HMN M2 El-tip User manual

USER GUIDE HEIGHT ADJUSTABLE SHOWER/COMMODE CHAIR, MODEL M2 BOXED CHAIR
INTENTED FOR USE A BATHING, SHOWERING AND TOILET VISIT.
STEP 1. ASSEMBLY OF WHEELS
LAY DOWN THE CHAIR.
TAKE THE CLIPS OUT OF THE LEG AND INSER
THE WHEELS INTO THE FRAME.
MAKE SURE THAT ALL 4 WHEELS ARE IN THE
SAME HEIGHT BEFORE INSERTING THE CLIPS.
TURN THE CHAIR OVER FOR EASIER
ASSEMBLY OF THE WHEELS.
STEP 2. ASSEMBLY OF BACK ON FRAME
ATTACH THE BACK INTO THE FRAME.
INSERT THE 4 SCREWS AND TIGHTEN WITH AN
ALLEN WRENCH.
MAKE SURE THAT ALL 4 SCREWS ARE
SECURELY TIGHTENED.
REMEMBER TO RETIGHTENING AFTER A
MONTH.
THE SCREWS SHALL BE DISCARDED AFTER
THE MOUNTING AND YOU SHALL USE THE
SCREWS TO THE NEXT MOUNTING.
Art. No. 800290
STEP 3. ASSEMBLY/DISASSEMBLT OF ARMREST
TO ATTACH OR DETACH THE ARMRESTS, HOLD
THE ARMRESTS IN A 45 DEGREE ANGLE AND
FIT IT OVER THE ARMREST HOLDER.
STEP 4. LOCKING OF WHEELS
BEFORE USE OF THE CHAIR BATHING,
SHOWERING OR LIFTING PERSONS INTO THE
CHAIR, MAKE SURE THAT ALL 4 WHEELS ARE
LOCKED.
TO LOCK THE CHAIR, PRESS DOWN THE GREY
PLATE AS SHOWN ON THE PICTURE TO THE
LEFT.
MOUNTING OF FOOTRESTS
ADJUST THE HEIGHT OF THE FOOTRESTS BY
TAKING THE CLIPS OUT, PLACING THE
FOOTRESTS IN THE WISHED POSITION AND
PUTTING THE CLIPS BACK IN.
FOOTRESTS ARE TO BE PLACED ON THE
FRONT OF THE FRAME IN THE FOOTRESTS
HOLDERS.
THE PAN/BUCKET
WHEN SLIDING THE BUCKET OF THE CHAIR, IT
IS IMPORTANT TO SLIDE IT STRAIGHT
BACKWARDS ALONG THE SEAT.
OTHERWISE IT CAN BE VERY DIFFICULT TO
GET THE BUCKET OF THE CHAIR.

WARNING
DO NOT SIT ON THE OUTER 10
CM OF THE SEAT THAT THE
CHAIR CAN TIP FORWARD.
DO NOT STAND ON THE
FOODRESTS
Art. No.: 310700/ 310701
2 Years complaint rights against manufacturing errors.
Terms of claim for frame.
HMN grants 5 years claim rights against frame break-down for all M2 Shower/commode chairs and stainless steel shower stools. The warranty applies for
production and material break downs, and can only be used if the products have been in normal use. Please note that the normal wear is not included in
the warranty.
Cleaning: The product can be cleaned with regular cleaning without non-abrasive detergent. Wash and dry the product after the cleaning. The product can
be washed up to 85° degrees in 3 minutes.
Artkl. Nr.: Spare parts
310340 Standard seat, grey
310342 Seat with extra large hole, grey
310341 Seat lid for std. seat, grey
310343 Seat lid for seat with extra large hole, grey
310065 Clip for height adjustment, long, grey
310165 Clip for height adjustment, long, Magenta
800181 Pu foam padding for straight armrest, 1 pcs. Grey
800241 Pu foam padding for curved armrest, 1 pcs. Grey
800012 Screws for fastening of pu foam padding on armrest, 2 pcs.
310076 White nylon bush for armrests
800082 Bolt for armrests
800013 White nylon bush for telescopic leg with wheel
310344 Pu foam back-rest, grey
310063 Screws for fastening of back-rest, 4pcs.
800290 Screws for assembling of frame, 4 pcs.
800244 Grey ferule for M2 with curved pushing frame, round armrest
310066 Armrest set for straight up, set with 2 pcs.
310067 Armrest set with pu foam for straight up, set with 2 pcs., Black
310064 100 mm wheel with leg on, 1 pcs.
800042 100 mm wheel with leg on, set with 4 pcs.
310073 Black plastic ferrule for flat armrests, black
800245 Grey ferrule for oval armrest
800025 Telescopic leg, 1 pcs.
This product is CE marking which means the product
complies with EU legislations and enables the free
movement of the product in the European market.
09.10.15
HMN a/s
Midtager 22, 2605 Brøndby, Denmark
Tel.: [phone] Fax. [phone] E-mail
[email protected]k
www.hmn.dk