Holiday Living TV40M3J14C03 User manual

ITEM #0636002
4 FT PRE-LIT SCOTT
PINE TREE
MODEL #TV40M3J14C03
Français p. 6
1
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-888-919-0070, 8 a.m. - 5 p.m., EST, Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
AB15100 Lowes.com

2
PACKAGE CONTENTS
DESCRIPTIONPART QUANTITY
1
Tree Top
1
2
Tree Body
1
3Weighted Pot 1
2
1
3
Lowes.com

3
CAUTION
RISK OF FIRE
Do not replace attachment plug. It contains a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
To reduce the risk of overheating, replace burned-out lamps promptly. Use 2.5-volt lamps only.
• Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When
products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting
(GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
• This seasonal product is not intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
• Do not secure the wiring of product with staples or nails, or place on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring for the night, or if left unattended.
• This is an electric product--not a toy! To avoid risk or fire, burns, personal injury and electric shock,
do not play with or place where small children can reach it.
• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string.
• Do not close doors or windows on the product or extension cords as this may damage the wire
insulation.
• Do not cover the product with cloth, paper or any material not part of the product when in use.
• This product is equipped with push-in type lamps. Do not twist lamps.
• This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from the outlet. Also unplug any additio nal strings or
products that may be attached to the product. Replace the fuse as per the us er servicing instructions
(follow product marking for proper fuse rating) and check the product. If the replacement fuse blows,
a short-circuit may be present and the product should be discarded.
• Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 5 minutes.
No Tools Required for Assembly.
SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
Lowes.com

4
2. Insert the tree top (2) into the top of the tree body (1).
3. Shape and shift tree branches to fill in any gaps.
Plug the cord into a wall outlet.
ASSEMBLY INSTRUCTIONS
1. Insert the tree body (1) into the weighted pot (3).
1
1
2
3
2
1
2
1
3
3
Lowes.com

5
• Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or
branches, or bushes, to avoid any undue strain or stress on the product conductors, connections
• When not in use, store neatly in a cool, dry location protected from sunlight.
CARE AND MAINTENANCE
TROUBLESHOOTING
REPLACEMENT PARTS LIST
1. Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
out of lamp holder.
FUSE REPLACEMENT INSTRUCTIONS:
1. Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
2. Open fuse cover by sliding open the fuse access cover on top of
attachment
5. Close fuse cover by sliding closed the fuse access cover on top of
attachment plug.
BULB REPLACEMENT INSTRUCTIONS:
Grip plastic
not glass
Pull straight out
Remove lamp base Replace lamp base
Burned fuse
For replacement parts, call our customer service department at 1-888-919-0070, 8 a.m. - 5 p.m., EST,
Monday - Friday.
Bulb broke.
1. Start with the first unlit bulb, then gently push (don't twist)
each bulb firmly into the socket.
2. Look and feel for a broken bulb in the socket or an
empty socket where a bulb has fallen out.
Mark the bulb with a piece of tape and unplug the tree
before removing the bulb socket and any fragments.
Replace the broken bulb.
Replace any burned out bulbs.
One bulb will not light.
A section will
not light.
Bulb is broken.
1. Bulb is loose.
2. Bulb broke or
fell out.
Bulb burned out.
A
B
Fuse
Bulb
T NPAR DESCRIPTIO
Fuse Bulb
B
A
PRINTED IN CHINA
Holiday Living & Design®is a registered
trademark of LF, LLC. All rights reserved.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Lowes.com