Home Accents Holiday TY245-2024 User manual

OMS THD SKU #1005 178 613
Model # TY245-2024
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 52in 70 Light LED Ghost with "BOO" Sign.
We strive to continually create quality products designed to enhance
your home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
52in 70 Light LED Ghost with "BOO" Sign
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground or a flat
surface. Many parts are connected by the lighting string that runs throughout the
item. Take special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package against
the parts list. It is recommended to assemble parts of the product while laying flat on
the ground versus standing the item up to assemble the parts. If any parts are
missing or damaged do not attempt assembly but contact our customer service
center or return the product to place of purchase with receipt.
* Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on the cord.
CAUTION:The lighting string on this product is rated at 4.8 Watts (0.04
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the product taking caution not to cut any electrical wires.
c. Wipe the product with a damp cloth and allow to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Trouble Shooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS,
products that have been subjected to unauthorized repair and/or modification and damage
caused by shipping and improper handling, alterations, misuse, in store display models or
accidents. Questions, problems, missing parts? Before returning to the store, call Home
Accents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
Diagram of Parts
Parts List
A Head & Upper Body of
Top Ghost 1
B LeftArm of Top Ghost 1
C Letter "B" 1
D Middle Letter "O" 1
E Lower Body of Top Ghost 1
F Head & Upper Body of
Bottom Ghost 1
G LeftArm of Bottom Ghost 1
H Lower Body of Bottom
Ghost 1
I Lower Letter "O" 1
J Support Bar
1
K Support Frame
1
Hardware List
L Spare Bulb
2
M Cotter Pin 1
N Spare Fuse 2
O Ground Stake 4
P Plastic Tie
15
C
A
E
F
HI
N
L
O
B
P
K
J
M
G

A
SSEMBLY
1 Assembling the Head & Lower Body of Bottom Ghost
Insert the connecting rods on the top of the Lower Body of Bottom
Ghost (H) into the connecting holes on the bottom of the Head & Upper
Body of Bottom Ghost (F) and secure them together at the connecting
loops with the Plastic Ties (P).
2 Assembling the Letters "O"
Insert the connecting rods on the sides of each Letter "O" (D,I) into the
connecting holes on the sides of the Head & Upper Body and Lower Body
of Bottom Ghost (F,H) and secure them together at the connecting loops
with Plastic Ties (P). Note: Part D goes on the right side of the Ghost and
Part I goes on the left side of the Ghost.
3 Assembling the Letter "B" and Left Arm of Bottom Ghost
Insert the connecting rods on the Letter "B" (C) into the connecting holes
on the top of the Head and Upper Body of Bottom Ghost (F) then insert
the connecting rods on the Left Arm of Bottom Ghost (G) into the
connecting holes on the left side of the Bottom Ghost and secure all
parts together at the connecting loops with Plastic Ties (P).
4 Assembling the Support Bar to the Support Frame
Insert the bottom (straight end) of the Support Bar (J) into the top of the
Support Frame (K) then secure with the built in locking pin.
5 Attaching the Support Frame to the Lower Ghost with
"BOO" sign
Place the assembled Lower Ghost with "BOO" sign face down on the
floor. The Support Frame (K) comes with a metal swivel bar attached to
stabilize the left side Letter "O" (I). Insert the "L" shaped end of the
Support Bar (J) into the connecting hole on the Letter "B" (C) then
secure together with the Cotter Pin (M).
6 Attach the Lower Body of the Top Ghost
Insert the connecting rods on the Lower Body of Top Ghost (E) into the
connecting holes on the side of the Letter "B" (C) and secure them
together at the connecting loops with Plastic Ties (P).
7 Attaching the Top Ghost
Insert the connecting rods on the Left Arm of Top Ghost (B) into the
connecting holes on the Head and Upper Body of Top Ghost (A) and
the top of Letter "B" (C ) then insert the connecting rods on the bottom
of the Head and Upper Body of Top Ghost into the connecting holes
on the top of the Letter "B". Secure all the parts together at the
connecting loops with the Plastic Ties (P).
8 Assembling the Ground Stakes
Insert the Ground Stakes (O) over the metal ground frame loop or frame
at four corners then into the ground firmly. (see diagram below for
placement)
F
H
P
P
DF
I
H
P
G
C
F K
J
M J
C
K
I
F
C E
P
P
B
C
A
O