Hitron CODA-4589 Manual

11
Internet: Gateway Instruction Guide
READY-SET-INSTALL
KIT
Hitron CODA4589

22
What’s Inside?
Removing Your Equipment.............................................. 3
Gateway Installation......................................................6
Gateway Activation ......................................................8
Phone Installation.........................................................10
Thanks for Choosing
Atlantic Broadband
In this guide, we will walk you through how to set up your new
internet gateway from Atlantic Broadband. This all-in-one device
allows you to utilize both wired and wireless (WiFi) devices in
your home.
Current Customers: If you need to replace your current equipment,
start with the “Removing Your Equipment”section.
New Customers: To set up your gateway, start with the
“Gateway Installation” section.
We hope you enjoy your internet service from Atlantic Broadband.

33
Before You Begin
REMOVING YOUR EQUIPMENT
IMPORTANT
STEP!
DO YOU HAVE YOUR PHONE SERVICE WITH ATLANTIC BROADBAND?
If you are an Atlantic Broadband phone customer, you must call us at 1-888-674-4738
before disconnecting your phone modem. An agent will need to assist you in swapping
your equipment to avoid an interruption to your phone service. If you don’t receive phone
service from Atlantic Broadband, you may proceed with these instructions.
If you have wireless devices connected to your current WiFi network, write down the wireless network
name and password so that you can continue to use it after replacing your current modem. If you don’t
have the current wireless network name or password, you can create a new one later.
1.
How To Remove Your Current Equipment

44
REMOVING YOUR EQUIPMENT
How To Remove Your Current Equipment (continued)
PLEASE NOTE:
Your new internet gateway has a built-in WiFi router, so you will not need to re-connect a standalone
router, if you had one previously connected.
Disconnect the coaxial cable line from the back of the wireless modem . Do not disconnect the
other end of the coaxial cable line from the wall or from any splitters.
3.
14
Modem IN
CABLE
Coaxial Cable
Power Cord Power to
Wall Outlet
Coaxial Cable to Cable Wall Plate
Optional Wired Devices
Ethernet Cord
Unplug your current modem from its power source. See diagram below.
2.

55
REMOVING YOUR EQUIPMENT
Please proceed to the “Gateway Installation” section.
7.
5. ATTENTION PHONE CUSTOMERS: If you are an Atlantic Broadband
phone customer, you also will need to disconnect the phone lines from the
back of the phone modem. If you have more than one phone line, note
which line was in port 1, and which was in port 2.
IMPORTANT
STEP!
Disconnect any Ethernet cord(s) from the current modem that are connected to any computers
or other devices . Do not disconnect the other end of the Ethernet cord(s) from any connected
computers or gaming devices.
4.
DO YOU NEED TO RETURN YOUR EQUIPMENT? When you placed your order, you should
have been directed to return or recycle your old equipment. Unless specically told to return it
to Atlantic Broadband, please bring your old equipment to an electronics recycling center for
disposal. Once deactivated, your old modem will no longer work.
6.
NOTE: If instructed to return your equipment to Atlantic Broadband and you fail to do so, a
fee may be charged to your account.

66
GATEWAY INSTALLATION
Getting Your Gateway Connected
Follow these easy instructions to set up your internet service.
DIFFICULTY:
Easy
TIME TO COMPLETE:
15 Minutes
NOTE: If you have ordered Atlantic Broadband home phone service, you will also need a cord,
which will be included. Please refer to page 10 for phone instructions.
WHAT YOU’LL NEED:
Gateway Coaxial CableEthernet Cord Power Cord

77
How To Set Up Your Gateway
Follow these easy steps to connect your new gateway, the all-in-one device that allows you
to utilize both wired and wireless (WiFi) devices.
Power Cord
Coaxial Cable
Ethernet Cord
Phone Cord
NOTE: If you’re connecting Atlantic Broadband phone service, use the phone cord to connect your phone to the gateway .
Locate cable wall outlet (coaxial) in a
central location. It will look like this:
1.
Connect coaxial cable from the wall to gateway
(insert into connector and turn barrel to tighten).
2.
Connect power cord from gateway to the wall
outlet . The gateway will update once powered
on, which could last around 10 minutes. Once
lights are glowing steady, it’s ready to use.
3.
If you’re connecting a wired device, use the
Ethernet cord provided to connect the gateway
to the back of the device .
4.
GATEWAY INSTALLATION

88
GATEWAY ACTIVATION
Steps To Activate Your Gateway
Look for the sticker on the back of the gateway
(as shown on the right) and locate the default
WiFi network name and password.
1.
Go to “Settings” on your wireless device, locate the default network name in the list of
wireless networks and select it. When prompted, input the default password.
2.
Open up an internet browser and you will see
this page (as shown on the right):
Click “Let’s Go.” If it does not load after opening
your browser, go to http://192.168.0.1
3.

99
GATEWAY ACTIVATION
On the “WiFi Setup” tab, create a new WiFi Network name and password, then click
“Conrm Setup.” Please note your new network name/password and click “Complete My Setup.”
4.
Connect all wireless devices (smart TVs, phones, laptops, tablets, smart home devices, etc.)
using the new network name and password.
5.
Having Trouble?
Troubleshooting: Visit atlanticbb.com/GatewayInstall to check out
online resources including FAQs and set up videos, or call 1-844-579-0697
for assistance.

1010
PHONE INSTALLATION
Getting Your Phone Service Connected
Follow these easy instructions to set up your phone service.
WHAT YOU’LL NEED:
GatewayPhone Phone Cord
DIFFICULTY:
Easy
TIME TO COMPLETE:
5 Minutes

1111
PHONE INSTALLATION
How To Set Up Your Phone
After connecting the gateway, follow these steps to connect your phone line.
To get started you will need a phone and a phone cord.
You should now hear a dial tone.
2.
From this phone, call the activation line at
1-888-674-4738 to complete the set up of your
phone line and features. The activation team will
assist you with connecting any additional phones.
3.
Connect the phone cord from your phone into
phone port #1 on the back of the gateway .
1.
Phone Cord
Phone Cord
NOTE: For this activation step, do not connect the gateway phone port to any phone jacks in your home.

1212
We hope you enjoy your
internet service. If you have
any questions, we’re here to
help you answer them 24-hours
a day, 7 days a week.
Need additional support? Please visit
atlanticbb.com/GatewayInstall to
check out online resources including FAQs
and set up videos, or call 1-844-579-0697
for assistance.
Thank you again for choosing
Atlantic Broadband!
GatewayHGuide0720