HME HM-420L User manual

1
HM-420L/820L/2116L HD-DVR
Digital Video Recorder Instructions
~ Directory~
Chapter 1 Hard Disk Installation (Standard shipping products not include hard
disk) ………………………………………………………………………………...4-6
Chapter 2 Panel Appearance ……………….………………………………………7
2-1 Front Panel Controls ……………………………………………………………7
2-2 Rear Panel Connectors ……………………………………………………….....8
Chapter 3 Live, Playback Operations ………………………………………….…..9
3-1 Remote Control Instructions in LIVE Mode …………………………………..9
3-2 Operating Instructions of Right-Click Mouse Icon in Rapid Functional in
LIVE Mode; Table 3-2-1, Table 3-2-2, Table 3-2-3, Table 3-2-4, Table 3-2-5, Ta-
ble 3-2-6 Table 3-2-7 Table 3-2-8……………………………………..………..10-16
Chapter 4 The Main Menu Setup ………………………………………………....17
4-1Camera Setup ……………………………….…………………………………..18
4-2 Event Setup ……………………………….…………………………………….19
4-2-1Motion Setup ………………………………………………………………..20

2
4-2-2 Sensor Setup ………….………………………………………………………21
4-3 Recording Setup ………………………………………………………………..22
4-3-1Sequence Setup …………….…………………………………………………23
4-3-2 Video Quality and Frame Rate Setup ………………………………………24
4-4 Alarm Setup …………………………………………………………………..25
4-5 Hard Disk Management Setup ………………………………………………..26
4-5-1HDD Information …….………………………………………………………27
4-6 Networking Setup ………………………………………………………………28
4-6-1 Networking Connection ……………………………………………………..29
4-6-1-1 Local Area Network ……………………………………………………….29
4-6-1-2 DHCP ……………………………………………………………………….30
4-6-1-3 PPPoE ………………………………………………………………………31
4-6-1-4 3G …………………………………………………………………………...32
4-6-2 Advanced Setup ……………………………………………………………...33
4-6-3 HTTP Setup …………………………………………………………………..34
4-6-4 DDNS Setup …………………………………………………………………..35
4-6-5 EMAIL Setup ………………………………………………………………...36
4-6-6 VPN Setup ……………………………………………………………………37
4-6-7 FTP Setup …………………………………………………………………….38
4-6-8 SMS Setup ……………………………………………………………………39
4-6-9 Push Notification Setup ……………………………………………………...40
4-7 Data Backup and System Tools ……………………………………………….41
4-8 System Setup ……………………………………………………………………42
4-8-1 Display Setup …………………………………………………………………43
4-8-2 Time/ Date Setup …………………………………………………………….44
4-8-2-1 Change Date/ Time Setup …………………………………………………45
4-8-2-2 Daylight saving Time Setup ……………………………………………..45
4-8-2-3 Internet Time Setup ……………………………………………………..46
4-8-3 User Account Setup ………………………………………………………..47
4-8-3-1 Permission Setup ………………………………………………………...48
4-8-3-2 Control Relay Setup ……………………………………………………….49
4-8-3-2-1 Relay Timer Setup ……………………………………………………....49
4-8-4 Device Setup ………………………………………………………………….50

3
4-9 EXIT Mani Menu Options …………………………………………………….50
Chapter 5 Backup and Playback Search ………………………………………….51
5-1 Backup Setup ……………………………………………………………….51-52
5-1-1 DVF Player Usage ……………………………………………..................53-54
5-2 Playback Search Setup ………………………………………………………...55
5-2-1 Time Search …………………………………………………………………..56
Chapter6 Network Remote Control ………………………………………………57
6-1 Application Software Installation and Setup ……………………………..57-59
6-2 Do Remote Monitoring through IE …………………………….................60-61
6-3 Do Remote Monitoring through LIVE JPEG (Monitor Function only) ..62-64
6-4 Application Software and IE Operation ……………………………………...65
Chapter7 Remote Connection of Mobile Application and DVR ………………...66
7-1 Mobile Software and Operation with DVR Networking (iPhone Software In-
stallation and Operation & AquilaDVR Software Installation)……………..66-71
7-2 Mobile Software and Operation with DVR Networking (Google Android
Phone Software Installation & Operation) ……………………………………72-77

4
Chapter 1 Hard Disk Installation
( Standard shipping products not include hard disk)
Step 1 : Remove the three screws in rear case, as the following figure at circle
marked. (420L /820L /2116L)
Step 2 : Remove a screw in the right case, as the following figure at circle
marked.
Step 3 : Remove a screw in the left case, as the following figure at circle marked.

