forth in GSA ADP Schedule Contract with Hitachi Global Storage Technologies Inc.

Deskstar 7K400 Hard Disk Drive Specification
Table of Contents
1.0 General..............................................................................................................1
1.1 Introduction.............................................................................................1
1.2 References...............................................................................................1
1.3 Abbreviations..........................................................................................1
1.4 Caution....................................................................................................3
2.0 General features of the drive ..........................................................................5
3.0 Fixed-disk subsystem description...................................................................9
3.1 Control electronics..................................................................................9
3.2 Head disk assembly ...............................................................................9
3.3 Actuator ..................................................................................................9
4.0 Drive characteristics........................................................................................11
4.1 Default logical drive parameters.............................................................11
4.2 Data sheet................................................................................................12
4.3 World Wide Name Assignment..............................................................12
4.4 Drive organization ..................................................................................12
4.4.1 Drive format....................................................................................12
4.4.2 Cylinder allocation..........................................................................13
4.5 Performance characteristics....................................................................14
4.5.1 Command overhead........................................................................14
4.5.2 Mechanical positioning...................................................................15
4.5.3 Drive ready time .............................................................................16
4.5.4 Data transfer speed..........................................................................17
4.5.5 Throughput......................................................................................18
4.5.6 Operating modes.............................................................................19
5.0 Defect flagging strategy...................................................................................21
6.0 Specification .....................................................................................................23
6.1 Electrical Interface..................................................................................23
6.1.1 Connector location..........................................................................23
6.1.2 DC power connector.......................................................................24
6.1.3 AT signal connector........................................................................24
6.2 Signal definitions (PATA model)...........................................................25
6.3 Signal descriptions..................................................................................26
6.4 Interface logic signal levels (PATA model) ...........................................29
6.4.1 Signal definition (SATA model).....................................................29
6.4.2 Out of band signaling (SATA model).............................................30
6.5 Signal timings (PATA model)................................................................31
6.5.1 Reset timings...................................................................................31
6.6 PIO timings.............................................................................................32
6.6.1 Write DRQ interval time.................................................................32
6.6.2 Read DRQ interval time .................................................................33
6.7 Multi word DMA timings.......................................................................34
6.8 Ultra DMA timings.................................................................................35
6.8.1 Initiating Read DMA ......................................................................35

Deskstar 7K400 Hard Disk Drive Specification
6.8.2 Host Pausing Read DMA................................................................36
6.8.3 Host Terminating Read DMA.........................................................37
6.8.4 Device Terminating Read DMA.....................................................38
6.8.5 Initiating Write DMA .....................................................................39
6.8.6 Device Pausing Write DMA...........................................................40
6.8.7 Device Terminating Write DMA....................................................41
6.8.8 Host Terminating Write DMA........................................................42
6.9 Addressing of registers ...........................................................................43
6.9.1 Cabling............................................................................................43
7.0 Jumper Settings................................................................................................45
7.1 Connector location..................................................................................45
7.1.1 Jumper pin identification ................................................................45
7.1.2 Jumper pin assignment....................................................................46
7.1.3 Jumper positions .............................................................................46
7.2 Environment............................................................................................50
7.2.1 Temperature and humidity..............................................................50
7.2.2 Corrosion test..................................................................................51
7.3 DC power requirements..........................................................................51
7.3.1 Input voltage ...................................................................................51
7.3.2 Power supply current (typical)........................................................51
7.3.3 Power supply generated ripple at drive power connector...............52
7.4 Reliability................................................................................................53
7.4.1 Data integrity ..................................................................................53
7.4.2 Cable noise interference..................................................................53
7.4.3 Start/stop cycles..............................................................................53
7.4.4 Preventive maintenance..................................................................53
7.4.5 Data reliability ................................................................................53
7.4.6 Required power-off sequence.........................................................53
7.5 Mechanical specifications.......................................................................54
7.5.1 Physical dimensions and weight.....................................................54
7.5.2 Mounting hole locations .................................................................55
7.5.3 Connector locations ........................................................................56
7.5.4 Drive mounting...............................................................................57
7.5.5 Heads unload and actuator lock......................................................57
7.6 Vibration and shock................................................................................58
7.6.1 Operating vibration.........................................................................58
7.6.2 Nonoperating vibration...................................................................58
7.6.3 Operating shock..............................................................................59
7.6.4 Nonoperating shock........................................................................59
7.6.5 Nonoperating rotational shock........................................................60
7.7 Acoustics.................................................................................................61
7.8 Identification labels.................................................................................61
7.9 Safety ......................................................................................................62
7.9.1 UL and CSA standard conformity ..................................................62
7.9.2 German safety mark........................................................................62
7.9.3 Flammability...................................................................................62

