Home Accents Holiday TY605-1711-1 User manual

OMS THD SKU # 1002 455 693
Model # TY605-1711-1
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 70in 180 Light LED Sleigh. We strive to continually
create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home decoration needs.
Thank you for choosing Home Accents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
70in 180 Light LED Sleigh
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 14.4Watts
(0.12Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product, inspect it
carefully. Discard or return to place of purchase with purchase receipt if the product
has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures,
loose connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Parts List
Locater Name Qty.
A Back Side Panel 2
B Front Side Panel 2
C Left Front & Back
Runner 2
D Right Front & Back
Runner 2
E Back Panel 1
F Seat Panel 1
G Front Panel 1
H Stabilizing Bar 3
Hardware List
Locater Name Qty.
I Bolt & Wingnut 12
J Ground Stake 4
K Plastic Tie 10
L Spare Fuse 6
M Spare Bulb 6
I J K L M
A B
C D
E F
G H

A
SSEMBLY
1 Assembly the Runners
The Runners have a Left and Right Front and Back Runner (C&D).
For both Left and Right Runners align the Front and Back Runners
together and insert the connecting rods into the connecting holes.
Secure at the connecting loop with the Bolt and Wingnut (I).
2 Assembly the Runner Stabilizing Bars
Insert the "L" Shaped ends of the three Stabilizing Bars (H) into the
corresponding holes on the left and right runners to secure them in
position.
3 Assembling the Seat Panel to the Runners
Insert the metal connecting rods at the bottom of the Seat Panel (F) into
the connecting holes on the top of the Left and Right Runners. Secure
with Plastic Ties (K) around the metal frames.
4 Assembling the Front and Back Side Panels
For both the Left and Right Front and Back Side Panels (A&B) insert the
connecting rods on the back edge of the Front Panels into the connecting
holes on the front edge of the Back Panels. Insert the connecting rods on
the bottom of the Side Panels into the connecting holes on the top of the
Runners. Secure all parts with Plastic Ties (K).
5 Assembling the Front and Back Panels
Insert the connecting rods on the Back Panel (E) into the connecting
holes on the top back corners of the two Side Panels and the back edge
of the Seat panel. Insert the connecting rods on the Front Panel G) into
the connecting holes on the top front corners of the two Side Panels
and the front edge of the Seat Panel. Secure with Plastic Ties (K).
6 Securing the Sleigh with Bolt & WingNut
Secure the front edge of the two Side Panels to the Runners using the
Bolt and Wingnuts (I) provided.
7 Inserting the Plastic Ties to the Sleigh
Secure the different parts of the Sleigh together using the Plastic
Ties (K) provided.
8 Securing the Sleigh to the Ground
Secure the Sleigh to the ground using the metal Ground Stakes (J)
provided. The hooked end of the Ground Stake should go over the
metal frame and four corners then into the ground.