Holiday Living LWP100949C User manual

R
ITEM #0329208
7 FT. PRE-LIT WHITE
IRIDESCENT TREE
MODEL #LWP100949C
Español p. 6
1
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-813-0206, 8 a.m. - 5 p.m., EST, Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date

2
1
1
PACKAGE CONTENTS
DESCRIPTIONPART QUANTITY
ATree Top 1
B Tree Middle
Tree Bottom
1
C
D
E
Tree Stand
Cord (preassembled)
1
D
E
RED LABEL
C
B
A

3
CAUTION
RISK OF FIRE
Do not replace attachment plug. It contains a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
To reduce the risk of overheating, replace burned-out lamps promptly. Use 3-volt, 0.6-watt steady
lamps and 4-volt, 0.72-watt flashing lamps only.
• Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When
products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting
(GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
• This seasonal use product is not intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
• Do not secure the wiring of product with staples or nails, or place on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring for the night, or if left unattended.
• This is an electric product--not a toy! To avoid risk or fire, burns, personal injury and electric shock,
do not play with or place where small children can reach it.
• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string.
• Do not close doors or windows on the product or extension cords as this may damage the wire
insulation.
• Do not cover the product with cloth, paper or any material not part of the product when in use.
• This product is equipped with push-in type lamps. Do not twist lamps.
• This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from the outlet. Also unplug any additio nal strings or
products that may be attached to the product. Replace the fuse as per the us er servicing instructions
(follow product marking for proper fuse rating) and check the product. If the replacement fuse blows,
a short-circuit may be present and the product should be discarded.
• Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble the
product.
Estimated Assembly Time: 5 minutes.
No Tools Required for Assembly.
SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the
product.

4
2. Remove protective cap from tree middle (B). Insert tree
middle (B) into tree bottom (C).
NOTE: Make certain the tab fits into the slot in the tree trunk.
3. Insert tree top (A) into the top hole of the tree middle (B).
NOTE: Make certain the tab fits into the slot in the tree trunk.
4. Shape and shift tree branches to fill in any gaps.
5. Connect the plug(s) securely to the extension cord(s)
and plug the cord (E) into a wall outlet.
ASSEMBLY INSTRUCTIONS
1. Remove protective cap from tree bottom (C). Insert tree
bottom (C) into tree stand (D).
NOTE: Make certain the tab fits into the slot in the tree trunk.
1
2
3
B
A
C
B
D
E
E
E
C

5
1. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or
frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections,
or exposed copper wire.
2. When storing the product, carefully remove the product from wherever it is placed, including trees,
branches, or bushes, to avoid any undue strain or stress on the product conductors, connections
and wires.
3. When not in use, store neatly in a cool, dry location protected from sunlight.
CARE, USE AND MAINTENANCE
TROUBLESHOOTING
• If you find a section does not light, starting with the first unlit bulb, gently push (don’t twist) each bulb
firmly into the socket, and at the same time, look and feel for a broken bulb in the socket or an empty
socket where a bulb has fallen out.
• If the bulb is broken, mark it with a piece of tape and unplug the tree before removing the bulb socket
and any fragments. Replace the broken bulb. Should a light flicker while doing this, you have probably
found the faulty bulb. Replace with a new bulb.
• If a bulb just burns out, the remaining bulbs will stay lit; however, it is best to replace any burned out
bulbs as soon as you find them.
REPLACEMENT PARTS LIST
PART DESCRIPTION PART#
A
B
C
A
C
B
Fuse
Bulb
Flashing Bulb
Fuse Bulb
B
Flashing Bulb
C
A
1. Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
2. Lift up to unsnap locking tab; then pull lamp and plastic base straight
out of lamp holder.
3. Replace lamps with 3-volt, 0.6-watt steady lamps and 4-volt,
0.72-watt flashing lamps only.
FUSE REPLACEMENT INSTRUCTIONS:
1. Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
2. Open fuse cover by sliding open the fuse access cover on top of
attachment plug toward blades.
3. Remove fuse carefully: turn fuse holder over, remove fuse.
4. Risk of fire. Replace fuse only with 3-amp, 125-volt fuse for
decorative lighting string (provided with product).
5. Close fuse cover by sliding closed the fuse access cover on top of
attachment plug.
BULB REPLACEMENT INSTRUCTIONS:
Grip plastic
not glass
Do not twist lamp
Pull straight out
Push straight in!
Remove lamp base Replace lamp base
New fuse
Burned fuse
PRINTED IN CHINA
For replacement parts, call our customer service department at 1-800-813-0206, 8 a.m. - 5 p.m., EST,
Monday - Friday.