Deskstar 7K400 Hard Disk Drive Specification
7.9.4 Safe handling ..................................................................................62
7.9.5 Environment....................................................................................62
7.9.6 Secondary circuit protection...........................................................62
7.10 Electromagnetic compatibility..............................................................63
7.10.1 CE mark........................................................................................63
7.10.2 C-TICK mark................................................................................63
7.10.3 BSMI mark ...................................................................................63
7.11 Packaging..............................................................................................63
8.0 General..............................................................................................................65
8.1 Introduction.............................................................................................65
8.2 Terminology............................................................................................65
8.3 Deviations from standard........................................................................65
9.0 Registers............................................................................................................67
9.1 Register set..............................................................................................67
9.2 Alternate Status Register ........................................................................68
9.3 Command Register .................................................................................68
9.4 Cylinder High Register...........................................................................68
9.5 Cylinder Low Register............................................................................68
9.6 Data Register...........................................................................................69
9.7 Device Control Register.........................................................................69
9.8 Drive Address Register...........................................................................70
9.9 Device/Head Register .............................................................................70
9.10 Error Register........................................................................................71
9.11 Features Register...................................................................................71
9.12 Sector Count Register...........................................................................71
9.13 Sector Number Register........................................................................72
9.14 Status Register ......................................................................................72
10.0 General operation..........................................................................................75
10.1 Reset response.......................................................................................75
10.2 Register initialization............................................................................76
10.3 Diagnostic and Reset considerations ....................................................77
10.4 Sector Addressing Mode.......................................................................78
10.4.1 Logical CHS addressing mode .....................................................78
10.4.2 LBA addressing mode ..................................................................78
10.5 Overlapped and queued feature ............................................................78
10.6 Power management features.................................................................80
10.6.1 Power mode ..................................................................................80
10.6.2 Power management commands ....................................................80
10.6.3 Standby timer................................................................................80
10.6.4 Interface capability for power modes ...........................................81
10.7 S.M.A.R.T. Function ............................................................................82
10.7.1 Attributes ......................................................................................82
10.7.2 Attribute values.............................................................................82
10.7.3 Attribute thresholds.......................................................................82
10.7.4 Threshold exceeded condition ......................................................82
10.7.5 S.M.A.R.T. commands .................................................................82

Deskstar 7K400 Hard Disk Drive Specification
10.7.6 Off-line read scanning ..................................................................82
10.7.7 Error log........................................................................................83
10.7.8 Self-test.........................................................................................83
10.8 Security Mode Feature Set....................................................................84
10.8.1 Security mode ...............................................................................84
10.8.2 Security level ................................................................................84
10.8.3 Passwords......................................................................................85
10.8.4 Operation example........................................................................85
10.8.5 Command table.............................................................................88
10.9 Host Protected Area Feature.................................................................89
10.9.1 Example for operation (In LBA Mode)........................................89
10.9.2 Security extensions .......................................................................90
10.10 Seek overlap........................................................................................91
10.11 Write cache function...........................................................................92
10.12 Reassign function................................................................................93
10.12.1 Auto Reassign function...............................................................93
10.13 Power-Up in Standby feature set ........................................................94
10.14 Advanced Power Management feature set (APM) .............................95
10.15 Automatic Acoustic Management feature set (AAM)........................96
10.16 Address Offset Feature .......................................................................97
10.16.1 Enable/Disable Address Offset Mode.........................................98
10.16.2 Identify Device Data...................................................................98
10.16.3 Exceptions in Address Offset Mode..........................................98
10.17 48-bit Address Feature Set..................................................................99
10.18 Streaming Feature Set.........................................................................99
10.18.1 Streaming commands..................................................................100
10.18.2 Urgent bit....................................................................................100
10.18.3 Flush to Disk bit..........................................................................100
10.18.4 Not Sequential bit .......................................................................100
10.18.5 Read Continuous bit....................................................................101
10.18.6 Write Continuous bit...................................................................101
10.18.7 Handle Streaming Error bit.........................................................101
10.18.8 Streaming Logs...........................................................................101
11.0 Command protocol ........................................................................................103
11.1 PIO Data In commands.........................................................................103
11.2 PIO Data Out Commands .....................................................................104
11.3 Non-data commands ............................................................................105
11.4 DMA commands...................................................................................107
11.5 DMA queued commands ......................................................................108
12.0 Command descriptions..................................................................................109
12.1 Check Power Mode (E5h/98h) .............................................................113
12.2 Configure Stream (51h) ........................................................................114
12.3 Device Configuration Overlay (B1h) ...................................................116
12.3.1 DEVICE CONFIGURATION RESTORE (Subcommand C0h).116
12.3.2 DEVICE CONFIGURATION FREEZE LOCK (Subcommand C1h)116
12.3.3 DEVICE CONFIGURATION IDENTIFY (Subcommand C2h) 117

