Home Decorators Collection 23MMP90586-PD01 User manual

KERRINGTON ELECTRIC FIREPLACE MEDIA MANTEL
USE AND CARE GUIDE
We appreciate the trust and confidence you have placed in Home Decorators through the purchase of this electric fireplace. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Decorators!
THANK YOU
QUESTIONS, PROBLEMS, MISSING PARTS? BEFORE RETURNING TO THE STORE,
CALL HOME DECORATORS COLLECTION CUSTOMER SERVICE
MONDAY - FRIDAY 8 A.M. - 7 P.M. EST, AND SATURDAY 9 A.M. - 6 P.M. EST.
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
1006152685/316091776/23MMP90586-PD01
1006152681/316091778/23MMP90586-PG76
1006152683/316091777/23MMP90586-TPO98
1006335689/316091776/23MMP90586-PD01H

2
MAXIMUM LOAD 60 lb. (27.2 kg)
MAXIMUM LOAD 20 lb. (9.1 kg)
MAXIMUM LOAD 15 lb. (6.8 kg)
MAXIMUM LOAD 15 lb. (6.8 kg)
CAUTION: This unit is intended for use only with the products and maximum weights indicated. Use with other products or products heavier
than the maximum weights indicated may result in instability causing possible injury.
NOTE: Flat Panel TVs with base support should be placed squarely in the center of the stand with no overhang on any side.
Maximum Load Warning ...........................................2
Safety Information.....................................................3
Warranty ..................................................................... 5
Pre-Assembly............................................................. 6
Hardware Included ................................................... 6
Product Specications....................................................... 7
Tools Required ................................................................... 7
Package Contents.............................................................. 8
Assembly....................................................................9
Operation .................................................................23
FCC/IC Information......................................................... 26
Care & Cleaning.......................................................26
Troubleshooting.......................................................27
Replacement Parts.................................................. 29
Maximum Load Warning
Table of Contents

3
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Please read and understand this entire manual before
attempting
to assemble, operate or install the product. If you
have any question regarding the product, please call customer
service at 1-800-986-3460, 8 a.m.-7 p.m., EST, Monday-Friday,
9 a.m. - 6 p.m., EST, Saturday.
When using electrical appliances, basic precautions should
always be followed to reduce the risk of re, electrical shock,
and injury to persons including the following:
1. Read all instructions before using this appliance.
2. If possible, always unplug this appliance when not in use.
3. Only a qualied service person should repair this product.
4. Do not use outdoors.
5.
Do not cover the cord under the carpeting. Do not cover
with throw rugs, runners or the like. Arrange the cord away
from trafc areas and where it will not be tripped over.
6. To disconnect this appliance, turn the controls to the off
position, and then remove the plug from the outlet.
7. Connect to properly grounded outlets only.
8.
This appliance, when installed, must be electrically
grounded in accordance with local codes or, in the
absence of local codes, with the current CSA C22.1
Canadian Electrical Code. For U.S.A. installations, follow
local codes and the National Electrical Code, ANSI/NFPA
NO.70.
9. This appliance has hot and arcing or sparking parts inside.
Do not use it in areas where gasoline, paint or ammable
liquids are used or stored. This replace should not be
used as a drying rack for clothing. Do not hang Christmas
stockings or other decorations on or near this product.
10. There is a thermostat limiter inside the heater. When inner
temperature overheating or abnormal heating occurs, the
thermostat protective device will cut off the power supply
to avoid damage to the replace or risk of re.
Safety Information
WARNING: Under no circumstances should this replace be
modied. Parts that must be removed for servicing must be
replaced prior to operating this replace again.
DANGER:
High temperatures may be generated under
certain abnormal conditions. Do not partially or fully cover
or obstruct the front of this heater.
WARNING: If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
WARNING: In order to avoid overheating, do not cover the
heater.
WARNING:
Use extreme caution when operating heater
near children and the disabled.
WARNING:
Do not insert or allow foreign objects to enter
any ventilation or exhaust opening as this may cause an electric
shock or re, or damage the appliance.
WARNING: To prevent a possible re, do not block air intakes
or exhaust in any manner. Do not use on soft surfaces, like a bed,
where the opening may become blocked.
WARNING:
This appliance has hot and arcing or sparking parts
inside. Do not use it in areas where gasoline, paint or ammable
liquids are used or stored. This replace should not be used as a
drying rack for clothing. Do not hang Christmas stockings or other
decorations on or near this product.
WARNING:
Use this appliance only as described in the manual.
Any other use not recommended by the manufacturer may cause
re, electric shock or injury to persons.
WARNING: This heater is not intended for use in bathrooms,
laundry areas and similar indoor locations. Never locate this
appliance where it may fall into a bathtub or other water container.
WARNING: This appliance is not a toy. Supervise children
playing near it.
WARNING:
This heater may include a visual alarm to warn
that parts of the heater are getting excessively hot. If the alarm
illuminates, immediately turn the heater off and inspect for any
objects on or adjacent to the heater that may have blocked the
airow or otherwise caused high temperatures to have occurred.
DO NOT OPERATE THE HEATER WITH THE ALARM ILLUMINATING.
CAUTION:
Never leave the heater operating unattended.
Extreme caution is necessary if unsupervised children or invalids
are nearby.
CAUTION:
Before assembly, carefully use scissors or a utility
knife to cut and unwrap all parts. Make sure you do not discard
the hardware.

