Home Accents Holiday TG70M5410L00 User manual

Assembling the tree stand
Assembly
Step 1 . Choose a location near a wall outlet.
Step 2 . Unfold the legs of the tree stand and lay the stand on
the floor.
Step 3 .Slide the locking disk of the tree stand down until it
snaps into place.
Step 1. Remove the protective caps from the tree bottom and insert
the pole into the tree stand.
Step 2. Continue by inserting the upper tree section(s) to the lower
section(s) until inserting the tree top.
Step 3. Shape the branches to your preference by working from the
bottom to the top. When adjusting branches, ensure that all wires
are free of branch hinges.
Step 4. Connect the light strings as per the color labels indicated in
attached photo and insert green label plug into the wall outlet.
Step 5. Shape the tree from the bottom to the top. Start with the
branches farthest from the pole – fan out in a star shape,
and continue until the entire tree is shaped.
Step 6. When finished shaping the branches, slightly upsweep all branch
tips for a uniform look.
Assembling the tree
Christmas Tree
Model: TG70M5410L00
Sku # 1003 173 219
Tree top
Section 2
Section 1
Insert
green-labelled
plug into wall
outlet
Foot Pedal
on/off Switch
Insert Red Label
Plugs Into Red
Labeled Extension Cord
S100
S100
S100
Package Contents
Pre-Assembly
Part Description Quantity
1
1
1
1
D Tree stand
A Tree top
B Tree center, Sticker 2
C Tree center, Sticker 1
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b. This product is for indoor use only.The electrical rating is 0.12A
120V 60Hz.
c. This seasonal product is not intended for permanent installa
tion or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or
place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for
the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire,
burns, personal injury and electric shock it should not be
played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or
light string.
k. Do not close doors or windows on the product or extensions
cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material that
is not a part of the product when in use.
m. Read and follow all instructions that are on the product or
provided with the product.
n. SAVE THESE INSTRUCTIONS
When using electrical products, basic precautions should always
be followed, including the following:
Top view Side view
TM
NEED HELP?
DO NOT RETURN TO STORE. Call: 1-877-527-0313
Form 8am to 5pm EST, Monday through Friday.

The tree
does not
light
Troubleshooting
Problem Solution
Ensure that all tree sections are plugged into
each other and that the tree is plugged into the
wall. If your tree came with a foot pedal, step on
the On/Off button.
Check for loose, broken, or missing bulbs and
replace as needed with the replacement bulbs
provided.
Check for blown fuses at the light string and
power cord plugs. Replace as needed with the
replacement fuses provided.
For blown fuses (if applicable), please refer to
User Servicing Instructions – Fuse Replacement
and replace as instructed.
TM
Christmas Tree
Model: TG70M5410L00
Sku # 1003 173 219
Spare parts
Repairing Loose Hinges
This tree package includes hinge pins, washers and bulbs, for any
replacement or repair that you need to perform on your tree. If
extra parts are needed, contact the Customer Service Team at
1-877-527-0313 between the hours of 8 am and 5 pm EST, Monday
through Friday.
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the bracket
and secure with a washer.
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose
plugs and/or broken, loose, or missing bulbs. Replace bulbs
promptly with the replacement bulbs provided in order to
maintain the performance and life expectancy of your tree.
Step 1. Connect the light strings of the tree together and plug the
adapter into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the On/Off
button.
Operation
Step 1. Grasp the power adapter or power cord plug, and than
unplug from the power outlet. Do not pull the power cord.
LAMP REPLACEMENT
Step 2. Lift up lamp lock tab, then pull the
lamp and plastic lamp base straight
out of the lamp-holder.
Step 3.
Replace with a new spare lamp
provided with this product.
(Reference figure only)
Maintenance
Care and Cleaning
1. Remove all ornaments and decorations.
2. Unplug the adapter from the wall and then unplug each section
of the tree.
3. Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
5. Carefully place all tree sections into a shipping box and tape
it shut.
6. Store your tree in a cool, dry place away from sunlight.
Light Section Out?
Connect Plug Between Sections
Not Full?
Spread Branches
No Lights Working?
Check Fuse
Run Extension Cord
Tree Topper? Other Issue?
1-877-527-0313
Branch Hanging Low?
Bend up