Deskstar 7K400 Hard Disk Drive Specification
12.3.4 DEVICE CONFIGURATION SET (Subcommand C3h) ............117
12.4 Download Microcode (92h)..................................................................120
12.5 Execute Device Diagnostic (90h) .........................................................121
12.6 Flush Cache (E7h) ................................................................................122
12.7 Flush Cache Ext (EAh).........................................................................123
12.8 Format Track (50h)...............................................................................124
12.9 Format Unit (F7h).................................................................................125
12.10 Identify Device (ECh).........................................................................126
12.11 Idle (E3h/97h)....................................................................................137
12.12 Idle Immediate (E1h/95h)...................................................................138
12.13 Initialize Device Parameters (91h) .....................................................139
12.14 NOP (00h)...........................................................................................140
12.15 Read Buffer (E4h)...............................................................................141
12.16 Read DMA (C8h/C9h)........................................................................142
12.17 Read DMA Ext (25h)..........................................................................144
12.18 Read DMA Queued (C7h)..................................................................146
12.19 Read DMA Queued Ext (26h) ............................................................148
12.20 Read Log Ext (2Fh) ............................................................................150
12.20.1 General Purpose Log Directory..................................................152
12.20.2 Extended Comprehensive SMART Error Log............................153
12.20.3 Extended Self-test log sector ......................................................155
12.20.4 Read Stream Error log ................................................................156
12.20.5 Write Stream Error log ...............................................................157
12.20.6 Streaming Performance log ........................................................158
12.21 Read Long (22h/23h)..........................................................................160
12.22 Read Multiple (C4h)...........................................................................162
12.23 Read Multiple Ext (29h) .....................................................................164
12.24 Read Native Max ADDRESS (F8h)...................................................166
12.25 Read Native Max Address Ext (27h)..................................................167
12.26 Read Sectors (20h/21h).......................................................................168
12.27 Read Sector(s) Ext (24h).....................................................................170
12.28 Read Stream DMA (2Ah)...................................................................172
12.29 Read Stream PIO (2Bh)......................................................................175
12.30 Read Verify Sectors (40h/41h) ...........................................................178
12.31 Read Verify Sector(s) (42h)................................................................180
12.32 Recalibrate (1xh).................................................................................182
12.33 Security Disable Password (F6h)........................................................183
12.34 Security Disable Password (F3h)........................................................184
12.35 Security Erase Unit (F4h) ...................................................................185
12.36 Security Freeze Lock (F5h) ................................................................187
12.37 Security Set Password (F1h)...............................................................188
12.38 Security Unlock (F2h) ........................................................................190
12.39 Seek (7xh)..........................................................................................191
12.40 Service (A2h .......................................................................................)192
12.41 Set Features (EFh) ..............................................................................193
12.41.1 Set Transfer mode.......................................................................194