4
NOTE:
To avoid injury from unexpected starting or electrical
shock, do not plug the power cord into a source of power during
unpacking and assembly. The cord must remain unplugged
whenever you are adjusting/assembling the replace.
If any part is missing or damaged, do not attempt to use or plug
in the power cord until the missing or damaged part is correctly
replaced.
NOTE:
Use care in assembling your new fireplace. Take your
time and use the hardware provided and a quality Phillips head
screwdriver. Never overtighten bolts.
• Do not sit on any part of the mantel.
NOTE:
SAVE THESE
INSTRUCTIONS
Safety Information (continued)

5
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Warranty
1 Year Limited Warranty: The manufacturer warrants that your new Electric Fireplace is free from manufacturing and material defects for
a period of one year from date of purchase, subject to the following conditions and limitations.
1. Install and operate this appliance in accordance with the installation and operating instructions furnished with the
product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify
this warranty.
2. This warranty is non-transferable, and is made to the original owner, provided that the purchase was made through
an authorized supplier of the product.
3. The warranty is limited to the repair or replacement of part(s) found to be defective in material or workmanship,
provided that such part(s) have been subjected to normal conditions of use and service, after said defect is conrmed
by the manufacturer’s inspection.
4. The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by refunding
the wholesale price of the defective part(s).
5. Any installation, labor, construction, transportation, or other related costs/expenses arising from defective part(s),
repair, replacement, or otherwise of same, will not be covered by this warranty, nor shall the manufacturer assume
responsibility for same.
6. The owner/user assumes all other risks, if any, including the risk of any direct, indirect or consequential loss or
damage arising out of the use, or inability to use the product, except as provided by law.
7. All other warranties – expressed or implied – with respect to the product, its components and accessories, or any
obligations/liabilities on the part of the manufacturer are hereby expressly excluded.
8. The manufacturer neither assumes, nor authorizes any third party to assume on its behalf, any other liabilities with
respect to the sale of the product.
9. The warranties as outlined within this document do not apply to non-accessories used in conjunction with the
installation of this product.
10. This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.
This warranty is void if:
a. The replace is subjected to prolonged periods of dampness or condensation.
b. Any unauthorized alteration, willful abuse, accident, or misuse of the product.
c. You do not have the original receipt of purchase.
Warranty

6
HARDWARE INCLUDED
LL
TT UU VV WW XX
MM
GG
OO PP
CC DD
NN
Part Description Part Number Quantity
AA Plastic Connector Block PH-PCB XXX005 22
BB Bolt 6.3 x 12 mm PH-BLTBLK002 52
CC Bolt 6.3 x 32 mm P23MMP90586-CC 4
DD 16 mm washer PH-WSRZNC002 12
EE USB output 980# 1
FF Screw 3 x 12 mm PH-SCRBLK004 2
GG Magnet with single spring PH-MTLBLK001 2
HH Screw 3.5 x 15 mm PH-SCRBLK015 8
II Screw 4 x 50 mm PH-SCRBLK006 10
JJ Screw 3 x 12 mm PH-SCRBLK007 2
KK Tipping Restraint Hardware PH-BKTWHT003 2
LL Screw 3.5 x 19 mm P23MMP90586-LL 16
MM Back Panel Bracket PH-BKTBRW017 16
NN Rolling Door Hanger PH-BDRBLK002 4
OO Door Bumper PH-BMPCLR001 2
PP Handle (with screw) A5611 2
QQ Slider PH-BDGBLK001 2
RR Screw 4 x 16 mm PH-SCRBLK019 4
SS Door Stopper P23MMP90586-SS 4
TT Bolt 4 x 19 mm P23MMP90586-TT 4
UU Right Pin Hinge P23MMP90586-UU 2
VV Left Pin Hinge P23MMP90586-VV 2
WW Screw 3.5 x 12 mm PH-SCRBLK013 8
XX Shelf Pin PH-SPNPCSPLB2 16
YY Screw 4 x 15 mm PH-SCRBLK009 2
ZZ Metal Bracket PH-BKTBLK007 2
Pre-Assembly
EE FF HH
JJ
RR
ZZ
II
QQ
YY
KK
SS
AA BB

