HMN NEPTUN User manual

USERS GUIDE: WALL MOUNTED FOLDING SEAT.
Made for using when bathing/showering.
FOLDING OF SEAT:
CLEANING:
To fold the seat, you have to take the cross bar in the front of the seat and lift up.
To make cleaning easier you can click the seat on and off.
ADJUSTING THE HEIGHT:
RELEASING THE SEAT:
Adjusting the height of the leg is done with clips without the use of tools
When you use the wall mountings you can lift the wall mounted folding seat off by means of a
quick release.
1/2

ADJUSTING THE HEIGHT OF THE WALL MOUNTING:
MOUNTING THE WALL MOUNTED FOLDING SEAT:
MOUNTING OF THE WALL MOUNTED FOLDING
SEAT IN THE WALL MUST BE DONE BY A
PROFESSIONAL
(SEE MOUNTING INSTRUCTIONS)
To adjust the height on the height adjustable wall mounting you have to loosen and tighten the
two bolts on the wall mounting (Tighten well)
Regarding placement of the holes: See enclosed drawing
Article N0.: 310290, (+ Mounting - Article No.: 310291, 310292)
Max. User load 125 kg
NB! The Clip must be pushed all the way through when height adjusting.
2 year’s complaint right against manufacturing errors.
Cleaning: When disinfecting:
What can be used; Ethanol and Propanoll dissolution.
Otherwise you use ordinary obliging non-alcoholic
cleaning material. Maximum 70 degrees
Article No.:
Spare parts for wall mounted folding seat
312030
Plastic Neptun seat for wall mounted folding seat
800077
Telescope leg (1 unit with clips, ferrule, bush)
310065
Clip for height adjustment, grey
310165
Clips for height adjustment, magenta
310017
Ferrule (for telescope leg)
310021
Bush (for telescope leg)
310075
Plastic ferrule (for top of leg)
312131
Plastic ferrule (for side of wall mounted folding seat)
310254
Quick release for wall mounting
800078
Bolts for height adjusting of wall mounting
23.01.13
HMN a/s
Midtager 22, 2605 Brøndby, Denmark
Tel.: [phone] Fax. [phone]
E-mail [email protected] www.hmn.dk
2/2