Deskstar 7K400 Hard Disk Drive Specification
12.41.2 Write Cache ................................................................................194
12.41.3 Advanced Power Management...................................................194
12.41.4 Automatic Acoustic Management ..............................................195
12.41.5 Set Maximum Host Interface Sector Time .................................196
12.42 Set Max ADDRESS (F9h)..................................................................197
12.42.1 Set Max Set Password (Feature=01h).........................................199
12.42.2 Set Max Lock (Feature=02h)......................................................200
12.42.3 Set Max Unlock (Feature = 03h) ................................................201
12.42.4 Set Max Freeze Lock (Feature = 04h) ........................................202
12.43 Set Max Address Ext (37h).................................................................203
12.44 Set Multiple (C6h) ..............................................................................205
12.45 Sleep (E6h/99h) ..................................................................................206
12.46 S.M.A.R.T. Function Set (B0h)..........................................................207
12.46.1 S.M.A.R.T. Function Subcommands.........................................207
12.46.2 Device Attribute Data Structure .................................................211
12.46.3 Device Attribute Thresholds data structure ................................214
12.46.4 S.M.A.R.T. Log Directory..........................................................216
12.46.5 S.M.A.R.T. summary error log sector ........................................216
12.46.6 Self-test log data structure .........................................................218
12.46.7 Selective self-test log data structure ...........................................219
12.46.8 Error reporting ............................................................................220
12.47 Standby (E2h/96h)..............................................................................221
12.48 Standby Immediate (E0h/94h)............................................................222
12.49 Write Buffer (E8h)..............................................................................223
12.50 Write DMA (CAh/CBh) .....................................................................224
12.51 Write DMA Ext (35h).........................................................................226
12.52 Write DMA Queued (CCh).................................................................228
12.53 Write DMA Queued Ext (36h) ...........................................................230
12.54 Write Log Ext (3Fh) ...........................................................................232
12.55 Write Long (32h/33h).........................................................................233
12.56 Write Multiple (C5h) ..........................................................................235
12.57 Write Multiple Ext (39h) ....................................................................237
12.58 Write Sectors (30h/31h)......................................................................239
12.59 Write Sector(s) (34h) ..........................................................................241
12.60 Write Stream DMA (3Ah)..................................................................243
12.61 Write Stream PIO (3Bh) .....................................................................246
13.0 Time-out values..............................................................................................249

7K400 Hard Disk Drive Specification
List of Tables
Table 1. Formatted capacity...........................................................................11
Table 2. Mechanical positioning performance ..............................................12
Table 3. World Wide Name Assignment.......................................................12
Table 4. Cylinder allocation...........................................................................13
Table 5. Command overhead.........................................................................14
Table 6. Mechanical positioning performance ..............................................15
Table 7. Full stroke seek time........................................................................15
Table 8. Single Track Seek Time...................................................................16
Table 9. Latency Time...................................................................................16
Table 10. Drive ready time ............................................................................16
Table 11. Data transfer speed ........................................................................17
Table 12. Simple Sequential Access performance.........................................18
Table 13. Random Access performance ........................................................18
Table 14. Description of operating modes.....................................................19
Table 15. Mode transition times ....................................................................19
Table 16. Plist physical format ......................................................................21
Table 17. Signal definitions...........................................................................25
Table 18. Special signal definitions for Ultra DMA......................................26
Table 19. Interface connector pins and I/O signals........................................29
Table 20. The timing of COMRESET, COMINT and COMWAKE ............30
Table 21. Parameter descriptions...................................................................30
Table 22. System reset timing chart...............................................................31
Table 23. PIO cycle timings chart .................................................................32
Table 24. Multiword DMA cycle timing chart..............................................34
Table 25. Multiword DMA cycle timings .....................................................34
Table 26. Ultra DMA cycle timing chart (Initiating Read) ...........................35
Table 27. Ultra DMA cycle timings (Initiating Read)...................................35
Table 28. Ultra DMA cycle timing chart (Host pausing Read).....................36
Table 29. Ultra DMA cycle timings (Host pausing Read) ............................36
Table 30. Ultra DMA cycle timing chart (Host terminating Read)...............37
Table 31. Ultra DMA cycle timings (Host terminating Read) ......................37
Table 32. Ultra DMA cycle timing chart (Device terminating Read) ...........38
Table 33. Ultra DMA cycle timings (Device Terminating Read) .................38
Table 34. Ultra DMA cycle timing chart (Initiating Write) ..........................39
Table 35. Ultra DMA cycle timings (Initiating Write)..................................39
Table 36. Ultra DMA cycle timing chart (Device Pausing Write)................40
Table 37. Ultra DMA cycle timing chart (Device Pausing Write)................40
Table 38. Ultra DMA cycle timing chart (Device Terminating Write).........41
Table 39. Ultra DMA cycle timings (Device terminating Write)..................41
Table 40. Ultra DMA cycle timing chart (Host Terminating Write).............42
Table 41. Ultra DMA cycle timings (Host Terminating Write) ....................42
Table 42. I/O address map.............................................................................43
Table 43. Jumper positions for capacity clip to 2GB/32GB..........................48

