HOMAC 500-S1 User manual

CASSETTATRITURATRICE
MACERATOR PUMP
KLEINHEBEANLAGE
HOMAC 500-S1
HOMAC 500-S2
INSTRUCTIONS FOR INSTALLATION AND USE

In compliance with EN12050-3
Measures in millimeters

2. INSTRUCTIONS FOR INSTALLATION AND USE
2.1. Warnings and precautions
•If the electricity supply fails, do not use the devices connected to the appliance.
•It is recommended to use a power outlet for the exclusive use of the appliance.
•The appliance can discharge only faeces, toilet paper and acid fatty and hot water (up to
80C°). Do not dispose unsuitable objects, hygienic articles or fibrous material that might
damage the pump
•Check that any device connected to the appliance is not leaking, as in that case the pump
will operate uselessly.Furthermore, in the event of a failure in the power supply, water
leakage from some device could flow back up and might then overflow.
•If the bathroom is not used for a long period, it is recommended to close the main water
supplies.
•This equipment can be used by children aged 8 and up if under surveillance, or if they
have received the instructions regarding a safely usage of device and if they understand
dangers involved. Cleaning and maintenance by the user should not be performed by
children unless they are older than 8 years and operate under surveillance. Keep any power
cable out of reach of children under the age of 8 years.
•The equipment can be used by people with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have supervision or if they have
received instructions regarding the use in safety of the device and understand dangers
involved.
•Children should not play with the equipment.
2.2. Maintenance | Service
It is strictly recommended to carefully read this warning and precautions guidelines, before
any maintenance and service operation on the product.
The HOMAC 500-S Series, consists of a water collection unit permanently fixed to the toilet,
and / or to other utilities, containing the engine components.
The maintenance is a simple operation executable in a few steps.
Removal of potential obstructions in the macerating chamber:
1. Unplug the power cord.
2. Unscrew the cap with the pump symbol as shown in Fig. 5.1
3. Remove the cap as shown in Fig. 5.1
4. Unscrew macerator chamber cap as shown in Fig. 5.2
5. Turn and remove macerator chamber cap as shown in Fig. 5.2
6. Remove clogging parts using pliers Fig. 5.3
7. Once the maintenance is completed reassemble the unit following inverse procedure
NB: DO NOT REMOVE OR REPLACE THE OIL PRESENT IN THE ENGINE. DO NOT TAMPER THE
MOTOR HOUSING OR THE DRAINAGE CAP. This type of action could jeopardize the unit and
lose coverage by guarantees.

2.3. Installation and use
HOMAC 500-S Series, consists of a box that incorporates a pump that can automatically
grind and expel acid, fatty hot water (up to 80°C) faeces and toilet paper through a .
23/28/32 or 44 mm diameter pipe to the nearest sewer.
It may be used to collect and pump under pressure (refer to the performance- related
specifications graph) the discharges of the sanitary fittings located in both the bathroom
(EN-12050-3 EN-12050-4) or the kitchen, including washing machine, dishwasher, and any
other device that needs to discharge waste water.
It is mandatory to install the non-return valve which, is included in the package.
In accordance with EN-12050-3 and EN-12050-4, if the macerator collects waste water
(toilet), only one washbasin and/or one bidet and/or one shower may also be connected.
The HOMAC 500-S Series, cannot be installed to appliances, such as washing machine and
dishwasher, if connected to the toilet.
In cases where it is not possible to interrupt the inflow into the product during normal
operation, the installation shall be equipped with a stand-by pumping device of the same
capacity, which starts automatically when necessary.
The installation shall be made in compliance with the prescription of the European Standard
EN 12056-4.
Fix the water tank unit with two crew plugs (Ø 3,5 mm) or similar, using the fixing holes.
HOMAC 500-S Series, can be connected to any type of toilet having a wall discharge in
compliance with European standards.
It is connected by inserting the toilet discharge into the rubber coupling on the tank and
fixing it with the clamp supplied (Fig. 2.2).
The outlet is connected to the top side (Fig 2.3) and other units of bathroom or kitchen
equipment are connected to the shortsides of the appliance (Fig. 2.4)
It is recommended not to connect to HOMAC 500-S Series, more than 1 appliance operating
potentially continuously (es. no more than 1 shower).
N.B.: The shower plate and bathtub must be at least 10 cm above floor level (Fig. 3).
All sanitary equipment connected must allow the interruption of water flow.
HOMAC 500-S Series, is equipped with an activated carbon filter for the ventilation of the
tank inside the pump compartment.
In the event that the auxiliary inlets are not used, assemble the relative closing plug (Fig.4)

Fig. 2.1
Fig. 2.2
Fig. 2.3
Fig. 2.4
Fig. 5.1
Fig. 5.2

Fig. 5.3
Fig. 4
Fig. 3
Specifications
Power supply
230 V ac
Power
450 W
Electrical absorption
2.0 A
Frequency
50 Hz
Protection class
IP 44
Max pressure
0,7 bar (7m)
Max capacity
100 l/min
Service
Intermittent
Sewage water temperature
<80°C
Sound power level
40 dB