Home Accents Holiday 1001302145 User manual

Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always be
followed including the following:
a) READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b) This product is forindoor use only. The electrical rating 1.7 A 120 V 60
Hz.
c) This seasonal use product is not intended for permanent installation or
use.
d)Donotmountorplaceneargasorelectricheaters,fireplace,candlesor
other similar sources of heat.
e)Donotsecurethewiringof theproductwith staplesor nails,or placeon
sharp hooks or nails.
f) Do not let lamps rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, when retiring for the night,
or if left unattended.
h) This is an electric product – not a toy! To avoid risk of fire,burns
personal injury and electric shock it should not be played with or placed
where small children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire, or light string.
k)Donotclosedoorsorwindowsontheproductorextensioncordsasthis
may damage the wire insulation.
I)Donotcover the productwithcloth, paperor any material notpart of the
product when in use.
m) This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows, unplug
theproduct from theoutlet. Also unplug any additional strings or products
that may be attached to the product. Replace the fuse as per the User
Servicing Instructions (following product marking for proper fuse rating)
and check the product. If the replacement fuse blows, a short-circuit may
be present and the product should be discarded.
n) This product is equipped with push-in type lamps. Do not twist lamps.
o)This producthas apolarizedplug(one bladeis wider than theother)as
afeaturetoreducetheriskofelectricshock. Thisplugwillfitinapolarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not use with
an extension cord unless plug can fully inserted. Do not alter or replace
the plug.
p)Read and follow all instructions that are ontheproductor provided with
the product.
q) SAVE THESE INSTRUCTIONS.
CAUTION! – ALWAYS UNPLUG YOUR
TREE FROM ITS POWER SOURCE
BEFORE ASSEMBLING OR
DISASSEMBLING.
7 ft Noble Fir Quick-Set Artificial Christmas tree
with 500 Clear Lights
SKU# 1001302145
Package Contents
A. Tree top
Qty: 1 B. Tree center Qty: 1 C. Tree bottom Qty: 1
D. Stand with an eye
bolt
Qty: 1
E. Power cord
Qty: 1 F. Replacement bulb
Qty: 10
G. Fuse Qty: 1
Assembly
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step2.Openthestandtoa90degreeangleuntiltheholelinesupwiththe
hole on the tube.
Step 3. Screw an eye bolt into the hole.
Assembling the tree
Pleaseremove protective covers from the baseof the polefor each tree
section before assembling.
Step1. Inserttreebottom (C)intothetreestand(D)andtightenthescrew.
(See Fig. 1)
Step 2. Insert tree center (B) into the tree bottom (C). (See Fig. 2)
Step 3 Insert the tree top (A) into the tree center (B). (See Fig. 3)
Step 4. Remove the plastic protective cover on the plug fixed on the
pole of the bottom section (C). Insert the plug into the end
connector of the power supply cord with an on/off foot pedal
switch according to the magnified drawing on Fig. 4.
Pre-Assembly

Step5. Allowbranchestofallintoplaceorgentlypullbranchesupandout.
When adjusting branches be sure that all wires are free of branch
hinges. (See Fig. 5)
Step 6. Shape the branches. Starting with tipsclosestto the pole,shape
onetiptotheright,onetotheleftandoneatthecenterofthemain
stem. Repeat pattern for each branch. (See Fig. 6)
Step 7. Plug the well-connected power supply cord from the bottom
section (C) into electrical outlet. Please note this tree comes
with an on/off foot pedal switch for easy illumination.
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose, broken
bulbs and /or missing bulbs. Replace bulbs promptly with the
replacement bulbs provided in order to maintain the performance and life
expectancy of your tree.
Step1. Connecteachtreesectionwellandplugthepowercordintoawall
outlet.
Maintenance
Fuse Replacement
A) Extension cord fuse replacement (1 replaceable 5 A, 125 V fuse is
located in the plug):
Note: This plug will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug.
1. Grasp plug and remove from its power source.
2. Locate blown fuse bysliding access cover ontop of
plug towards prongs.
3. Remove blown fuse by turning the plug over. Fuses should fall into
your hand (gentle tapping may be required).
4. Locate spare replacement fuse included in plug.
5. Insert sparereplacement fuse. Close fuse cover by slidingfuse access
cover towards the cord.
CAUTION:To reduce risk of fire – replace fuse in extension
cord with only 5 A, 125 V fuse. Do not replace attachment plug. Discard
product if the attachment plug is damaged.
B) Fuse replacement of the plug fixed on bottom section
(C):
1. Grasp power supply plug and
remove from its power source.
2. Locate the plug fixed on bottom
section (C). Slide access cover on
top of plug towards prongs.
3. Remove blown fuse.
4. Locate spare replacement fuse provided with product.
5. Insert spare replacement fuse. Close fuse cover by
sliding fuse access cover back.
CAUTION: To reduce risk of fire – replace fuse in plug fixed
on bottom section (C) with only 3 A, 125 V fuse. Discard product if the
attachment plug is damaged.
Replacing the bulbs
1. Grasp plug and remove from its power source.
2. Unlock the lamp lock on the socket of the bulb.
3. Pull bulb AND plastic base straight out of socket. Do not twist bulbs
while you are removing them.
4. Replace burnt out bulb with 2.5 V, 0.425 W bulb ONLY. (Additional
bulbs are included for your convenience.)
5. Relock the lamp lock on the socket of the bulb.
If the new lamp base does not fit in lampholder, follow these steps:
a) Remove the base of burned out lamp by straightening lamp leads and
gently pull lamp out.
b) Thread leads of new lamp through holes in old
base with one lead in each hole.
c) After lamp is fully inserted into ase, bend each
lead up, like other lamps in the light set so that the
leads will touch the contacts inside the lampholder.
CAUTION! – ALWAYS UNPLUG YOUR TREE FROM ITS
POWER SOURCE BEFORE ATTEMPTING FUSE AND BULB
REPLACEMENT.
Care and Cleaning
Step 1. Remove all ornaments and decorations.
Step2. Unplugtheplugcordfromthewalloutlet. Andremoveyourpower
supply cord with an on/off foot pedal switch from bottom section
(C) and save it.
Step 3. Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
Step 4. Repeat this step for the center and bottom tree sections.
Step 5. Carefully place all tree sections into a shipping box and tape it
shut.
Step 6. Store your tree in a cool, dry place away from sunlight.
UL Model No. TMH7-5(1.7)
Problem Solution
The tree
does not
light
Ensure that all tree sections are plugged into each
other and that the tree is plugged into the wall outlet.
Check for blown fuses at the extension cord plug and
the plug fixed on the bottom section (C). Replace as
needed with the replacement fuses provided.
Check for loose, broken, or missing bulbs and replace
as needed with the replacement bulbs provided.
If you are still experiencing problems with the tree
please call 1-877-527-0313 for instructions.
Troubleshooting