7K400 Hard Disk Drive Specification
Table 44. Jumper settings for Disabling Auto Spin.......................................48
Table 45. Temperature and humidity.............................................................50
Table 46. Limits of temperature and humidity ..............................................50
Table 47. Input voltage..................................................................................51
Table 48. Power supply current of PATA model ..........................................51
Table 49. Power supply current of SATA model ..........................................52
Table 50. Power supply generated ripple at drive power connector..............52
Table 51. Random vibration PSD..................................................................58
Table 52. Random vibration PSD profile break points (operating)...............58
Table 53. Random Vibration PSD profile breakpoints (nonoperating).........58
Table 54. Sinusoidal shock wave...................................................................60
Table 55. Rotational shock ..........................................................................60
Table 56. Sound power levels........................................................................61
Table 57. Sound power levels........................................................................61
Table 58. Register Set....................................................................................67
Table 59. Alternate Status Register ...............................................................68
Table 60. Device Control Register ................................................................69
Table 61. Drive Address Register..................................................................70
Table 62. Device Head/Register....................................................................70
Table 63. Error Register.................................................................................71
Table 64. Status Register ...............................................................................72
Table 65. Reset response table.......................................................................75
Table 66. Default Register Values.................................................................76
Table 67. Diagnostic codes............................................................................76
Table 68. Reset error register values .............................................................77
Table 69. Power conditions ...........................................................................81
Table 70. Command table for device lock operation.....................................88
Table 71. Seek overlap...................................................................................91
Table 72. Enable/Disable Address Offset Mode ...........................................98
Table 73. Command Set (1 of 2)....................................................................109
Table 74. Command Set (2 of 2)....................................................................110
Table 75. Command Set (subcommand)........................................................111
Table 76. Check Power Mode command (E5h/98h)......................................113
Table 77. Configure Stream Command (51h) ...............................................114
Table 78. Check Power Mode Command (E5h/98h).....................................116
Table 79. Device Configuration Overlay Features register values................116
Table 80. Device Configuration Overlay Data structure...............................118
Table 81. DCO error information definition..................................................119
Table 82. Download Microcode Command (92h).........................................120
Table 83. Execute Device Diagnostic command (90h) .................................121
Table 84. Flush Cache command (E7h).........................................................122
Table 85. Flush Cache Ext Command (EAh) ................................................123
Table 86. Format Track command (50h).......................................................124
Table 87. Format Unit command (F7h).........................................................125
Table 88. Identify Device command (ECh)...................................................126
Table 89. Identify device information (Part 1 of 7).......................................127

7K400 Hard Disk Drive Specification
Table 90. Identify device information (Part 2 of 7)......................................128
Table 91. Identify device information (Part 3 of 7).......................................129
Table 92. Identify device information (Part 4 of 7).......................................130
Table 93. Identify device information (Part 5 of 7 ........................................132
Table 94. Identify device information (Part 6 of 7).......................................134
Table 95. Identify device information (Part 7 of 7).......................................136
Table 96. Idle command (E3h/97h)...............................................................137
Table 97. Idle Immediate command (E1h/95h).............................................138
Table 98. Initialize Device Parameters command (91h)................................139
Table 99. NOP Command (00h)....................................................................140
Table 100. Read Buffer (E4h)........................................................................141
Table 101. Read DMA command (C8h/C9h)................................................142
Table 102. Read DMA Ext Command (25h).................................................144
Table 103. Read DMA command (C8h/C9h)................................................146
Table 104. Read DMA Ext Command (25h).................................................148
Table 105. Read Log Ext Command (2Fh)....................................................150
Table 106. Log Address Definition ...............................................................151
Table 107. General Purpose Log Directory...................................................152
Table 108. Extended Comprehensive SMART Error Log ............................153
Table 109. Extended Error log data structure................................................153
Table 110. Command data structure..............................................................154
Table 111. Error data structure ......................................................................154
Table 112. Extended Self-test log descriptor entry........................................156
Table 113. Read Stream Error Log................................................................156
Table 114. Stream Error Log entry................................................................157
Table 115. Write Stream Error Log...............................................................158
Table 116. Streaming Performance Parameters log.......................................158
Table 117. Sector Time Array Entry (Linearly Interpolated)........................159
Table 118. Position Array Entry (Linearly Interpolated) ..............................159
Table 119. Access Time Array Entry (Linearly Interpolated).......................159
Table 120. Read Long (22h/23h)...................................................................160
Table 121. Read Multiple (C4h)....................................................................162
Table 122. Read DMA Ext Command (25h).................................................164
Table 123. Read Native Max ADDRESS (F8h)............................................166
Table 124. Read Native Max Address Ext command (27h)..........................167
Table 125. Read Sectors Command (20h/21h)..............................................168
Table 126. Read Sector(s) Ext command (24h)............................................170
Table 127. Read Stream DMA Command (2Ah) ..........................................172
Table 128. Read Stream PIO Command (2Bh) .............................................175
Table 129. Read Verify Sectors (40h/41h)....................................................178
Table 130. Read Verify Sector(s) command (42h)........................................180
Table 131. Recalibrate (1xh) .........................................................................182
Table 132. Security Disable Password (F6h).................................................183
Table 133. Password Information for Security Disable Password command183
Table 134. Security Disable Password (F3h).................................................184
Table 135. Security Erase Unit (F4h)............................................................185