7
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Phillips Screwdriver
NOTE:
Hardware not shown to actual size.
PRODUCT SPECIFICATIONS
VOLTAGE 120VAC, 60 Hz
AMPS 12.5 Amps
WATTS 1500 Watts
PLANNING ASSEMBLY
Before beginning assembly of product, make sure all parts are present. Compare parts with Hardware Included and Package Contents lists.
If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement
parts.
Estimated Assembly Time: 30 Minutes
TOOLS REQUIRED
Pre-Assembly
REPLACEMENT PARTS
AAA BBB
Part Description Part Number Quantity
AAA Floor Glide PH-GLDBRW001 8
BBB Metal Plate PH-PLTBLK001 2
USB INPUT 5VDC / Max 2.4 Amps
USB OUTPUT 5VDC / Max 2.4 Amps

8
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Part Description Quantity
A Bottom Shelf 1
B Base Left Side Rail 1
C Base Back Rail 1
D Base Right Side Rail 1
E Base Front Rail 1
F Decorative Base Panel 1
G Top Panel 1
H Center Shelf 1
I Left Partition 1
J Right Partition 1
K Left Side Panel 1
L Right Side Panel 1
M Back Panel 2
N Center Back Panel 1
OFireplace Insert 1
P Top Front Rail 1
Q Left Rolling Door 1
R Right Rolling Door 1
S Left Cabinet Door 1
T Right Cabinet Door 1
UAdjustable Shelf 4
PACKAGE CONTENTS
NOTE: All panels are labeled left
and right as viewed from the front of
unit.
Pre-Assembly (continued)
Q
B
C
A
KJ
M
L
D
F
S
O
U
U
U
U
T
R
H
I
M
G
E
P
N

9
1Preparing the base
2Connecting the base panels
Assembly
Locate the Base Rails (B, C, D, E) and place on a at
surface.
Insert Bolts (BB) through the two-hole Plastic Connector
Blocks (AA) on each rail as shown.
Tighten with the Phillips screwdriver.
Align the Base Left Side Rail (B) with the Base Back Rail (C)
and push together. Secure with the Bolts (BB) using a
Phillips screwdriver.
Repeat to attach the Base Right Side Rail (D).
B
B
C
C
E
BB
BB
AA
D
D

10
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
3
4
Attaching the front base panel
Assembling the base
C
E
D
A
Align the Base Front Rail (E) with the previously
assembled base rails from step 2.
Secure with Bolts (BB) using a Phillips screwdriver.
Locate the Bottom Shelf (A) and place upside down on
a at surface.
Attach the assembled base rails from step 3 to the
bottom of the Bottom Shelf (A) by inserting Bolts (BB)
through the two-hole Plastic Connector Blocks (AA).
Tighten with a Phillips screwdriver.
BB
BB
AA

11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
5Attaching the decorative base panel
6Installing the USB port
Assembly (continued)
H
F
E
Locate the Decorative Base Panel (F).
Insert Bolts (CC) through the Flat Washers (DD) to secure
the Decorative Base Panel (F). Tighten with a Phillips
screwdriver.
Locate the Center Shelf (H).
Slide the USB output (EE) through the opening in
the Center Shelf (H).
Carefully secure the USB output (EE) in place
using Screws (FF) and a Phillips screwdriver.
DD
CC
EE
FF

12
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
Locate the Left Partition (I) and the Right
Partition (J).
Attach the Magnetic Spring Door
Catches (GG) to the Left Partition (I) and
the Right Partition (J). Secure each catch
using Screws (HH) where indicated by
the diagram.
Align the Center Shelf (H) between the Left and Right Partitions (I and
J). Push together, inserting the pre-installed screws on the Center
Shelf (H) into the holes on the Left and Right Partitions (I and J) as
shown.
Tighten the fasteners on the Left and Right Partitions (I and J) using a
Phillips Screwdriver.
7
8
Attaching the door catch
Attaching the center assembly
I
I
J
J
H
GG
HH

13
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
Align the holes on the edges of the Center Assembly (H) with the holes on the Bottom Shelf (A).
Insert Screws (II) through the Bottom Shelf (A) and into the pre-drilled holes on the edges of the center assembly as shown.
Securely tighten all screws using a Phillips screwdriver.
Find the pre-attached metal plate bracket
behind the top surround rail. Rotate the bracket
to span the joint of the top surround rail and
side surround rail.
Secure the surround bracket with a Screw (JJ).
Repeat to secure both sides.
9Attaching the base
10 Securing the surround brackets
A
H
II
JJ

