Home Accents Holiday 23RT22823141 User manual

SKU # 1009 466 755
Model # 23RT22823141
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 3-Piece Yuletide Lane LED Santa Deer and
Tree Scene. We strive to continually create quality products designed to
enhance your home. Visit us online to see our full line of products available
for your home improvement needs. Thank you for choosing HomeAccents!
1-855-HDHoliday (1-855-434-6543)
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
3-Piece Yuletide Lane LED Santa Deer
andTreeScene
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many parts
are connected by the lighting string that runs throughout the item. Take special care not
to pull, cut or damage the lighting string. Read the entire manual prior to assembly and
identify all the parts included in the package against the parts list. It is recommended to
assemble parts of the product while laying flat on the ground versus standing the item
up to assemble the parts. If any parts are missing or damaged do not attempt assembly
but contact our customer service center or return to place of purchase with purchase
receipt.
Assembly of this product may require more than one person.
1-855-HDHoliday (1-855-434-6543)
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 4.8 Watts (0.04
Amps) for Santa, Rated at 2.4 Watts (0.02 Amps) for Christmas Tree and rated at 4.8
Watts (0.04 Amps) for Deer. Do not overload. Do not connect to another lighting string,
decorative outfit or other electrical products. Before you use or re-use this product
inspect it carefully. Discard or return to place of purchase with purchase receipt if the
product has cuts, damage, frayed wire insulation on cords, cracks in the socket
enclosures, loose connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections, and wires. If the product is placed
somewhere other than the ground it should be well secured, flat and stable.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the ground or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days maximum per year.
This product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS,
batteries, products that have been subjected to unauthorized repair and/or modification
and damage caused by shipping and improper handling, alterations, misuse, in store
display models or accidents. Questions, problems, missing parts? Before returning to the
store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-855-HDHoliday (1-855-434-6543)
Diagram of Parts
Parts List
Locater Name Qty.
A Hat & Head of Santa 1
B Front Body & Leg 1
C Back of Body 1
D Arm 2
E Star 1
F Base Stand of Santa 1
G Front of Tree 1
H Back of Tree 1
I Antler & Ear of Deer 2
J Head/Neck of Deer 1
K Body & Hind Leg of
Deer 2
L Front Leg of Deer 2
M Tail 1
N Scarf 1
O Christmas ball 1
P Base Stand of Deer 1
Hardware List
Locater Name Qty.
Q Spare Fuse 6
R Spare Bulb 8
S Plastic Tie 30
T Ground Stake 12
U Cotter Pin 3
A
B
C
F
D
D
G
H I
I
J
K
K
L
L
N
O
P
Q
R
S
T
U E
M

A
SSEMBLY
1 Assembling the Body of Santa
Align the back of Body (C) with the front Body & Leg (B) with each other
then insert the connecting rods on the front body into the connecting holes
on the back body and fasten at connecting loops with Plastic Ties (S).
2 Assembling the Head to the Body
Insert the connecting rods on the bottom of the Head (A) into the connecting
holes at the top of the Body (B,C) and fasten at the connecting loops with
Plastic Ties (S).
3 Assembling the Arms to Body
Insert the connecting rods on each Arm (D) into the connecting holes on the
back of the Body (C) and fasten at the connecting loops with Plastic Ties (S).
Insert the connecting rod of Star (E) into the matching connecting hole on
the Right Hand (D).
4 Assembling the Body of Santa to the Base Stand
Insert the connecting rods on the bottom of Santa's Legs (B) into the matching
connecting holes on the Base Stand (F) and fasten at the connecting loop with
Plastic Ties (S).The Base Stand comes with metal bars attached to stabilize the
Santa. Insert the hooked end of the metal bars into the metal nut on the back of
the Santa Body (C) then secure with the Cotter Pin (U).
5 Assembling the Christmas Tree
Align the two Halves of Tree (G,H) with each other then insert the connecting
rods on one half into the connecting holes on the other half and fasten at the
connecting loops with Plastic Ties (S).
6 Assembling the Light String
Wrap the Light String around the Tree for your desired look and secure with
Plastic Ties (S) over the metal wire frame.
C
B
S
A
B,C S
D
D
C
E
S
B
F
S
U
G
H
S
S
C

A
SSEMBLY
7 Assembling the Body & Hind Leg of Deer
Align the two Halves of Body & Hind Leg (K) with each other then insert
the connecting rods on one half into the connecting holes on the other half
and fasten at the connecting loops with Plastic Ties (S).
8 Assembling the Head to the Body
Insert the connecting rods on the bottom of Head (J) into the matching holes
at the top of the Body (K) and fasten at the connecting loops with Plastic
Ties(S).
9 Assembling the Body of Deer to the Base Stand
Insert the connecting rods on the bottom of the Hind Legs (K) into the
matching connecting holes on the Base Stand (P) and fasten at the
connecting loop with Plastic Ties (S).The Base Stand come with metal
frame attached to stabilize the Deer. Insert the hooked end of the metal
frame into the metal nut on the bottom of Body (K) .
10 Assembling the Front Legs and Antler & Ear
Insert the connecting rods on the Front Legs (L) into the matching holes on
the front of the Body (K). Insert the connecting rods on the Antler & Ear of
Deer (I) into the matching holes on the top of Head (J). Insert the connecting
rod on the Tail (M) into the matching hole on the back of Body (K).
11 Assembling the Scarf and Christmas Ball
Hang the Christmas Ball (O) on a metal hook off the Deer's mouth. Wrap
the Scarf (N) around the neck of the Deer for your desired look.
12 Assembling the Ground Stake
Insert the Ground Stakes (T) over the metal frame at each corner of the Base
Stand and metal loops of Tree then into the ground firmly.
K
K S
J
K S
K
P
S
L
L
I
I
K
J
M
O
N
T