7K400 Hard Disk Drive Specification
Table 136. Erase Unit information ................................................................185
Table 137. Security Freeze Lock command (F5h) ........................................187
Table 138. Security Set Password command (F1h).......................................188
Table 139. Security Set Password Information .............................................188
Table 140. Security Unlock command (F2h).................................................190
Table 141. Seek command (7xh)...................................................................191
Table 142. Service command (A2h)..............................................................192
Table 143. Set Features command (EFh).......................................................193
Table 144. Set Max ADDRESS command (F9h)..........................................197
Table 145. Set Max Set Password command.................................................199
Table 146. Set Max Set Password data contents ...........................................199
Table 147. Set Max Lock command..............................................................200
Table 148. Set Max Unlock command (F9h) ................................................201
Table 149. Set Max Freeze Lock (F9h).........................................................202
Table 150. Set Max Address Ext command (37h).........................................203
Table 151. Set Multiple command (C6h) ......................................................205
Table 152. Sleep command (E6h/99h) ..........................................................206
Table 153. S.M.A.R.T. Function Set command (B0h)..................................207
Table 154. Device Attribute Data Structure ..................................................211
Table 155. Individual Attribute Data Structure .............................................211
Table 156. Device Attribute Thresholds Data Structure................................215
Table 157. Individual Threshold Data Structure ...........................................215
Table 158. S.M.A.R.T. Log Directory...........................................................216
Table 159. S.M.A.R.T. summary error log sector .......................................216
Table 160. Error log data structure...............................................................217
Table 161. Command data structure..............................................................217
Table 162. Error data structure ......................................................................217
Table 163. Self-test log data structure ...........................................................218
Table 164. Selective self-test log data structure ............................................219
Table 165. S.M.A.R.T. Error Codes..............................................................220
Table 166. Standby (E2h/96h).......................................................................221
Table 167. Standby Immediate (E0h/94h).....................................................222
Table 168. Write Buffer (E8h).......................................................................223
Table 169. Write DMA (CAh/CBh) ..............................................................224
Table 170. Write DMA Ext Command (35h)...............................................226
Table 171. Write DMA Queued Command CAh/CBh) ................................228
Table 172. Write DMA Queued Ext Command (36h)..................................230
Table 173. Write Log Ext Command (3Fh)..................................................232
Table 174. Write Long (32h/33h)..................................................................233
Table 175. Write Multiple (C5h)...................................................................235
Table 176. Write Log Ext Command (3Fh)..................................................237
Table 177. Write Sectors command (30h/31h)..............................................239
Table 178. Write Sector(s) Command (34h) ................................................241
Table 179. Write Stream DMA Command (3Ah) .........................................243
Table 180. Write Stream PIO Command (3Bh) ............................................246