14
11 Attaching the side panels
Assembly (continued)
P
L
A
II
K
BB
AA
Align the Left and Right Side Panels (K and L) with the
Bottom Shelf (A).
Insert Screws (II) through the Bottom Shelf (A) and into
the pre-drilled holes on the edges of the Left and Right
Side Panels (K and L) as shown.
Securely tighten using a Phillips screwdriver.
Locate the Top Front Rail (P).
Insert Bolts (BB) through the two-hole Plastic
Connector Blocks (AA) and into the pre-drilled holes
on the Top Front Rail (P) as shown.
Tighten Bolts (BB) with the Phillips screwdriver.
12 Attaching the top front rail

15
13 Attaching the top front rail
Assembly (continued)
N
M
M
P
Align the plastic connector blocks on the Top Front Rail
(P) with the pre-drilled holes on the Right Partitions
(I and J) and Side Panels (K and L) .
Secure the Top Front Rail (P) to the Side Panels (K and
L) by screwing Bolts (BB) through the plastic connector
blocks and into the pre-drilled holes on the Side Panels
(K and L). Tighten Bolts (BB) with a Phillips screwdriver.
Locate the Back Panels (M) and the Center Back
Panel (N).
Slide the Back Panels (M) into the grooves between
the center partitions and the outer side panels as
shown. Slide all the way down until the Back Panels
(M) meet the bottom shelf.
Slide the Center Back Panel (N) into the grooves
between the center partitions. Slide all the way down
until the Center Back Panel (N) meets the bottom of
the center shelf.
14 Attaching the back panels
L
K
J
I
BB

16
G
BB
Place the Top Panel (G) on top of the main assembly while aligning the pre-installed screws with the screw holes on
the edges of the main assembly.
After inserting the screws (BB) into the holes, tighten the fasteners from underneath the Top Panel (G) using a Phillips
Screwdriver as shown.
15 Attaching the top panel
16 Securing the top front rail
Secure the top front rail to the main assembly by
fastener through the plastic connector blocks and into
the side panels.
Assembly (continued)

17
17
Assembly (continued)
Place the Back Panel Brackets (MM) between
the back panels and the grooves of the
assembly as shown.
Fasten each Back Panel Bracket (MM) using
Screws (LL). Repeat until all brackets are
securely in place as indicated by the diagram.
18
Securing the back panels
Assembling the rolling doors
R
Q
Locate the Left and Right Rolling Doors (Q and R).
Place the Rolling Door Hangers (NN) on the outside of
the Left Rolling Door (Q).
Insert Bolts (BB) through Flat Washers (DD) and into the
pre-drilled holes on the other side of the door. Tighten
Rolling Door Hangers (NN) through the door using a
Phillips Screwdriver.
Repeat these steps for the Right Rolling Door (R).
LL
MM
DD
BB
NN

18
Assembly (continued)
OO
OO
PP
PP
Q R
Each Door Handle (PP) has pre-attached screws. Remove
these screws and place the Door Handles (PP) over the pre-
drilled holes in each Rolling Door (Q and R).
Place the pre-attached screws on the other side of
each Rolling Door (Q and R) and tighten with a Phillips
screwdriver through the door and into the Door Handle (PP).
Place the Door Bumpers (OO) on the inner edge of each
Rooling Door (Q and R) as indicated. Simply pull off the
adhesive and stick.
19 Attaching the door handles
20 Attaching the rolling doors
Align the Left Rolling Door (Q) with the roller track. With the rolling door hanger slipped over the roller track, push the Left
Rolling Door (Q) toward the center of the unit.
Repeat to attach the Right Rolling Door (R).
R
Q

19
Assembly (continued)
From the back of the unit, insert Screws
(RR) through the Sliders (QQ) and into the
pre-drilled holes in each Rolling Door (Q
and R).
21 Attaching the track guide
22 Attaching door stoppers
Insert the Bolts (TT) through the roller track to secure
the Door Stoppers (SS).
Q
QQ
TT
SS
RR
R

20
Assembly (continued)
T
UU
UU
VV
WW
XX
VV
S
Locate the Left and Right Cabinet
Doors (S and T).
Attach the Right and Left Pin Hinges
(UU and V V ) to the main assembly.
Slide the Left Cabinet Door (S) into
the grooves and insert Screws (WW)
to secure into place.
Repeat to attach the Right Cabinet
Door (T).
23 Attaching the cabinet doors
24 Inserting the adjustable shelves
U
U
U
U
Locate the four Adjustable Shelves (U).
Insert the Shelf Pins (XX) into the pre-drilled holes
on the inside of each cabinet side panel at your
desired height. Align all pins to the same height
to ensure your shelf is level.
Rest the Adjustable Shelves (U) on the Shelf Pins
(XX) as shown.