5
Step 4 : Open the chassis cover along the direction of the arrow (upward)
Step 5 : Put Hard Disk on the Hard Disk plate and fix it with four screws as the
picture indicated. Connect SATA& Power wire to Hard Disk.

6
Step 6 : Put the cover back and fix it with 5 screws as Step 1-3 indicated.
Note: After installation, please initialize Hard Disk before starting to record. For
more detailed information, please check out User Manual System Tools for ref-
erence.

7
Chapter 2 Panel Appearance
2-1 Front Panel Controls
(1) IR Display
IR Enable
(2) USB Port
USB port (for USB，please use rear USB port
for mouse device)
(3) LED- Power
DVR power on
(4) REC
REC : DVR recording ( or setup schedule and
open the recording function )
(5) LED - Alarm
Alarm on alarm event, signal break and motion
detection
(6) LED- LAN
Lan is working

8
2-2 Rear Panel Connectors (420L / 820L / 2116L)
(1) Video In
BNC input port for cameras (total of 16 jacks)
(2) CVBS OUT
Video output
(3) Audio Out
Audio signals RCA output port (Corresponding CH1)
(4) Audio In
Audio signals RCA input port (1~16)
(5) VGA
VGAport
(6) HDMI
High resolution multimedia interface
(7) USB 2.0 Port
USB device port
(8) IR
IR receiving elongated holes
(9) ALARM OUT
RS485
(10) LAN
Network port
(11) DC 12V
DC 12V power jack
(12)Audio Out
Recording
Audio signals RCA output port (Recording)

9
Chapter 3 Live, Playback Operations
In LIVE mode, all of channel screens and live sounds can be monitored and
screens can be changed and operated. The following describes the real-time
monitoring mode, the operation of remote controller and mouse and screen’s
prompts
3-1 Remote Control Instructions in LIVE Mode
ICON
DESCRIPTION
REC
Start/ Stop recording
Mute
Live audio is on/off
Play
Entering play back mode
1-9
Switch to full screen displaying channels
Freeze
On/ Off screen freezing function
Menu
Enable/ Disable setup menu
PTZ
PTZ mode
Zoom
Enter/ Delete Zoom mode
The area can be moved and zoomed by arrow keys or the mouse
ESC
Enter/ Return Menu
Enter
Enter
FF
Fast forward. There are six speeds: 2x, 4X, 8X, 16X, 32X and
64X.
Stop
Stop play/ Stop play back
RF
Rewind fast. There are six speeds: 2x, 4X, 8X, 16X, 32X and 64X.
Pause
Pause
Split
Switch to split windows
Polling
Start auto channel change. Channel can be cycled change by
seconds setting and display in full screen.
PIP
On/ Off picture in picture. Switch channel by mouse clicking.
Lock
On/ Off Lock Key
Zoom in
Zoom in. Using the arrow keys to move the Zoom in area.
Zoom out
Zoom out. Using the arrow keys to move the Zoom out area.
Focus in
Focus in
Focus out
Focus out
Ctrl 1,2,3,4
On/ Off 1~4 relay
DVR 1,2,3,4
Switch DVR ID 1~4

10
3-2 Operating Instructions of Right-Click Mouse Icon in
Rapid Functional in LIVE Mode
Table 3-2-1
ICON
DESCRIPTION
Camera setup –Show, auto, channel change, PTZ control, image con-
trol, audio control
Main menu. Clicking this icon will bring up the following nine menu
icons.
Event setup - OSD motion setup, sensing device setup
Recording setup - OSD motion, sound record, video record, alarm rec-
ord, schedule record
Alarm setup –Event, time setup, image broken setup
HDD - Loop record, residual rate alarm, capacity state
Networking setup –LAN, DHCP, PPPOE, HTTP, DDNS, EMAIL,
VPN, FTPsetup
Data backup - Interface option, system event clear, system update set-
up
System setup –Name, language, VGA resolution, menu lock, display
option, user, relay setup
Leave = “ESC”
System disk information –Version, IP, MAC, HDD capacity
Zoom in/ out = “Zoom”AUX 1 ~ 8 (signal screen only)
PTZ control= “PTZ”(signal screen only)
Sound control –On/ Off live sound
= “Polling”
= “PIP”