Deskstar 7K400 Hard Disk Drive Specification
1
1.0 General
1.1 Introduction
This document describes the specifications of the Deskstar 7K400, a 3.5-inch, 7200-rpm hard disk drive with the
following model numbers:
• HDS724040KLAT80 / HDS724040KLSA80 (400 GB)
These specifications are subject to change without notice.
1.2 References
• Information Technology - AT Attachment with Packet Interface-7.
1.3 Abbreviations
Abbreviation Meaning
AAmpere
AC alternating current
AT Advanced Technology
ATA Advanced Technology Attachment
BIOS Basic Input/Output System
C Celsius
CSA Canadian Standards Association
C-UL Canadian-Underwriters Laboratory
Cyl cylinder
DC Direct Current
DFT Drive Fitness Test
DMA Direct Memory Access
ECC error correction code
EEC European Economic Community
EMC electromagnetic compatibility
ERP Error Recovery Procedure
ESD Electrostatic Discharge
FCC Federal Communications Commission
FRU field replacement unit
G gravity (a unit of force)
G
2
/Hz (32 ft/sec)
2
per Hertz
Gb 1,000,000,000 bits

Deskstar 7K400 Hard Disk Drive Specification
2
GB 1,000,000,000 bytes
GND ground
h hexadecimal
HDD hard disk drive
Hz Hertz
I Input
ILS integrated lead suspension
I/O Input/Output
ISO International Standards Organization
KB 1,000 bytes
Kbpi 1000 bits per inch
kgf-cm kilogram (force)-centimeter
KHz kilohertz
LBA logical block addressing
Lw unit of A-weighted sound power
mmeter
max maximum
MB 1,000,000 bytes
Mbps 1,000,000 bits per second
MHz megahertz
MLC Machine Level Control
mm millimeter
ms millisecond
us, ms microsecond
OOutput
OD Open Drain Programmed Input/Output
POH power on hours
Pop population
P/N part number
p-p peak-to-peak
PSD power spectral density
RES radiated electromagnetic susceptibility
RFI radio frequency interference
RH relative humidity
RMS root mean square
RPM revolutions per minute

Deskstar 7K400 Hard Disk Drive Specification
3
RST reset
R/W read/write
sec second
SELV secondary low voltage
S.M.A.R.TSelf-Monitoring, Analysis, and Reporting Technology
TPI tracks per inch
Trk track
TTL transistor-transistor logic
UL Underwriters Laboratory
Vvolt
VDE Verband Deutscher Electrotechniker
Wwatt
3-state transistor-transistor tristate logic
1.4 Caution
• Do not apply force to the top cover.
• Do not cover the breathing hole on the top cover.
• Do not touch the interface connector pins or the surface of the printed circuit board
• This drive can be damaged by electrostatic discharge (ESD). Any damages incurred to the drive after its
removal from the shipping package and the ESD protective bag are the responsibility of the user.

Deskstar 7K400 Hard Disk Drive Specification
4

Deskstar 7K400 Hard Disk Drive specification
5
2.0 General features of the drive
• Formatted capacities of 400 GB
• Spindle speeds of 7200 RPM
• Fluid Dynamic Bearing motor
• Enhanced IDE interface / Serial ATA interface
• Sector format of 512 bytes/sector
• Closed-loop actuator servo
• Load/Unload mechanism, non head disk contact start/stop
• Automatic Actuator lock
• Interleave factor 1:1
• Seek time of 8.5 ms in Read Operation 9.2ms Write Operation typical (without Command Overhead)
• Sector Buffer size 8192 KB (Upper 271 KB is used for firmware)
• Ring buffer implementation
• Write Cache
• Queued feature support
• Advanced ECC On The Fly (EOF)
• Automatic Error Recovery procedures for read and write commands
• Self Diagnostics on Power on and resident diagnostics
• PIO Register/Data Transfer Mode 4 (16.6 MB/s)
• DMA Data Transfer
• Multiword mode Mode 2 (16.6 MB/s)
• Ultra DMA Mode 6 (133 MB/s)
• Serial ATA Data Transfer1.5Gbps
• CHS and LBA mode
• Power saving modes/Low RPM idle mode (APM)
• S.M.A.R.T. (Self Monitoring and Analysis Reporting Technology)
• Support security feature
• Quiet Seek mode (AAM)
• 48-bit addressing feature
• Adaptive BPI
• RVS (Rotational Vibration Safeguard)
• ATA - 7 compliant
• UDMA 133 support
• Streaming feature set support
• World Wide Name

Deskstar 7K400 Hard Disk Drive Specification
6