Holiday Living TG76M4F74C01 User manual

ITEM #0712479
7.5 FT PRE-LIT
YORK CASHMERE PINE TREE
MODEL #TG76M4F74C01
Français p. 7
1
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-888-919-0070, 8 a.m. - 5 p.m., EST, Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
AB1641
Lowes.com
Holiday Living & Design®is a registered
trademark of LF, LLC. All rights reserved.

2
PACKAGE CONTENTS
3
2
1
4
5
6
1
1
1
DESCRIPTIONPART QUANTITY
1
Tree Top
1
2 Tree Middle
Tree Bottom
1
3
4Tree Stand
5
6
Cord (preassembled)
Foot Pedal (preassembled)
1
Lowes.com
Assemble
Red Labels
Together
Insert Red Label
Plugs Into Red
Labeled Extension Cord

3
SAVE THESE INSTRUCTIONS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 5 minutes.
No Tools Required for Assembly.
SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
RISK OF FIRE
Do not replace attachment plug. It contains a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
CAUTION
To reduce the risk of overheating, replace burned-out lamps promptly. Use 2.5-volt lamps only.
• Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When
products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting
(GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
• This seasonal product is not intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
• Do not secure the wiring of product with staples or nails, or place on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring for the night, or if left unattended.
• This is an electric product--not a toy! To avoid risk or fire, burns, personal injury and electric shock,
do not play with or place where small children can reach it.
• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string.
• Do not close doors or windows on the product or extension cords as this may damage the wire
insulation.
• Do not cover the product with cloth, paper or any material not part of the product when in use.
• This product is equipped with push-in type lamps. Do not twist lamps.
• This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit
ituation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or
products that may be attached to the product. Replace the fuse as per the user servicing instructions
(follow product marking for proper fuse rating) and check the product. If the replacement fuse blows,
a short-circuit may be present and the product should be discarded.
• Read and follow all instructions that are on the product or provided with the product.
Lowes.com

4
3. Remove protective cap from tree middle (2). Insert tree
middle (2) into tree bottom (1).
4. Insert tree top (3) into the top hole of the tree middle (2).
ASSEMBLY INSTRUCTIONS
2. Remove protective cap from tree bottom (1). Insert tree
bottom (1) into tree stand (4).
2
1
3
4
5
4
1
1
2
2
3
6
5
4
4
6
5
6
Lowes.com
Click
1. Open tree stand (4) by pulling apart the legs of the tree stand
(4) until they snap into an X-shape. Place tree stand (4) on a
level surface.
NOTE: To close tree stand (4), push the button in middle and
fold the legs back together.
4

5
2
1
3
65
4
aps.
5. Shape and shift tree branches to fill in any g
Insert the red-label plugs into red-label extension cord
and insert the plug of the green label extension cord
(5) into a wall outlet.
5
• Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or
frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections,
or exposed copper wire.
• When storing the product, carefully remove the product from wherever it is placed, including trees,
branches, or bushes, to avoid any undue strain or stress on the product conductors, connections
and wires.
• When not in use, store neatly in a cool, dry location protected from sunlight.
BULB REPLACEMENT INSTRUCTIONS:
1. Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
2. Lift up to unsnap locking tab; then pull lamp and plastic base straight
out of lamp holder.
3. Replace lamp with only 2.5-volt push-in type lamp provided with product.
FUSE REPLACEMENT INSTRUCTIONS:
1. Grasp the power cord plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord.
2. Open fuse cover by sliding open the fuse access cover on top of
attachment plug toward blades.
3. Remove fuse carefully: turn fuse holder over, remove fuse.
4. Risk of fire. Replace fuse only with 3-amp, 125-volt fuse for decorative
lighting string(provided with product). If applicable, replace fuse only with
5A-amp, 7A-amp or 10-amp, 125-volt fuse for cord-set (see fuse current
on cord-set plug).
5. Close fuse cover by sliding closed the fuse access cover on top of
attachment plug.
CARE AND MAINTENANCE
Grip plastic
not glass
Do not twist lamp
Pull straight out
Push straight in!
Remove lamp base Replace lamp base
Lowes.com
Burned fuse

6
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-888-919-0070, 8 a.m. - 5 p.m., EST,
Monday - Friday.
PRINTED IN CHINA
Holiday Living & Design®is a registered
trademark of LF, LLC. All rights reserved.
TROUBLESHOOTING
Bulb broke.
1. Start with the first unlit bulb, then gently push (don't twist)
each bulb firmly into the socket.
2. Look and feel for a broken bulb in the socket or an
empty socket where a bulb has fallen out.
Mark the bulb with a piece of tape and unplug the tree
before removing the bulb socket and any fragments.
Replace the broken bulb.
Replace any burned out bulbs.
One bulb will not light.
A section will
not light.
Bulb is broken.
1. Bulb is loose.
2. Bulb broke or
fell out.
Bulb burned out.
PART DESCRIPTION
A
B
Fuse
Bulb
Fuse Bulb
B
A
Lowes.com
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION