Home Accents Holiday 23RT40619114 User manual

SKU # 1005 416 747
Model # 23RT40619114
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 2-Piece Polar Wishes LED Deer. We strive
to continually create quality products designed to enhance your home. Visit us
online to see our full line of products available for your home improvement
needs. Thank you for choosing HomeAccents!
1-855-HDHoliday (1-855-434-6543)
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
2-Piece Polar Wishes LED Deer
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many parts
are connected by the lighting string that runs throughout the item. Take special care not
to pull, cut or damage the lighting string. Read the entire manual prior to assembly and
identify all the parts included in the package against the parts list. It is recommended to
assemble parts of the product while laying flat on the ground or table versus standing
the item up to assemble the parts. If any parts are missing or damaged do not attempt
assembly but contact our customer service center or return to place of purchase with
purchase receipt.
Assembly of this product may require more than one person.
1-855-HDHoliday (1-855-434-6543）
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 2.4 Watts (0.02
Amps) for Baby Deer and rated at 4.8 Watts (0.04 Amps) for Doe. Do not overload. Do
not connect to another lighting string, decorative outfit or other electrical products.
Before you use or re-use this product inspect it carefully. Discard or return to place of
purchase with purchase receipt if the product has cuts, damage, frayed wire insulation
on cords, cracks in the socket enclosures, loose connections, exposed copper wire or
other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections, and wires. If the product is placed
somewhere other than the ground it should be well secured, flat and stable.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the ground or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS,
batteries, products that have been subjected to unauthorized repair and/or modification
and damage caused by shipping and improper handling, alterations, misuse, in store
display models or accidents. Questions, problems, missing parts? Before returning to the
store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-855-HDHoliday (1-855-434-6543)
Diagram of Parts
Parts List
Locater Name Qty.
A Ear of Baby Deer 2
B Head/Neck of Baby
Deer 1
C Body of Baby Deer 1
D Tail of Baby Deer 1
E Front Leg of Baby
Deer 2
F Hind Leg of Baby Deer 2
G Ear of Doe 2
H Head/Neck of Doe 1
I Body of Doe 1
J Tail of Doe 1
K Front Leg of Doe 2
L Hind Leg of Doe 2
M Bow of Doe 1
N Bow of Baby Deer 1
Hardware List
Locater Name Qty.
O Spare Bulb 4
P Spare Fuse 4
Q Plastic Tie 20
R Ground Stake 8
R
Q
O
P
A
D
C
F
N
B
M
E
G
L
H
I
K
J
A
E
F
G
K L

1 Assembling the Legs to the Body of Baby Deer
Insert the connecting rods on the Baby Deer's Front and Hind Legs (E,F)
into the connecting holes on the underside of the Body (C) and fasten
together at the connecting loops with the Plastic Ties (Q). The Legs come
with metal bars attached to stabilize the Baby Deer. Insert the hooked end
of the metal bars into the metal hole on the opposite Leg.
A
SSEMBLY
2 Assembling the Head/Neck to Body of Baby Deer
Insert the connecting rods on the bottom of the Baby Deer's Head/Neck (B)
into the connecting holes on the front of the Body of Baby Deer (C) and
fasten together at the connecting loops with Plastic Ties (Q).
3 Assembling the Ears & Tail to Body of Baby Deer
Insert the connecting rods on both Ears of Baby Deer (A) into the matching
connecting holes at the top of Head/Neck of Baby Deer (B). Insert the
connecting rod on the Tail of Baby Deer (D) into the connecting hole at the
rear of Body of Baby Deer (C). Insert the wires on the backside of the Bow
of Baby Deer (N) through the material on the body then twist the wires
together to secure.
4 Assembling the Legs to the Body of Doe
Insert the connecting rods on the Front and Hind Legs of Doe (K,L) into the
connecting holes on the underside of the Body of Doe (I ) and fasten together
at the connecting loops with the Plastic Ties (Q). The Legs come with metal
bars attached to stabilize the Doe. Insert the hooked end of the metal bars
into the metal hole on the opposite Leg.
5 Assembling the Head/Neck to the Body of Doe
Insert the connecting rods on the Head/Neck of Doe (H) into the connecting
holes on the front of the Body of Doe (I ) and fasten together at the connecting
loops with Plastic Ties (Q).
6 Assembling the Ears & Tail to Body of Doe
Insert the connecting rods on both Ears of Doe (G) into the matching
connecting holes at the top of Head /Neck of Doe (H). Insert the connecting
rod on the Tail of Doe (J) into the connecting hole at the rear of Body of Doe
(I ). Insert the wires of the Bow of Doe (M) through the material of the body
then twist the wires together to secure.
7 Assembling the Ground Stakes
Insert the Ground Stakes (R) over the metal frame at each hoof of the Baby
Deer and the Doe then firmly into the ground.
E
E
F
F
C
Q
B
C
Q
A
B
D
C
N
A
L
Q
K
I
L
K
H
I
Q
G
H J
I
M
G
R